SE electronics

The new V7 PTT is a dynamic, handheld talkback microphone with supercardioid polar pattern and a Push To Talk button. It delivers the same clear, open sound with impressive feedback resistance as the V7, but now with added control: a virtually silent button that makes it the perfect talkback microphone for technicians, even in harsh, noisy environments. The Push To Talk button is easy to use and ensures that you never forget to mute your talkback microphone again. This gives you perfect control over the stage sound and in-ear mixes.

The V7 is a handheld dynamic vocal microphone with a supercardioid polar pattern and highly professional requirements.Innovative aluminium voice coil:The innovative DMC7 capsule was specially developed for vocal and speech applications. Thanks to the innovative and unique aluminium voice coil, the V7 offers a very fresh, open sound. It enables a lifelike recording of your voice and the balanced sound also makes the sound engineer's work easier. The super-cardioid polar pattern and the sophisticated acoustic design of the capsule help your voice to assert itself against other instruments on stage and enable a very high resistance to feedback.Patented, integrated suspension:The new, patented bearing effectively decouples the capsule from the housing and thus reduces handling noise, impact sound and rumble particularly effectively. This means that your voice is always in the foreground, even during energetic stage shows.Robust metal housing and roll-away protection:The housing consists only of solid metal parts - no sensitive plastic parts. The handle is made of tried-and-tested die-cast zinc-aluminium parts that can withstand even the highest loads. The durable microphone grille is made of high-quality spring steel and is resistant to deformation and corrosion. The bevelled edges along the microphone basket prevent the microphone from rolling away on flat surfaces such as the stage floor or your guitar amp.Internal windscreen:The red internal windscreen efficiently reduces unwanted wind and pop noise (e.g. from consonants, explosive sounds). If you prefer a black windscreen, we have included one for you.Gold-plated XLR contacts:The gold-plated XLR contacts ensure maximum reliability and permanently prevent any kind of corrosion.The proven neodymium magnets, the tight manufacturing tolerances and the high manufacturing quality enable outstanding sound quality, high sensitivity and high consistency.Thanks to its very balanced, neutral tuning, it allows you to mic vocals as well as a variety of other sources, such as speaker cabinets, electric guitars, brass instruments, drums and choirs - both on stage and in the studio.

The V2 SWITCH is a versatile supercardioid dynamic handheld microphone with an integrated on/off switch that takes the sound and comfort of sE's renowned V-Series dynamic microphones to a whole new entry level.Thanks to its balanced sound character, the V2 SWITCH is ideal for vocals, speech and a wide range of instruments. Due to its customised supercardioid capsule design, the V2 SWITCH isolates the voice from unwanted room reflections and background noise, ensuring high intelligibility even in difficult acoustic environments. The internal windscreen reduces unwanted wind and plosive noise, while the integrated shockmount suppresses motion noise, impact sound and any rumble, so you can deliver an impressive performance and be heard clearly.Modern design with proven neodymium magnets, tight manufacturing tolerances and high build quality ensure the V2 SWITCH delivers high sensitivity, superior sound quality and high gain before feedback to deliver the best performance on any stage and in front of any audience.With its robust all-metal construction, bevelled stainless spring steel grille and gold-plated XLR contacts, the V2 SWITCH guarantees durability, reliability and corrosion-free operation for years of demanding use.

