The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres. The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
The mobile F.O.H. with external dimensions of 3x2 metres is based on special F31 trusses and covers three standard GT Stage Deck stage platforms (not included). It is delivered in a roll case. The well thought-out system enables assembly by just two people in a short space of time. The tarpaulins included in the set can be installed quickly thanks to the clever fastening system. A transparent film is incorporated into the front tarpaulin to protect the technology in all weather conditions and ensure that the stage is always visible.
The F43 truss from Global Truss can be mounted both horizontally and vertically. The main areas of application are event technology, trade fair construction, theatre technology and stage construction. The truss system is suitable for horizontal installation at low room heights and is compatible with Eurotruss FD43. The truss is available powder-coated in many different colours with a corresponding delivery time.
The F24 truss from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 4-point truss system is ideal for space-saving transport.
The F23 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F23 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
The F31(PL) truss system from Global Truss is a 1-point system and serves as a flexible aid for low loads. It can be freely combined with the other systems from the F3x series and is mostly used in exhibition stand construction. The belt tube is made of aluminium 50 (48) x 2 (3) mm. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
The F23 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F23 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
This 1-point truss from Global Truss was specially designed for applications such as railings, display construction, corner braces, screen frames for video presentations or partition walls, as well as banner frames. It can be used to easily and flexibly construct advertising presentations of all kinds.
The F22 truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. Powder coating or a "high-gloss / hand-polished" finish is possible with a corresponding delivery time. The main areas of application are exhibition stand construction, shop fitting and advertising.
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
The GT Stage Deck Outdoor platform is a mobile stage system for all outdoor and, of course, indoor applications. The areas of application are diverse: concerts, theatres, school and community halls, trade fairs, fashion events and any other event. The aluminium profile offers enormous flexibility and compatibility with many manufacturers. The external groove allows, for example, the optionally available guardrails to be attached. The "deck levellers" included in the scope of delivery can also be used to connect the platforms to each other via this groove and bring the platforms to a uniform level. The plug-in foot holders are specially designed for round and square plug-in feet and can accommodate dimensions of up to 60x60mm. The optionally available pedestal clamp ensures a firm connection between the pedestals.
The F34 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 29 cm. Due to its ideal load capacity in relation to its own weight and external dimensions, this truss is one of the most popular systems on the market. The trusses in this series are suitable for trade fair and shop construction, as well as trusses for stage roofs and other outdoor applications. This truss system is designed for a span of up to 18 metres. The F34 truss is manufactured with 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
The F14 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 10cm. The small design of the trusses is ideal for shopfitting and small constructions with low loads. Spans of up to 7 metres are possible. The F14 truss is made of 20x2 mm chord tubes and 6 mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected to each other using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
The F24 truss from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 4-point truss system is ideal for space-saving transport.
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
The F31(PL) truss system from Global Truss is a 1-point system and serves as a flexible aid for low loads. It can be freely combined with the other systems from the F3x series and is mostly used in exhibition stand construction. The belt tube is made of aluminium 50 (48) x 2 (3) mm. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
The F34 lifting beam offers optimum load-bearing capacity and is characterised by its low transport volume and lightweight construction. Powder coating or a "high-gloss / hand-polished" finish is available on request. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
