TLS Communication

Function:Reception of VGA; audio; HDMI; RS232; and IR signals via 100 metre CAT cable Audio deembedder and embedderRS232 pass-through and controlVideo formats / resolution:HDMI 2.0a, Full HD/4K*2K / 3D4K@60Hz (4:4:4), plus HDR 1080p@60HzHDCP-2.2/HDCP 1.x and DVI compliant VGA up to 1920x1200@60HzSmart CSC technology supports 6G or 3G video at the output, depending on the sink Transmission length:1080p up to 100m/330ft, 4K up to 70m/230ft. Inputs: RX1 x RJ 45 socket/1 x M3 screw connectorOutputs: RX1 x HDMI socket / 1 x RS232 9p.HD socket/ 2x 3.5 jack socket (IR); 3x RCA socket (audio)Audio formats:Auto Audio VideoSync lip-syncDTS-HD Master AudioDolby True HDARC Audio Return ChannelInput: 1x RJ 45 socket (HDBaseT); M3 screw connectionOutput:3x RCA socket; HDMI socket; 2x 3.5 jack socket

The MF100T HDBaseT wall-mounted module is a device for transmitting VGA/audio; HDMI; RS232; and IR signals via CAT cables up to 100 metres. The transmitted control signals are bidirectional and can control and monitor connected, suitable devices. The module is built into an attractive front panel and installed in suitable walls or furniture of all kinds using 4 screws. The MF100T wall installation module is a stand-alone device that can be used as a simple signal transmitter. The module can also be installed as a system component in all small, medium and large AV systems. The MF 100 can be controlled reliably and error-free via buttons on the device as well as via external keyboards using RS232 or IR commands. The wall-mounted module can also switch between the connected input signals VGA and HDMI by means of automatic signal recognition (factory setting). The RS232 and IR control signals are transmitted to the MF100 transmitter via separate plug connectors or jack sockets and forwarded directly to the corresponding playback device via the HDBaseT interface. TheHDBaseT wall installation moduleMF100T is supplied in an aluminium front panel and is ready for installation in walls, cable ducts and much more. Power can be supplied via a plug-in power supply unit or via Power over HDBaseT. Suitable receivers connected via Power over HDBaseT can also be supplied with power in an AV system.