The DM2 T.N.T is an active inline preamplifier based on the design of the sE DM1, but offering even more gain and less noise with greater flexibility. The integrated, recessed switch allows you to select a clean, transparent gain of a moderate 15 dB or an explosive 30 dB - more headroom and an extremely clean signal, with an ultra-high impedance input and eight selectable load settings to perfectly match any microphone. It is suitable for direct connection to the output of a passive ribbon or dynamic microphone, eliminating the need for an additional cable.Switchable, clean gain from a moderate 15 dB to an explosive 30 dB:Two amplifier stages provide even greater flexibility with different microphones, designed for neutral, balanced sound quality and extremely low noise. The uncompromising design amplifies the signal regardless of load impedance or cable length. The DM2 T.N.T can be perfectly combined with any passive microphone, boosts the signal, reduces the occurrence of interference and provides a significantly better level for the preamplifier of the audio interface / mixer - all without noise and colouration!Get the best out of the microphone thanks to the variable input load:Conventional inline preamps tend to load the transducers of passive microphones due to their electronic design, resulting in a degradation of sound quality and output level. The ultra-high impedance input of the DM2 T.N.T promises the best possible signal quality, regardless of the load of the microphone. The selectable impedance of the DM2 invites experimentation - it can be adjusted from an unconventionally low 50 to an astonishingly high 10 M to match the preamp to any microphone and achieve a clean recording with the lowest possible noise. The DM2 T.N.T was developed to bring out the best sound characteristics of each microphone.Sophisticated Class A electronics with additional output stage:With a sophisticated electronic design and specially selected high-quality FET transistors, the DM2 T.N.T has the lowest self-noise in its class and enables effortless studio-quality recordings. Unlike other commercially available inline preamplifiers, the DM2 T.N.T delivers a constant gain of +15 dB / +30 dB regardless of the connected load. An ideal tool for sound engineers, the DM2 T.N.T's output impedance is also the lowest in its class, making it easy to handle long cable runs while reducing susceptibility to RF interference, hum and noise.Slim, robust all-metal housing with premium finish:Even in the most demanding environments, the DM2 T.N.T scores with a stage-ready and sleek all-metal design, robust construction, high-quality manufacturing standards and a gold-plated XLR connector for reliable lossless signal connection, whether on stage or in the studio. With its exceptionally practical, phantom-powered design that requires no external power supply, the sE DM2 T.N.T is the ultimate game changer in your pro audio arsenal.

The V3 is a handheld dynamic vocal microphone with a cardioid polar pattern. It was developed for miking vocals and speech on stage. However, thanks to its well-balanced tuning, it also allows you to mic a wide range of other sources, such as speaker cabinets, electric guitars, brass instruments, drums and choirs.The cardioid polar pattern helps your voice to assert itself against other instruments on stage and enables high feedback resistance. Handling noise, impact sound and rumble are effectively suppressed by the integrated capsule bearing.Robust metal housing and roll-away protection:The housing consists only of solid metal parts - no sensitive plastic parts. The handle is made of tried-and-tested die-cast zinc-aluminium parts that can withstand even the highest loads. The durable microphone grille is made of high-quality spring steel and is resistant to deformation and corrosion. The bevelled edges along the microphone grille prevent the microphone from rolling away on flat surfaces such as the stage floor or your guitar amp.Capsule with cardioid polar pattern:The dynamic capsule ensures a high resistance to feedback and helps your voice to assert itself against other instruments on stage.Internal windscreen:The red internal windscreen efficiently reduces unwanted wind and pop noise (e.g. from consonants, explosive sounds). If you prefer a black windscreen, we have included one for you.Gold-plated XLR contacts:The gold-plated XLR contacts ensure maximum reliability and permanently prevent any kind of corrosion.Integrated bearing:The integrated bearing decouples the capsule from the housing, effectively reducing handling noise, impact sound and rumble.

The V2 SWITCH is a versatile supercardioid dynamic handheld microphone with an integrated on/off switch that takes the sound and comfort of sE's renowned V-Series dynamic microphones to a whole new entry level.Thanks to its balanced sound character, the V2 SWITCH is ideal for vocals, speech and a wide range of instruments. Due to its customised supercardioid capsule design, the V2 SWITCH isolates the voice from unwanted room reflections and background noise, ensuring high intelligibility even in difficult acoustic environments. The internal windscreen reduces unwanted wind and plosive noise, while the integrated shockmount suppresses motion noise, impact sound and any rumble, so you can deliver an impressive performance and be heard clearly.Modern design with proven neodymium magnets, tight manufacturing tolerances and high build quality ensure the V2 SWITCH delivers high sensitivity, superior sound quality and high gain before feedback to deliver the best performance on any stage and in front of any audience.With its robust all-metal construction, bevelled stainless spring steel grille and gold-plated XLR contacts, the V2 SWITCH guarantees durability, reliability and corrosion-free operation for years of demanding use.

