DPA 4661-OC-H-B00
€541.45*
Prices incl. VAT plus shipping costs
(Free shipping from 49,-€ order value within Germany)
Delivery on request
Directional pattern: Omnidirectional
Operating principle: Pressure
Capsule type: Pre-polarised capacitor
Frequency range: 20 Hz - 20 kHz
Frequency range +/- 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity nominal +/- 3 dB at 1 kHz: 6 mV / Pa; -44 dB re. 1 V / Pa
Equivalent noise level, A-weighted type. 26 dB (A) re. 20 MuPa (max. 28 dB (A))
Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S / N ratio (A-weighted): Typ. 68 dB (A), re. 1 kHz at 1 Pa (94 dB SPL)
Total Harmonic Distortion (THD): <1% THD up to 137 dB SPL peak
Dynamic range: Typ. 111 dB
Max. Sound pressure, peak before clipping: 144 dB
Output impedance: From MicroDot: 30 - 40 Ohm. From DAD6001: 100 Ohm
Max. Cable length: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Output balance principle: Signal equalisation with DAD6001-BC XLR adapter
Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Power supply (for full power): min. 5 V to max. 50 V to DPA adapter for wireless systems
Power consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
Connection: MicroDot
Polarity: A positive increasing sound pressure generates a positive voltage on the MicroDot pin (and pin 2 on the DAD6001 XLR adapter).
Temperature range: -40 to 45 degrees C (-40 to 113 °F)
Relative humidity (RH): Up to 90%
Dimensions: Microphone (Dia.xL): 5.33 x 17.78 mm (0.21 x 0.7 ")
Cable (Dia.xL): 1.80 m x 2.2 mm (5.9' x 0.09")
Weight: 13.04 g (0.46 oz) including cable and MicroDot connector
This microphone is acoustically identical to the d:screet™ 4060. The sensitivity is designed to cope with higher sound pressure levels (SPL). These usually occur when you are close to a sound source or when the microphone has to pick up high-level signals without interference.
The d:screet™ 4661 Heavy Duty achieves up to 144 dB SPL before clipping. This makes it one of the best miniature microphones for use with very loud and powerful instruments such as snare drum, guitar, bass, loudspeaker cabinets and other sound sources with high SPL. The heavy duty strain relief and a thick cable are ideal for live environments, which can be quite harsh at times.
Contact:
DPA Microphones A/S
Kokkedal Industripark 101
DK-2980 Kokkedal
E-mail: info-de@dpamicrophones.com
Web: https://www.dpamicrophones.com/de/
Login