SE electronics

The DM1 DYNAMITE is an active inline preamplifier that is connected between a passive ribbon or dynamic microphone and a microphone preamplifier. The DM1 offers a gain of +28dB, making it the perfect solution for amplifying the signal of a passive microphone, reducing the occurrence of interference and significantly increasing the preamplification - without adding noise or colouration With a sophisticated Class A design and specially selected high-quality FET transistors, the DM1 has the lowest self-noise in its class. In addition, the dedicated output isolation amplifier offers a constant gain of 28 dB, regardless of the connected load. Its output impedance is also the lowest in its class, allowing it to run long cable runs while reducing susceptibility to RF interference, hum and noise.The roadworthy and slim all-metal design, robust construction and high manufacturing standards ensure reliable operation even in demanding applications on stage in difficult environments.

guitaRF - Reflection filter and stand:The guitaRF not only functions as a reflection filter, but also comes with an integrated, stable stand and can hold two microphones simultaneously - for example, a condenser or ribbon microphone and a dynamic or small diaphragm microphone at the same time.The hardware - stable and versatile:The holder for the large diaphragm or ribbon microphone can be moved around three axes (vertically, in depth and horizontally), making it easy to find the perfect position for the microphone. Regardless of whether it is mounted in a spider or a clamp.The filter can also be moved up and down as a whole, removed from its base plate and attached to any standard microphone stand.The filter - effective and absorbent:With its four acoustic layers, the small guitaRF achieves the same acoustic effectiveness as its big brother, the RF-X. It is equipped with an opening in which it can accommodate a typical dynamic or small diaphragm microphone - for twice the microphone pleasure.guitaRF - More than just guitar and bass:The guitaRF not only works wonderfully with guitar or bass amp cabinets, but is also ideal for use in front of a kick drum, a keyboard amp, in front of acoustic guitars or as an isolator between snare and hi-hat - both in the studio and on stage.

The new sE8 is a high-quality small diaphragm microphone with outstanding sound characteristics. The elaborately manufactured electrode enables a very balanced and particularly natural transmission of instruments of all kinds. This also allows the intensive use of EQs or filters without making the recording unpleasant. With the highest dynamic range and the highest overload resistance in its class as well as the practical, switchable attenuation and high-pass filters, the sE8 offers unbeatable flexibility for every application in the studio and on stage.

The DM2 T.N.T is an active inline preamplifier based on the design of the sE DM1, but offering even more gain and less noise with greater flexibility. The integrated, recessed switch allows you to select a clean, transparent gain of a moderate 15 dB or an explosive 30 dB - more headroom and an extremely clean signal, with an ultra-high impedance input and eight selectable load settings to perfectly match any microphone. It is suitable for direct connection to the output of a passive ribbon or dynamic microphone, eliminating the need for an additional cable.Switchable, clean gain from a moderate 15 dB to an explosive 30 dB:Two amplifier stages provide even greater flexibility with different microphones, designed for neutral, balanced sound quality and extremely low noise. The uncompromising design amplifies the signal regardless of load impedance or cable length. The DM2 T.N.T can be perfectly combined with any passive microphone, boosts the signal, reduces the occurrence of interference and provides a significantly better level for the preamplifier of the audio interface / mixer - all without noise and colouration!Get the best out of the microphone thanks to the variable input load:Conventional inline preamps tend to load the transducers of passive microphones due to their electronic design, resulting in a degradation of sound quality and output level. The ultra-high impedance input of the DM2 T.N.T promises the best possible signal quality, regardless of the load of the microphone. The selectable impedance of the DM2 invites experimentation - it can be adjusted from an unconventionally low 50 to an astonishingly high 10 M to match the preamp to any microphone and achieve a clean recording with the lowest possible noise. The DM2 T.N.T was developed to bring out the best sound characteristics of each microphone.Sophisticated Class A electronics with additional output stage:With a sophisticated electronic design and specially selected high-quality FET transistors, the DM2 T.N.T has the lowest self-noise in its class and enables effortless studio-quality recordings. Unlike other commercially available inline preamplifiers, the DM2 T.N.T delivers a constant gain of +15 dB / +30 dB regardless of the connected load. An ideal tool for sound engineers, the DM2 T.N.T's output impedance is also the lowest in its class, allowing it to handle long cable runs with ease while reducing susceptibility to RF interference, hum and noise.Slim, robust all-metal housing with premium finish:Even in the most demanding environments, the DM2 T.N.T scores with a stage-ready and sleek all-metal design, robust construction, high-quality manufacturing standards and a gold-plated XLR connector for reliable lossless signal connection, whether on stage or in the studio. With its exceptionally practical, phantom-powered design that requires no external power supply, the sE DM2 T.N.T is the ultimate game changer in your pro audio arsenal.

