Skip to main content Skip to search Skip to main navigation
Showtec DR Pro Rack

LCD colour display with 128x160 pixels

8 memory locations for scenes, chases or shows

Manual control, real-time trigger, SMPTE/MIDI switch trigger, DMX trigger and DMX monitor

Storage space for 5 hours of recordings

4 recording modes: Manual, Auto, Semi-Auto & Smart

Internal memory: 2G

External memory: <8G

SMPTE mode: Event Trigger

SMPTE connection: 3-pin XLR

Display: 128x160p

Dimensions: 482x78x44

Weight: 1.1kg

The DR Pro Rack is a practical instrument for storing DMX values or entire scenes, chases or shows. The total recording time is 5 hours, whereby the data is distributed over 8 memories. The basic functions are easy to operate using the playback buttons on the front, making the device particularly suitable for inexperienced users. The device can be locked with a password.

Showtec

Contact:

Highlite International BV
Vestastraat 2
NL - 6468EX Kerkrade

E-Mail: receptie@highlite.com
Web: https://www.showtec-lights.com/de/

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Ähnliche Artikel

Showtec DB-1-4 4 Channel DMX Booster
Manufacturer:
The DB-1-4 is a universal DMX-512 optical splitter. It distributes the incoming DMX signal, in chain configurations, into four separate outputs with an additional "thru" port. The DB-1-4 has 3-pin and 5-pin XLR connections for easy connection. The device can be installed in any 19" housing or in the rack using the M10 slot on the rear. The light controller has clear LEDs to indicate the DMX signal status of each output and input.
€105.00*
Cameo SB 6 DUAL
Manufacturer:
€159.00*
EUROLITE DXT PoE Art-Net Node I
Manufacturer:
€155.00*
Showtec DMX-Merge 2 in 1
Manufacturer:
With the new Showtec DMX Merge, you can combine two DMX controllers into one DMX line or use a second desk as a back-up desk.The device has 3 modes:1) HTP (High Take Precendence) In this case, you can use two identical desks with the same addressing on one line. The DMX channel with the highest value has priority.2) Back-up mode. The device is connected to two DMX desks. Channel A has priority. If channel A fails or has no DMX, channel B takes over the show.3) Merge mode. Two desks can be combined for one line. For example, you can run a scene setter and DMX on one line. The scene setter controls channels 1-96, and channels 97 and higher are DMX-controlled: these positions can be freely addressed via dip switches.
€119.00*
Cameo SB8.3 - 8-channel DMX splitter / booster
Manufacturer:
The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX console or DMX devices. The input and the THRU socket for looping the signal through are duplicated on the front and rear of the CLSB83 and connected in parallel. Bright LEDs on the front panel indicate the DMX and power status of the channels, while the outputs are located on the rear panel. A 120 Ohm terminating resistor that can be switched to the DMX THRU output and the mains switch complete the equipment; the IEC cable is included in the scope of delivery. The rack brackets can be mounted on the rear of the device for easy access to all connections and 180° rotated installation. The Cameo DMX splitter and booster is also available in a 5-pole version (art. no. CLSB85).
€160.00*