The sE7 sideFire from sE Electronics is a premium small diaphragm condenser microphone that combines outstanding sound performance with a versatile side-address design. With a 90° capsule angle, it offers a variety of precise placement options that make capturing sound in tight spaces easier than ever before. Whether you want unobtrusive close miking, creative overhead or underhead miking or are simply looking for aesthetically pleasing microphone placement, the sE7 sideFire fulfils all these requirements and more. Based on sE Electronics' proven sE7 technology platform, it offers clear and natural sound across the entire frequency range. The ultra-thin diaphragm ensures excellent transient response. It excels in both studio and live sound applications with its ability to pick up everything from acoustic guitars and pianos to brass and percussion instruments without harshness and with rich low-end punch.The sE7 sideFire's discrete Class A electronics combined with its transformerless output provide impressively low-noise performance, making it the quietest rod microphone in its class. The switchable -20 dB pre-attenuation extends the dynamic range so that even loud sound sources such as brass instruments or snare drums can be recorded without distortion. The integrated 80 Hz low-cut filter effectively reduces low-frequency noise, impact sound and unwanted low-frequency components, making the microphone the ideal choice for close miking and general recordings.The sE7 sideFire impresses with its robust all-metal housing and high-quality workmanship, which effectively suppresses electrical interference and noise. This makes it a reliable and tour-ready companion that can confidently meet the challenges of everyday touring. The microphone is available both individually and as a matched pair combination. The hand-tuned microphone pair ensures identical performance and perfect phase correlation, resulting in exceptional stereo imaging. Each microphone is supplied with a windscreen and a sturdy microphone clip including a threaded adapter. Whether in the studio or on the road, the sE7 sideFire impresses with its versatility and delivers outstanding sound quality even in the most demanding situations. With its flexible side-address design and extensive features, the sE7 sideFire offers unrivalled flexibility, reliability and performance. This makes it the ideal choice for a wide range of applications.

The V2 SWITCH is a versatile supercardioid dynamic handheld microphone with an integrated on/off switch that takes the sound and comfort of sE's renowned V-Series dynamic microphones to a whole new entry level.Thanks to its balanced sound character, the V2 SWITCH is ideal for vocals, speech and a wide range of instruments. Due to its customised supercardioid capsule design, the V2 SWITCH isolates the voice from unwanted room reflections and background noise, ensuring high intelligibility even in difficult acoustic environments. The internal windscreen reduces unwanted wind and plosive noise, while the integrated shockmount suppresses motion noise, impact sound and any rumble, so you can deliver an impressive performance and be heard clearly.Modern design with proven neodymium magnets, tight manufacturing tolerances and high build quality ensure the V2 SWITCH delivers high sensitivity, superior sound quality and high gain before feedback to deliver the best performance on any stage and in front of any audience.With its robust all-metal construction, bevelled stainless spring steel grille and gold-plated XLR contacts, the V2 SWITCH guarantees durability, reliability and corrosion-free operation for years of demanding use.

The sE Electronics RF-X is an acoustic screen for reducing room influences during recording. Patented multi-layer technology for the best results Like its sibling products RF Pro, Project Studio Reflexion Filter and IRF2, the RF-X also features the effective multi-layer technology patented by sE (Patent No. US 8,191,678). In the case of the RF-X, a total of four layers are used. The RF-X - lightweight with great effect Compared to the previously available sE Reflexion filters, the RF-X weighs considerably less and can therefore be mounted on almost any microphone stand. With the RF-X, sE Electronics once again impressively proves that it is possible to significantly reduce the room influence on the recording without noticeably affecting the sound. Together with the sE X1 large diaphragm microphone and the matching spider with pop shield and microphone cable, it is part of the sE Studio Bundle.

Tough as a tank and ready for the stage - the secret weapon for a variety of applications such as kick drums and other high sound pressure level sources.The BL8 is a semi-cardioid boundary microphone that uses the same capsule as the famous sE8 small diaphragm condenser microphone. Its handcrafted condenser capsule uses an ultra-thin, three micron, gold-plated diaphragm for excellent transient response. Designed to reproduce low frequencies with amazing accuracy, the BL8 is perfect for pairing with the V Kick, but can also be used on its own without an additional kick drum mic. It is also compatible with the Kelly Shu Flatz Isolation System, making it ideal for touring applications.The BL8 utilises a Class A transformerless circuit that provides ample headroom without distortion and low-noise electronics for transparency and clarity. The integrated low-cut filter and optional EQ shaping switch make it a very versatile microphone that is ideal for ambient recordings and detailed room miking and can even be used for miking pianos. Thanks to the switchable attenuator, the BL8 prevents sources with high sound pressure levels from overloading the input of your mixing console.The BL8 is robustly built with an all-metal construction, deformation-resistant grille and gold-plated XLR contacts to ensure long-term reliability.Equipped with the familiar 1/2" cardioid sE8 condenser capsule:The BL8 uses the same capsule as the famous sE8 small diaphragm condenser microphone and features a handmade condenser capsule with an ultra-thin, gold-plated 3-micron diaphragm for excellent transient response.Tough as a tank and ready for the road:The BL8 is built tough with an all-metal construction and deformation-resistant grille - perfect for touring and busy stages. The BL8 is also compatible with the Kelly Shu Flatz Isolation System and can be easily integrated into any kick drum.Damping pad and low-cut filter:The integrated low-cut filter and attenuation pad make the BL8 a very versatile microphone that is ideal for ambient recording and room miking and can even be used on pianos, while preventing high sound pressure sources from overloading the mixer input.Classic and modern voicings for live and studio recordings:The ideal studio kick drum sound often differs from our preferences in a live sound environment. Similar to the award-winning V Kick kick drum microphone, the BL8 offers "Classic" and "Modern" voicings. These options cut and model the low mids to emphasise transients and punch. In the centre position, the neutral frequency response of the capsule is maintained, which is ideal for a variety of other applications.Incredible dynamic range in all areas:The BL8 is equipped with a Class A transformerless circuit that provides ample headroom without distortion. Its extremely low-noise electronics enable demanding applications such as miking grand pianos or rooms, while the BL8 also reproduces low frequencies with astonishing accuracy. The BL8 is perfect in combination with the V Kick, but can also be used on its own without an additional kick drum microphone.Gold-plated XLR connector:The BL8 is equipped with a gold-plated XLR connector, which guarantees a loss-free, reliable signal connection for many years.

