Fischer Amps Hard Wired Inear Body Pack XL
€269.00*
Prices incl. VAT plus shipping costs
(Free shipping from 49,-€ order value within Germany)
In stock
Dimensions L x W x H (in mm): 125 x 136 x 32
Weight: approx. 430 g without battery
Input sockets: 3 x Neutrik XLR socket 3-pin with locking mechanism
Output socket: 3.5 mm stereo jack socket, 1 x XLR microphone link out
Frequency response: 30 Hz - 20 KHz +/- 2 dB
Minimum connection impedance of the receiver: 12 Ohm per side
Input impedance: 15 kOhm channel 1 and channel 2, 2 kOhm microphone input (with PAD button=15 kOhm)
Nom. Balanced input level: 0 dBV (channel 1 and channel 2)
Max. Input level balanced: +4 dBV (channel 1 and channel 2)
Limitation of the input signal: from +5 dBV (channel 1 and channel 2)
Microphone input level: from -60 dB to +6 dB
Max. Output power at 20 ohms: 40 mW per channel
Max. Operating current: 65 mA (with phantom power switched on 120-140 mA)
Power supply: 9V block alkaline battery or 8.4V NiMH battery from 270mAh
DC input socket: External input voltage DC 9V (internal contact +, external contact -)
Battery operating time: with alkaline battery (500 mAh) approx. 7.5 hours, with NiMH battery (270mAh) approx. 4 hours (depending on listening volume)
The Body Pack XL has the same functionality as the Fischer Amps Hard Wired In Ear Belt Pack, but an additional microphone input has been integrated so that a microphone signal can be added to the incoming stereo or mono mix. The built-in low-noise microphone preamp has the standard features such as switchable 48V phantom power, a PAD switch to attenuate the input signal by 16 dB and a gain control from 0 dB to + 60 dB.
There is also a parallel-out socket for the microphone input to allow the microphone signal to be looped through. Power is supplied by a 9V battery.
The device is ideal as a compact in-ear solution, e.g. in an orchestra, if the musician wants to add his own microphone signal to the incoming in-ear signal. The device is also ideal as a technician's tool for monitoring microphone signals.
Contact:
Fischer Amps
Jochen Fischer
Hans-Ulrich-Breymann-Str. 3
74706 Osterburken
E-mail: info@fischer-amps.de
Web: http://www.fischer-amps.de
Login
Zubehör
Cutsomers also bought
