Article-No 0114580

Accu ACRJ453PFM

€3.90

Prices incl. VAT plus shipping costs
(Free shipping from 49,-€ order value within Germany)

Schon ab €0.06 mtl. finanzieren.

Weitere Informationen finden sie hier.

Cheaper elsewhere?

In stock

Accu ACRJ453PFM

RJ45 to 3 pin XLR Female

Properties

Colour:	Black
Connection 1:	RJ45
Connection 2:	XLR 3-pin female

Accu

Contact:

ADJ Supply Europe B.V.
Junostraat 2
NL - 6468 EW Kerkrade

E-Mail: info@adj.eu
Web: https://www.adj.eu

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Ähnliche Artikel

Cordial CDX-2 2m

Manufacturer:

Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.

€35.00*

Cameo cable DMX EX 001 - DMX extension cable IP65 1m

Manufacturer:

€5.90*

Accu DMX cable 110 OHM, 3 pin, 5 metres

Manufacturer:

€9.90*

Cordial CPH 5 DMX 1 PWR 1

Manufacturer:

The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.

€79.00*

Adam Hall DMX cable adapter XLR 5 M - XLR 3 F

Manufacturer:

24 AWG cables may be used for distances of up to 300 metres. For longer distances, or if more than 32 devices are to be supplied by one data line, we recommend using the Martin Optosplitter.Terminating resistor The data line must be terminated with a 120 Ohm resistor between Signal+ and Signal-. This is very important for error-free data transmission. When using a splitter, each data line must be terminated. The easiest way to terminate a data line is to use a termination plug (120 Ohm resistor between pins 2 and 3) on the data output of the last device on the data line.

€5.90*