A DI in a class of its own:The sE DM3 is an active inline DI with Ultra-HiZ input and an impressively compact design - engineered to always get the best out of instruments! Based on the proven DYNAMITE technology also used in the DM1 and DM2, the DM3 reinvents the active inline DI with a phenomenally low-noise design. Its Ultra-HiZ input and dedicated Class A output amplifier preserve the individual sonic character of the instrument with pristine detail. It is ideal for sources such as vintage electric guitar/bass pickups, piezo-equipped acoustic instruments and high-output sources such as keyboards, synthesisers, drum machines and laptops, to name but a few.Thanks to its enormous headroom and switchable attenuator, the DM3 can handle the roaring power of a 10,000-watt solid-state amplifier. Its three-position ground lift switch has a unique "on+" setting that effectively reduces not only hum but also unwanted bleed. With a lockable 1/4" input jack, the DM3 provides a secure connection in the most demanding, hectic live or recording environments. With its rugged all-metal housing and space-saving inline form factor, the DM3 is not a box, but rather a compact, round all-rounder (pun intended). It's the key to great sound!Ultra-HiZ input to get the best out of the instrument:The DM3 has an astonishingly high input impedance of 10 megaohms, so that the individual sound character of an instrument is preserved - with virtually no load. The proven ultra-low noise technology from the inline preamps of the Dynamite series ensures maximum signal quality even with pickups with low output power.Massive headroom for even the loudest instruments:The DM3 is designed to handle the highest output levels of even the hottest active pickups, keyboards, drum machines, synthesisers and laptops, to name but a few sources. The DM3 can easily handle the roaring power of a 10,000 watt amplifier (285 Vrms or 805 Vp-p)! If the signal is too hot, the built-in recessed attenuation switch can attenuate the input signal by 15 or 30 dB to match any input load.A new standard for the ground lift switch:The DM3's recessed three-stage ground lift switch not only reduces unwanted hum, but also noise and high-frequency interference. The perfect setting for the cleanest possible signal can be easily selected, whether in the studio, when recording at home, on stage at a concert or in a church service.Lockable 1/4" input socket:The show must go on - and with a lockable 1/4" socket, this is guaranteed! The DM3's lockable switch is ideal for any environment and ensures that the signal is protected from accidental unplugging. However, the locking mechanism can also be deactivated if desired.Dedicated Class A output buffer amplifier and high-quality workmanship:State-of-the-art electronics ensure the lowest noise in its class, and the proven Class A design prevents distortion from being added to the signal through the zero crossing. The DM3 buffers the signal regardless of load impedance or cable length, ensuring a powerful, clean and consistent signal every time. And it comes with an elegant finish that will last for years.Slim, discreet all-metal housing and gold XLR connectors:The DM3's all-metal design, high-quality manufacturing standards, robust construction and gold-plated XLR connectors ensure a road-ready design and a reliable, loss-free signal in an exceptionally compact form factor. The DM3 can be connected directly to interfaces, mixing consoles, stage boxes or any standard XLR input without the need for an additional cable. It's compact enough to fit in a pocket or hang from the included sE 1/4" plug keychain, so you can take great sound with you wherever you go.