The sE Electronics Relfexion Filter PRO is a portable solution for reducing the amount of room ambience during recording. The multi-layered screen can be mounted behind any microphone thanks to its variable mount, enabling 'dry' vocal or instrument recordings with a significantly reduced amount of ambient sound.This is particularly useful in studios without special acoustic treatment. It also enables recording in the control room (e.g. when the artist has to operate the recording equipment at the same time) or reduces ambient noise in practice rooms.

The sE4400 is a real all-rounder and the revised version of the popular sE4400a. The dual diaphragm enables a wide range of directional characteristics and makes the microphone a versatile choice for use in the studio and on stage.The sE4400 offers four different polar patterns - omnidirectional, cardioid, hypercardioid and figure-of-eight - a LoCut with two selectable operating frequencies (40Hz and 80Hz) and a two-stage switchable pad (10dB / 20dB). Despite its small dimensions, the housing accommodates a 1" double diaphragm as well as high-quality electronics and switches.With a thickness of less than 3/4" (approx. 1.9cm), the sE4400 is extremely thin and fits comfortably in the palm of your hand. The flat, rounded housing design allows the microphone to be mounted close to the guitar cabinet or flat over the drum head. It is also perfect for vocals or voice over.Handcrafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches and a robust basket made of spring steel wire that can take a beating on the road: The sE4400 impresses with its down-to-earth elegance and offers discreet electronics that emphasise the functions that are really needed.The accessories include the new SH21 elastic suspension, which also allows installation in confined spaces. A steel-reinforced, black aluminium transport case is also included.Also available as sE4400 stereo set.

The DM1 DYNAMITE is an active inline preamplifier that is connected between a passive ribbon or dynamic microphone and a microphone preamplifier. The DM1 offers a gain of +28dB, making it the perfect solution for amplifying the signal of a passive microphone, reducing the occurrence of interference and significantly increasing the preamplification - without adding noise or colouration With a sophisticated Class A design and specially selected high-quality FET transistors, the DM1 has the lowest self-noise in its class. In addition, the dedicated output isolation amplifier offers a constant gain of 28 dB, regardless of the connected load. Its output impedance is also the lowest in its class, allowing it to run long cable runs while reducing susceptibility to RF interference, hum and noise.The roadworthy and slim all-metal design, robust construction and high manufacturing standards ensure reliable operation even in demanding applications on stage in difficult environments.

sE X1 S - reissued and greatly improved:The X1 S is the reissued version of the sE classic X1, retuned and improved in every way. With the handmade and individually tuned 1-capsule as well as the highest dynamic range and highest maximum sound pressure level in its class, the X1 S offers the sound and features you would expect from a hi-end studio mic, but at a fraction of the price.Handmade 1 condenser capsule:Just like its predecessor X1, the X1 S is equipped with a handmade condenser capsule, which is manufactured and tuned with extreme precision by technicians in sE's capsule room. The technicians are carefully trained over a period of 18 months by sE's master capsule maker - who has around 30 years of experience in capsule construction - and are only allowed to actively participate in capsule production after this training phase. In addition, the technicians are only allowed to build capsules for sE. This results in capsules that are manufactured in the same way as the finest musical instruments in the world, and that can also master the challenge of recording these instruments as realistically as possible.Ultra-quiet electronics:The sE X1 already boasted very low self-noise. The newly developed electronics take the performance of the X1 S to a new level and make the microphone one of the quietest in its class with 9dB(A) self-noise. In addition, the new electronics also improve the sensitivity and the maximum sound pressure level that the microphone can handle.Two switchable attenuation levels:The two -10dB and -20dB switches extend the dynamic range of the microphone and open up a wide range of possibilities, especially for close mic miking - even for the loudest instruments such as super-heavy guitars, loud brass instruments or hard kick drums.Two switchable LoCut filters:The two selectable LoCut filters (80Hz and 160Hz) help to limit low-frequency rumble, impact sound or heavy bass.Metal housing and premium paint finish:In contrast to the cheaply constructed housings of other microphones, the solid metal housing of the X1 S prevents electrical influences and noise. The high-quality paint finish also ensures that the X1 S will look great for many years to come.Gold-plated XLR contacts:The gold-plated XLR contacts provide the X1 S with a loss-free and reliable signal connection for years and years and yearsScope of delivery:sE X1 S microphone, microphone holder, reduction thread, sE logo sticker, operating instructions with warranty card (English, German, Italian, French, Spanish, Chinese)

