Article-No 1166833

Swisson XMT-500

€769.00

Prices incl. VAT plus shipping costs
(Free shipping from 49,-€ order value within Germany)

Schon ab €13.69 mtl. finanzieren.

Weitere Informationen finden sie hier.

Cheaper elsewhere?

Delivery in 3-6 days

Swisson XMT-500

DMX Tester

RDM / Ethernet controller, DMX, RDM, Art-Net and sACN signal analysis

Cable testing and many other functions combined in a single device

Send Art-Net or sACN channels/universes

Send DMX values

Detection and configuration of RDM-capable devices

Receive Art-Net or sACN channels/universes

analyse received DMX signals

Monitoring the timings of received DMX and RDM signals

Check the correct pin assignment for XLR or RJ-45 cables

colour IPS TFT display, readable even in sunlight

Li-ion battery 3.6V, 3200mAh

rechargeable via USB-C

Dimensions: 122 x 75 x 43 mm

Weight: 445 g

Swisson

Contact:

Pro Lighting e.K.
Tannenstr. 9
85609 Aschheim

E-Mail: info@prolighting.de
Web: https://www.prolighting.de/

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Ähnliche Artikel

Showtec DB-1-4 4 Channel DMX Booster

Manufacturer:

The DB-1-4 is a universal DMX-512 optical splitter. It distributes the incoming DMX signal, in chain configurations, into four separate outputs with an additional "thru" port. The DB-1-4 has 3-pin and 5-pin XLR connections for easy connection. The device can be installed in any 19" housing or in the rack using the M10 slot on the rear. The light controller has clear LEDs to indicate the DMX signal status of each output and input.

€105.00*

Cameo SB 6 DUAL

Manufacturer:

€159.00*

EUROLITE DXT PoE Art-Net Node I

Manufacturer:

€155.00*

Showtec DMX-Merge 2 in 1

Manufacturer:

With the new Showtec DMX Merge, you can combine two DMX controllers into one DMX line or use a second desk as a back-up desk.The device has 3 modes:1) HTP (High Take Precendence) In this case, you can use two identical desks with the same addressing on one line. The DMX channel with the highest value has priority.2) Back-up mode. The device is connected to two DMX desks. Channel A has priority. If channel A fails or has no DMX, channel B takes over the show.3) Merge mode. Two desks can be combined for one line. For example, you can run a scene setter and DMX on one line. The scene setter controls channels 1-96, and channels 97 and higher are DMX-controlled: these positions can be freely addressed via dip switches.

€119.00*

Cameo SB8.3 - 8-channel DMX splitter / booster

Manufacturer:

The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX console or DMX devices. The input and the THRU socket for looping the signal through are duplicated on the front and rear of the CLSB83 and connected in parallel. Bright LEDs on the front panel indicate the DMX and power status of the channels, while the outputs are located on the rear panel. A 120 Ohm terminating resistor that can be switched to the DMX THRU output and the mains switch complete the equipment; the IEC cable is included in the scope of delivery. The rack brackets can be mounted on the rear of the device for easy access to all connections and 180° rotated installation. The Cameo DMX splitter and booster is also available in a 5-pole version (art. no. CLSB85).

€160.00*