It is worth mentioning that the DSP, which uses a high-quality A/D converter from BurrBrown, only filters the woofer of the subwoofer. The signal path for the satellite speakers remains purely analogue and undergoes no A/D, D/A conversion. With the "Pure Satellite" function, when activated, the subwoofer and the DSP filter section are bypassed completely. In this case, the satellite signals are routed unfiltered to the outputs and only the volume of the satellites can be varied.The volume of the subwoofer and the entire stereo system can be controlled using the remote control supplied as standard with the subwoofer - all from the comfort of your listening position.The special feature of our extremely powerful and high-precision subwoofers is the passive cone used, which replaces the usual bass reflex channel. This design completely eliminates disturbing flow noise caused by air turbulence. Audible tube resonances (with lambda/2 + multiples) are due to the principle of an open tube on both sides (bass reflex channel) and can be eliminated with the passive membrane design in all EVE Audio subwoofers. Furthermore, the suspension of the passive cone has a restoring force below the tuning frequency, which reduces inaudible subsonic excursions. This means less excursion in the operating range and thus reduced intermodulation distortion.A passive diaphragm enables a particularly low tuning or lower cut-off frequency in a compact housing.
The SC204 has a 4" SilverCone chassis with a stable honeycomb structure that works with a 1" voice coil. In combination with the entire system, this ensures a large linear excursion of the glass fibre reinforced cone. Measured against the size of the loudspeaker, this chassis design achieves unrivalled dynamics. In addition to unrivalled transparency, the SC204 also surprises with powerful and precise reproduction of low frequencies. The mounting thread embedded in the base plate allows the SC204 to be mounted on standard microphone or speaker stands and the mounting options on the rear allow wall mounting.
Due to its size, the SC208 can handle a wide range of low frequencies. The robust, glass fibre-coated 8" SilverCone chassis with a stable honeycomb structure is driven by a 1.5" voice coil. As a result, low frequencies from 36 Hz are reproduced powerfully and dynamically. All EVE Audio studio monitors are equipped with high-resolution DSP electronics. A rasterised encoder potentiometer with LED ring on the front of the loudspeaker enables precise adjustment of the volume and the various filters for customised adaptation to your workplace.
The SC205 has a 5" SilverCone chassis with a stable honeycomb structure that works with a 1" voice coil. In combination with the entire system, this ensures a large linear excursion of the glass fibre reinforced cone. Measured against the size of the loudspeaker, this chassis design achieves unrivalled dynamics. In addition to unrivalled transparency, the SC205 also surprises with powerful and precise reproduction of low frequencies. The mounting thread embedded in the base plate allows the SC205 to be mounted on standard microphone or speaker stands and the mounting options on the rear allow wall mounting.
Due to its size, the SC207 can handle a wide range of low frequencies. The robust, glass fibre-coated 6.5" SilverCone chassis with a stable honeycomb structure is driven by a 1.5" voice coil. As a result, low frequencies from 44 Hz are reproduced powerfully and dynamically. All EVE Audio studio monitors are equipped with high-resolution DSP electronics. A rasterised encoder potentiometer with LED ring on the front of the loudspeaker enables precise adjustment of the volume and the various filters for customised adaptation to your workplace.
