BiAmp

The Biamp MASK6C is a low impedance cabinet speaker with a unique design and a crystal clear sound for all music applications from background music to music at dance volume. The cabinet is made of high quality PP4 ABS plastic and the grille is made of aluminium. The high-quality construction of the MASK6C guarantees long-lasting indoor and outdoor use, even under extreme environmental conditions. MASK6C is based on a powerful 6.25″ paper cone woofer with 1″ silk dome tweeter and delivers high sound pressure with low distortion. This ensures outstanding clarity across the entire frequency spectrum. The integrated 3-stage protection circuit and high-quality components make the MASK6C a reliable, fail-safe speaker even under heavy loads. The revolutionary ClickMount bracket makes the MASK6C the most installation-friendly speaker that can be installed in record time. The predefined grid steps ensure perfect alignment for every speaker. With the discrete cable management system, the integrated spirit level and the input and output connectors, all cabling is done on the bracket. To finalise the installation, the speaker is simply hooked into the ClickMount bracket.

The SDQ5P-W stereo speaker set consists of an active and a passive speaker. Thanks to its simple design, it is ideal for use in audiovisual applications (e.g. next to a flat screen or projection screen), as a small monitor system or for smaller presentations.The active speaker is equipped with a volume and tone control (bass/treble), a clip indicator and a two-channel 2 x 30 W amplifier. Inputs are available in various formats (Euroblock balanced, RCA and stereo mini jack) and allow flexible connection of players such as PCs, CD players or MP3 players. Both speakers are magnetically shielded and offer improved bass reproduction thanks to the special DBT Reflex Tuning. The scope of delivery includes a 2.9 metre mains and speaker cable, which connects the active and passive speakers.From a minimum order quantity of 12 sets, the SDQ5P can also be supplied in all other RAL colours.

The PT8120 provides 8 high quality toroidal transformers with 120W power handling for the PA8250 Power Amplifier. The transformers can be configured: 8x120W or 4x250W. A monitor loudspeaker has been integrated so that the eight channels can be monitored. The zones are activated at the front using pushbuttons.

The Biamp PCR3000RMKIII is a professional multi-format music player forCD/USB/SD cards with integrated FM RDS and DAB+ tuner. In addition, the device now has an internal Bluetooth receiver that can be connected to any Bluetooth-enabled music source such as a smartphone or computer. The PCR3000RMKIII also offers numerous independent analogue outputs, coaxial and optical digital outputs for the CD/USB/SD player and an RS232 port for communication with integrated control systems.At the front, the device has a USB and SD card slot and a further USB input at the rear (to prevent the memory stick from being removed by unauthorised persons). At the rear, the device has a switch for selecting between the Auto Play and Cue operating modes. If the PCR3000RMKIII is operated in Auto Play mode, the device always starts playback automatically when it is switched on. In Cue mode, on the other hand, the device expects a play command after switching on or after selecting another track.The analogue output level can be adjusted to the output level of other audio sources on the rear panel. A combined output is also available there. By default, this output transmits the music signal from the CD/USB/SD player. If the CD/USB/SD player is not emitting a signal, this output is automatically assigned to the tuner output (FM or DAB+) after a few seconds, provided the tuner is not switched to standby. The PCR3000RMKIII can be controlled via the controls on the front panel, via the supplied infrared remote control or via RS232 commands.

The Apart CM20T 2-way built-in loudspeaker is suitable for both 16 Ohm and 70 / 100V operation. In 16 Ohm mode, up to four CM20T speakers can be connected to each channel of a standard 4 Ohm amplifier. For 70 / 100V operation, the CM20T is equipped with a high-quality 20W / 100V transformer with various power taps (20 - 10 - 5 - 2.5 W). This speaker is therefore ideal for high ceilings or locations with high background noise levels. The speaker's sturdy ABS housing accommodates a moisture-resistant 6.5″ woofer made of reinforced polypropylene in combination with a 1″ tweeter. This configuration makes the CM20T the ideal choice for the distribution of microphone announcements and all types of background sound. With an aluminium grille, it can also be used in damp environments such as bathrooms and kitchens. With the quick mounting system using just three screws and the Quick-Fix connector with clear colour coding for the correct contacts on the transformer, installation of the CM6T is quick and easy. The screws are concealed behind the speaker grille so that the modern and striking design is not compromised. The elegant Apart logo can be removed if required.

Biamp uses an optimised 2.5" full-range system in an attractive and easy-to-install plastic housing. Expand the system with our brand new SUBLIME subwoofer and you won't believe your ears at the superiority of this compact sound system!Whether in the home cinema area, restaurant, bistro or cellar bar: the Mask-2 speaker is small in size and yet absolutely impressive in sound.

The affordable ZONE4 preamplifier makes it possible to control four stereo zones with just one device. Music from one of the four connectable music sources can be played in each of the four zones. It is also possible to freely assign three microphones to each zone. Other major advantages of the ZONE4 are the digital displays and control options via wall-mounted remote controls (ZONE4R) or RS232. ZONE4 offers a clear competitive advantage even for the most demanding tasks. The ALINP local input panel can be used to equip remote zones with a local microphone or line source and control their volume. This 4-stereo zone preamplifier offers the option of playing a different signal source in each zone and connecting three assignable microphones. One of these microphones can have priority or be a selective 4-zone paging microphone. The device can be controlled via the front panel, an optional digital wall-mounted remote control, the RS232 connection or via the serial infrared interface.

The enclosure is only 12 cm deep and the connection panel is invisible when mounted with the included brackets. This subwoofer reproduces a convincing low bass range completely unobtrusively. Installation is child's play and can be realised even under difficult conditions and where space is limited in the room.The design of this subwoofer has it all! A dual voice coil bass driver with a diameter of 6.5" and a specially developed flat cone works in an optimised sixth-order bandpass cabinet. Therefore, despite the very compact cabinet, we achieve a deep, even transmission of the lower octave with very good controlled bass behaviour, even at higher levels.

Biamp uses an optimised 2.5" full-range system in an attractive and easy-to-install plastic housing. Expand the system with our brand new SUBLIME subwoofer and you won't believe your ears at the superiority of this compact sound system!Whether in the home cinema area, restaurant, bistro or cellar bar: the Mask-2 speaker is small in size and yet absolutely impressive in sound.