DPA 4288-DL-F-F10-LH

Directional pattern: Cardioids

Operating principle: Pressure gradient

Cartridge type: Pre-polarised capacitor

Frequency response: 20 Hz - 20 kHz

Effective frequency range, ±2 dB, near field 2-3 cm (0.8 - 1.2 in.): 100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)

Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa

Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 μPa (max. 28 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)

Distortion, distortion factor < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak

Distortion, distortion factor < 1% - KERN: 134 dB SPL RMS, 137 dB SPL peak

Dynamic range - Legacy: Typ. 97 dB

Dynamic range - CORE: Typ. 111 dB

Max. Sound pressure level, distortion factor 10%: 144 dB SPL peak

Rated output impedance: 30 - 40 Ω

Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter

Output balance principle: Signal balanced with DAD6001-BC XLR adapter

Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter

Power supply unit (for full power): For wireless systems: Min. 5 V - max. 10 V via DPA adapter: With DAD6001-BC: P48 (phantom power). Works from 12 V

Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter

Connectors: MicroDot, TA4F mini XLR, 3-pin LEMO, mini jack

Colour: Black, beige or brown

Weight: Single ear: 10 g (0.35 oz)

Diameter of the microphone: 5.4 mm (0.21 inch)

Length of the microphone: 12.7 mm (0.5 inch)

Cable length: 1.3 m (4.3 ft)

Colour of the cable: Black, beige or brown

Diameter of the cable: 1.6 mm (0.06 in.)

Polarity: Positive increasing sound pressure generates positive voltage at the MicroDot pin

Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

Relative humidity (RH): Up to 90%