Cioks
Contact:
CIOKS ApS
Hastrupvej 17C
DK - 4600 Køge
E-Mail: info@cioks.com
Web: https://cioks.com/
Cioks Flex Type 4
€4.50
card.manufacturer:
Type 4 flex cables are green and have a positive 5.5/2.5mm DC plug in the centre. This flex cable type is mainly used for the power supply of all Eventide Factor and H9 pedals, but is also widely used for many AC pedals.
Cioks 4HEX
€6.00
card.manufacturer:
This is a mounting kit with 4 pcs. 8mm long hexagonal spacers including 4 screws and an Allen key. It can be used as a replacement kit for mounting a CIOKS Link power supply under a Pedaltrain pedalboard. It can also be used to create a space between a CIOKS power supply and a Temple Audio pedalboard to make room for the finger screws of the quick release pedal plates.
Cioks Flex 2200 Series Voltage Doubler
€5.00
card.manufacturer:
By using two isolated sockets, the Series Adapter Flex provides the sum of the voltages of the two sockets used. This Adapter Flex cable should be used in combination with one of the CIOKS Standard Flex cables if you want to operate an 18V, 24V or even a 40V pedal. It not only offers you the higher voltage, but also the option to choose the type of plug at the pedal end and the length you need. The plug type and length are determined by the standard flex cable used with the Flex adapter. If you are looking for an easier way to power an 18V pedal with a standard 5.5/2.1mm centre negative DC plug (BOSS standard), please take a look at CIOKS Stack Flex.Please note that the Flex series adapter connects the two sockets used in series. These two outlets must be isolated from each other. You will receive the sum of the voltages (V) and not the current (mA). If you use it with two 9 V sockets with 100 mA each, you will get 18 V and still a maximum current of 100 mA. If you use it with two 9 V sockets with 200 mA each, you will get 18 V and a maximum of 200 mA. If you set it to 12V with two sockets with max. 200mA, you get 24V and still max. 200mA.
Cioks Flex 8800 Parallel Current Doubler
€5.00
card.manufacturer:
By using two isolated outputs, the Flex parallel adapter gives you the sum of the maximum currents of the two isolated outputs used. This adapter cable should be used in combination with one of the CIOKS standard Flex cables if you need to operate pedals with higher current requirements. It not only offers you a higher current rating, but also the option to choose the connector type on the pedal side and the cable length you require. The plug type and length are determined by the standard Flex cable used with the Flex adapter.
