Acoustic Line

Powerful and universal mid-high range system with classic 2 x 8" Nd / 1" drivers. Well suited as a powerful top unit in combination with subwoofers and as a stand-alone system for speech transmission over short and medium distances. Four M10 mounting points (optionally five when replacing the factory-fitted HS flange socket) in combination with the accessories enable simple installation in horizontal and vertical alignment.

The G Sub 1501 dp+ is a universal 15" high-performance subwoofer in a particularly flat design with two-channel amplifier electronics and DSP controller. With basic dimensions of 60 x 60 cm, it can also accommodate larger hi-mid systems in pole-mount mode without tipping over and, with a height of just 40 cm, can be easily integrated into existing stage constructions. It impresses withhandling and its deep and rich bass foundation. The integrated amplifier electronics are based on Class D power amplifiers, which are controlled via particularly low-noise FPGA DSP processing.Various factory-configured presets and volume settings can be called up. Remote monitoring and control is carried out via the Ethernet interface using SEEBURG Network Manager. Signal transmission (AoE) in accordance with the AES 67 standard is also possible.

Multifunctional 12" Nd / 1" system with particularly balanced sound reproduction. Well suited as a high-quality full-range/hi-mid speaker and as a universal monitor. The rotatable 1" DCP (=Dual Pattern Circular Horn) ensures a constant 90° x 60° dispersion over a wide frequency range. Various M8 and M10 mounting points ensure easy mounting of accessories.

The G Sub 1501 is a universal 15" high-performance subwoofer with a particularly flat design. With basic dimensions of 60 x 60 cm, it can also accommodate larger HiMid systems in pole-mount mode without tipping over and, with a height of just 40 cm, can be easily integrated into existing stage constructions. It impresses with its good handling, its deep and rich bass foundation and its modern design.

The G Sub 1501 dp++ is a universal 15" high-performance subwoofer in a flat design with three-channel DSP amplifier electronics and two signal inputs. The two integrated additional power amplifiers are used to drive two HiMid or full-range systems. With basic dimensions of 60 x 60 cm, it cancan also accommodate larger hi-mid systems in pole-mount mode. It impresses with its good handling and its deep and rich bass foundation.The integrated amplifier electronics are based on Class D power amplifiers, which are controlled via particularly low-noise FPGA DSP processing. Various factory-configured presets and volume settings can be called up. Remote monitoring and control is carried out via the Ethernet interface using SEEBURG Network Manager. Signal transmission (AoE) in accordance with the AES 67 standard is also possible.

The G Sub 1501 dp is a multifunctional top-of-the-range subwoofer with integrated digital amplifier electronics with 2400 watts of power @ 4 ohms (AES) and DSP controller. The 15" long excursion neodymium chassis is driven by the built-in amplifier. In addition, a passive G Sub 1501 can be connected to a parallel output. Various factory-configured presets and volume settings can be called up.The integrated DSP controller is based on the same principle as the external controllers HDLM 8 and DSP 2.6. The latency time of just 0.8 ms (between analogue input and output) is achieved by a sample rate of 96 kHz. Another feature that characterises the DSP controller is its very low background noise. By simulating a transformer-balanced input, the sensitivity to hum and surround noise (e.g. due to unfavourable current conditions) is also significantly minimised. High-quality electronic components from the industrial sector and a first-class circuit concept ensure high audio quality and overload resistance and effectively minimise interference noise.The built-in DSP controller is in a standard configuration state ex works, which corresponds to the specifications in the user manual. The user can upload special presets to theDSP Controller can be carried out by the user, as only a special preset audio file needs to be loaded. However, the creation of these audio files via the LPI (Loudspeaker Programming Interface) can only be carried out by the manufacturer. This means that customised settings can be programmed for installation projects, for example. If you are unsure about the DSP configuration, you can obtain the audio file with the factory presets from SEEBURG acoustic line. Highly effective and "intelligent" limiter systems ensure optimum protection against overloading without limiting the possibilities of this high-performance system.