Litecraft

The OutLED AT60.zoom impresses with a number of new features that make the spotlight even more flexible to use. It is based on the OSRAM Ostar 60 Watt RGBW LED chip. This makes the OutLED AT60.zoom the first LITECRAFT LED spotlight to feature motorised zoom and a point light source that appears more harmonious in backlighting. A further decisive advantage is the natural shadow mapping. The colour shadow patterns familiar from individual multicolour LEDs are eliminated.To adapt to all lighting situations, the device has a stepless, motorised zoom in the range from 5.5 to 40 degrees. The high-quality optics have been developed with a particular focus on the best possible colour mixing in all beam areas.The device is controlled via DMX 512, optionally in 8/-16 bit. The device also has programs and colours for stand-alone operation. Thanks to the OLED display and clear menu system, all settings are easy to make, even without operating instructions. An extra feature is the battery buffering of the OLED display, which allows settings and addressing to be made even without power.The device has protection class IP 65 and, unlike its predecessor, has IP-protected powerCON True1 and XLR 5-pin connectors on the device. The Y-bracket for suspended or upright mounting is equipped with an M10 thread for holding accessories.

With the BeamX.7, LITECRAFT presents the successor to the MiniPAR AT10. Compared to its predecessor, the BeamX.7 has significantly increased performance and professional features.With its advanced optical system, the BeamX.7 achieves a significantly increased output despite reduced power consumption. The characteristics of the beam are more defined, which expands the classic application possibilities as a truss toner to include beamwork effects.As with all new LITECRAFT products, the housing and mechanics have been optimised. The device has a new Y-bracket that can be optimally locked in any position. The high-quality, milled aluminium housing is elegant, robust and thermally optimised so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations.The BeamX.7 has XLR 5-pin and powerCON connectors - both as input and output. This means it can be easily looped through and discreetly wired. Alternatively, it can be controlled wirelessly via an IR remote control or with an optionally available LumenRadio CRMX module. Internal programs and fixed colours are also available and, like all configurations, can be selected quickly and easily on the LC display.

With the BeamX.7 IP, LITECRAFT now also offers the successful BeamX.7 in a weatherproof outdoor version. Despite its low power consumption, the device has a high light output. The beam characteristic is narrowly defined at ten degrees, which extends the classic application possibilities as a truss toner to include beamwork effects. For a wider beam angle, the frost filter supplied can be quickly and easily mounted on the device, extending the beam to around 25 degrees.Like all LITECRAFT products, the BeamX.7 IP has a Y-bracket that can be optimally locked in any position. The high-quality die-cast aluminium housing is elegant, robust and thermally optimised so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations. With its compact dimensions, the device naturally also fits into standard 290 mm trusses.The BeamX.7 IP has an XLR 5-pin IP version and powerCON True1 connectors - both as input and output. This allows the device to be easily looped through and discreetly wired. Alternatively, it can be controlled via an IR remote control. Internal programs and fixed colours are also available, which, like all configurations, can be selected quickly and easily on the LC display.

The BX.7 from LITECRAFT is a multifunctional and outdoor-capable spotlight that has been developed for a wide range of applications. The BX.7 is based on the successful concept of the BeamX.7 IP and, in addition to the identical optics and electronics, also has an integrated lithium-ion battery and a LUMENRADIO CRMXchip. This makes this spotlight suitable for completely wireless operation both indoors and outdoors.The device has the same high light output as BeamX.7 and BeamX.7 IP. The beam angle is narrowly defined at ten degrees, which extends the classic application possibilities as a truss toner to include beamwork effects. For a wider beam angle, the frost filter supplied can be quickly and easily fitted to the device, extending the beam to around 25 degrees.Like all LITECRAFT products, the BX.7 also has a Y-bracket that cannot slip through. The high-quality die-cast aluminium housing is elegant, robust and thermally optimised so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations. With its compact dimensions, the device naturally also fits into standard 290 mm trusses.The BX.7 has an XLR 5-pin (XLR 3-pin as an additional option) IP version and powerCON True1 connectors - both as input and output. This means that the device can not only be safely charged, but also permanently supplied with mains power for longer-term use. A charge level indicator provides information about the battery status at all times. In addition, an integrated emergency circuit allows operation as an emergency power lamp. Once activated, the device reacts to corresponding signals or settings in mains power mode. In the event of a power failure, it automatically switches to battery operation with a selectable light colour.The BX.7 can be controlled in several ways, depending on the application. Wired control via DMX 512 is of course standard. Another option is professional wireless DMX transmission via the integrated CRMXchip from LUMENRADIO. The CRMXchip is not only compatible with LUMENRADIO transmitters, but also with W-DMX products from Wireless Solution. The device also has internal fixed colours and programs. These can be selected directly on the device or conveniently and quickly using the infrared remote control supplied.

The WashX.21 from LITECRAFT adds a powerful outdoor floodlight to the X series. Compared to many other LED-based floodlights on the market, which with their very narrow beam angles are actually just larger LED spotlights, the WashX.21 can rightly be described as an LED wash. In combination with high-quality optics, the 21 RGBW LEDs provide a homogeneous wash effect. Saturated colours and pastel shades are mixed very well and impress with their brilliance.The device is controlled via DMX 512 and also has programs and colours for stand-alone operation. The white balance and PWM frequency can also be flexibly adjusted. Thanks to the OLED display and clear menu system, all settings are easy to make, even without operating instructions. An extra feature is the battery buffering of the OLED display, which allows settings and addressing to be made even without power, as well as the optional locking of the display to prevent unauthorised use.The IP 65 protection class also enables long-term outdoor use. The cabling is flexible and simple with IP-protected plug connectors in the powerCON True1 and XLR 5-pin versions.