This loudspeaker cable is characterised by its extra-thin, tubular outer sheath, which offers two advantages: In addition to the costs, the fire load is also kept very low - an important decision criterion for various installations.
If you value unadulterated, natural sound and dynamics, the SCORBIT is the cable for you. At the end of the transmission is the loudspeaker, but how the music gets there is far from irrelevant. You already have a good loudspeaker. Now it's all down to the cable - and the difference is audible! That's why top quality with an attractive design is required here too, because the cables are often laid visibly - or invisibly. Therefore as flat as possible. Thanks to a very tight stranding, the copper strand forms the surface necessary for the clean transmission of the high frequency range. The individual strands are braided in opposite directions. This means that this cable always returns to its original position, even after the most severe twisting.
The robust digital 110 Ohm cable for transmitting digital AES/EBU audio signals and digital DMX lighting control signals. This cable impresses with its very low capacitance and wave attenuation as well as very dense shielding, which are prerequisites for interference-free connections over long distances. The robust outer jacket made of PUR enables quick and easy insertion into cable ducts and stage trusses.
A speaker cable with parallel conductor routing is particularly suitable for laying cabling. The easily separable conductors with their transparent PVC sheathing can be optimally installed on tuft connectors and screw terminals. This cable is also used in the hi-fi sector due to its high number of individual conductors and low ohmic values.
Where brute force makes sense... are at work and they are not exactly squeamish with the lines. They often don't have time to be careful. This robust cable is specially designed for loudspeakers and fulfils all special technical requirements. Low-oxygen copper strands ensure better sound and a longer service life. All PVC versions are easy to reel.
The symmetrical MY203 is made of highly flexible stranded wire (28 x 0.10 mm), just as it should be for a patch cable. Tin-plated strands and the spiral shield, which is also tin-plated, ensure faster assembly. Thanks to the compact diameter of just 4.3 mm, even 3-pin stereo mini jack plugs can be fitted to it.
A speaker cable with parallel conductor routing is particularly suitable for laying cabling. The easily separable conductors with their transparent PVC sheathing can be optimally installed on tuft connectors and screw terminals. This cable is also used in the hi-fi sector due to its high number of individual conductors and low ohmic values.
The wires glow and the crowd goes wild when the speaker walls are turned up all the way. It's not just the tempers that heat up, but also the cables. Here too, top performance is required from the cable, which means the outer jacket of the cable must be as thick as an elephant's skin. It should also be flexible, robust, tread-resistant, easy to reel and reusable.
If you value unadulterated, natural sound and dynamics, the SCORBIT is the cable for you. At the end of the transmission is the loudspeaker, but how the music gets there is far from irrelevant. You already have a good loudspeaker. Now it's all down to the cable - and the difference is audible! That's why top quality with an attractive design is required here too, because the cables are often laid visibly - or invisibly. Therefore as flat as possible. Thanks to a very tight stranding, the copper strand forms the surface necessary for the clean transmission of the high frequency range. The individual strands are braided in opposite directions. This means that this cable always returns to its original position, even after the most severe twisting.
Where brute force makes sense... are at work and they are not exactly squeamish with the lines. They often don't have time to be careful. This robust cable is specially designed for loudspeakers and fulfils all special technical requirements. Low-oxygen copper strands ensure better sound and a longer service life. All PVC versions are easy to reel.
Double-coupled shields better. Like the SC-SYMBIOTIC, but a little more exclusive thanks to the double and counter-rotating copper spiral shield and wire pairs embedded in PVC. This makes it even more flexible. And the larger wire cross-section (2 x 0.38 mm2) makes it suitable for very long distances of over 100 metres.This cable is technically sophisticated and perhaps the best microphone cable on the world market. Your guests in the recording studio will be surprised by the low-noise transmission!
If you value unadulterated, natural sound and dynamics, the SCORBIT is the cable for you. At the end of the transmission is the loudspeaker, but how the music gets there is far from irrelevant. You already have a good loudspeaker. Now it's all down to the cable - and the difference is audible! That's why top quality with an attractive design is required here too, because the cables are often laid visibly - or even invisibly. Therefore as flat as possible. Thanks to a very tight stranding, the copper strand forms the surface necessary for the clean transmission of the high frequency range. The individual strands are braided in opposite directions. This means that this cable always returns to its original position, even after the most severe twisting.
Guitarists throw the cables back and forth like a lasso. That's why this cable has to be particularly sturdy and have a sophisticated inner workings. Musicians invest a lot of money in the first place, until they finally realise with frustration that the low-cost cable they have just bought is only suitable as an average shortwave receiver or even causes the entire sound of the expensive instrument to collapse. We have refrained from cheap products and offer a top quality cable at a fair price. The SC-SPIRIT has thick insulation between the core and shield. This improves the capacitance values and guarantees loss-free treble reproduction even with longer cables. To avoid crackling and hum interference, we use a special conductive carbon shield and a copper braided shield. When soldering, care should be taken to ensure that there is no contact between the carbon screen and the inner conductor. Your audience will be amazed at the sound of this cable!