The Blustream MFP62 multi-format presentation switcher is the video switch for switching a wide variety of video sources to 2 outputs. On the input side, it has 3 x HDMI, 1 x USB-C, 1 x Display Port and 1 x VGA connections. The outputs are HDMI and equipped with video scalers. All inputs/outputs support 4K UHD 60Hz 4:4:4 video. A mic / line and a stereo line input incl. embedding enables the integration of microphones or external audio players. The analogue and digital audio outputs are compatible with all common HDMI audio formats. Depending on requirements, the MFP62 can be controlled via the supplied infrared remote control, a media control, the device font or the intuitive web GUI.The MFP62 is an ideal solution for conference and classrooms, boardrooms and huddle rooms.
The Blustream DA11ADE converts two digital Dante® channels to two unbalanced or balanced analogue audio outputs. It is powered via PoE (Power over Ethernet) from any PoE network switch. Alternatively, it can also be operated via an external 12V power supply unit. The DA11ADE also supports AES67 RTP audio transport.
The Blustream DA22DIG converts 2-channel analogue or digital audio to Dante® network audio and vice versa. The DA22DIG features analogue and digital audio connections, selectable via dip switches, and is a plug and play device powered via PoE (Power over Ethernet) or via a 12V power supply. The DA22DIG also offers support for microphones including 48V phantom power and support for AES67 RTP audio transport.
The Blustream MFP31 is a practical small video switcher in desktop format. Thanks to the various input formats / connector types, it is compatible with a wide range of modern devices and can therefore be used as a universal, mobile interface for conferences and presentations. On the input side, it has 1 x HDMI, 1 x USB-C, 1 and 1 x MiniDisplayPort connections. The output is designed for HDMI. The inputs / outputs support 4K UHD 60Hz 4:4:4 video. Source switching can be automatic or manual.The MFP31 is an ideal solution for conference and classrooms, boardrooms and huddle rooms.
The Blustream DA11AEN converts two unbalanced or balanced analogue audio inputs into two digital Dante® channels. It is powered via PoE (Power over Ethernet) from any PoE network switch. Alternatively, it can also be powered by an external 12V power supply. The DA11AEN also supports AES67 RTP audio transport.
The Blustream DA11USB encodes 2-channel USB audio into a digital Dante® signal or decodes a digital Dante® signal into 2-channel USB audio. The DA11USB has both USB Type-B and USB-C connectors, which can be selected via a switch, and is a plug & play device that is powered either via PoE (Power Over Ethernet) or with 5 V from the USB device. The DA11USB also supports AES67 RTP audio transport.
The Blustream HEX150CS-KIT offers the highest level of performance and flexibility for HDMI video transmission. The HEX150CS-KIT supports HDMI 2.0, bi-directional IR, RS-232 and PoH (PoE) up to 150m (long range) over a single CAT cable. In addition, the HEX150CS-KIT offers ARC (Audio Return Channel) and 10/100 Ethernet throughput. 4K 60Hz 4:4:4 UHD video is transmitted over 100m.
The Blustream DA44AU is a digital Dante® audio converter with four inputs and four outputs. The DA44AU enables the connection of non-Dante® audio sources such as mixing consoles, amplifiers, computers and Blustream matrix/distribution products as audio sources in a Dante® network, as well as the reconversion of a Dante® signal to an analogue audio signal. The DA44AU supports both balanced and unbalanced audio signals as well as microphone line level inputs including 48V phantom power. The DA44AU also supports AES67 RTP audio transport.
The PAC500AU is a simple solution for transmitting audio signals without interference over long distances (up to 500m cable). A set consists of two units, each of which can be used for both transmitting and receiving. The PAC500AU does not require any power supply and there is no conversion to a digital format - it simply utilises the better shielding of CAT cables compared to conventional audio cables to transmit the signals. This also means that this system requires no special effort to set up - simply plug and play.
The Blustream HEX70HDU-KIT is an HDBaseT link for the transmission of video signals up to 70m. For seamless interaction with all modern devices, the HEX70HDU transmitter has HDMI, USB-C and DisplayPort inputs with resolutions up to 4K UHD, 60Hz, 4:4:4, incl. High Dynamic Range (HDR). It transmits high-resolution 4K signals up to 40m, 1080p signals up to 70m. The USB-C port is not only an input, but can also be used as a power supply or charging port for connected devices. The audio breakouts on the HEX70HDU receiver play out the audio signal associated with the video in analogue stereo or digitally as an S/PDIF signal. It is possible to automatically switch on displays connected to the receiver via CEC, RS-232 and infrared. There is an HDMI input on the receiver for playback of a local signal source. The signal sources can be switched automatically on both the transmitter and the receiver.The options for controlling the HEX70HDU-KIT are comprehensive. The classic method via the front panel is just as possible as control via RS232, TCP/IP or infrared. Control via web GUI is particularly convenient. For maximum compatibility with as many devices/contents as possible, the HEX70HDU-KIT complies with the HDCP2.2 standard and includes comprehensive EDID management.