The X1 A studio condenser microphone sets standards within its price class. It not only offers first-class sound quality and a high dynamic range, but also impresses with its high-quality workmanship and very attractive design. The balanced sound and the switchable filters enable a wide range of applications both in the studio and on stage.The X1 A is a high-quality condenser microphone that is suitable for a wide range of studio applications - from vocals to acoustic instruments and drums. Thanks to the carefully selected capsule and high-quality electronics, it offers unadulterated sound quality and a straightforward, very balanced frequency response.The electronic circuit, built with high-quality, discrete components, and the switchable pre-attenuation filter result in a high dynamic range, guarantee the clean processing of very high sound pressure levels and offer low self-noise. The switchable high-pass filter suppresses low-frequency noise (e.g. footfall, rumble or wind noise) and compensates for the bass boost that occurs at close microphone distances due to the proximity effect. This enables the near-field miking of many instruments such as electric guitars, brass instruments and drums. High reliability, even in demanding stage applications, is guaranteed by the robust metal construction and high production standards.The completely new acoustic design, the hand-selected condenser capsule and the low-noise electronics guarantee the best possible sound quality in its class. Gold-plated contacts, a high-quality, robust metal housing, switchable attenuation and bass filters, a completely redesigned stand adapter and an integrated windscreen round off the new X1 A.

The Harp Blaster HB52 dynamic harmonica microphone is the result of a co-operation between HOHNER and sE Electronics. It was developed with the inspiring support of professional harmonica players and sets new standards for the sound of legendary vintage harmonica microphones.Perfect for the artist's creative output, it can be held very comfortably for long periods of time and is suitable for cupping to create the typical Bues harp sound. It blends seamlessly with the artist's emotional output to maximise sound quality and musical expression.The uncompromising design is tailored to the needs of touring professionals. The HB52 combines fantastic sound quality with optimum ease of use and maximum durability.Compact dimensions. Big sound. Easy handling:The HB52 is the perfect size for cupping and easy handling. It blends seamlessly with the artist's emotional output to maximise sound quality and musical expression.Vintage sound paired with modern precision:Inspired by the sound of legendary vintage harmonica microphones and developed in close collaboration with professional players to fulfil the essential requirements. Manufactured to state-of-the-art standards with high-quality components and robust metal parts for maximum durability.Boutique features meet state-of-the-art manufacturing:Handcrafted with great attention to detail in our in-house factory. The hammer finish not only looks incredibly good, it also promises maximum durability and the lustre of the polished, chrome-plated grille will last for years. The Bourns® potentiometer allows the volume to be precisely adjusted (can be deactivated if required) and the gold-plated XLR contacts ensure reliable, loss-free signal transmission.At the heart of the Harp Blaster: the capsule:The capsule combines sE's many years of experience in dynamic capsule design and acoustics with HOHNER's accumulated harmonica expertise of over 160 years. The sensitive capsule responds immediately to hand position and musical expression. Thanks to the high output level and high output impedance, amps can be driven directly without additional impedance converters or intermediate catch-up amplifiers. Proven neodymium magnets, tight manufacturing tolerances and the finest workmanship ensure outstanding sensitivity and first-class sound quality. In contrast to ceramic or piezo transducers, the dynamic capsule is insensitive to impacts on hard surfaces. It withstands harsh environmental conditions and retains its sound quality for years.Full metal housing - no sensitive plastic parts:The highly resistant die-cast zinc alloy is designed for years of stage use. The corrosion-free and deformation-proof material, together with the finishing, promises absolute reliability. The all-metal housing is manufactured to the highest standards and has no plastic parts. The microphone is extremely robust. You can drop it, kick it and/or hammer nails into it.

SPACE catapults the Reflexion Filter into another dimension!Excursus Reflexion Filter:The Reflection Filter is a portable solution for reducing the amount of room ambience during recording. The multi-layered screen can be attached behind any microphone thanks to its variable mount, thus enabling 'dry' vocal or instrument recordings with a significantly reduced room component.This is particularly useful in studios without special acoustic treatment. It also enables recording in the control room (e.g. when the artist has to operate the recording equipment at the same time) or reduces ambient noise in practice rooms.

The sE2300 is the multi-pattern version of the multi-award-winning 2200 condenser microphone, which sE Electronics made famous many years ago in particular for providing the user with an outstanding sound - especially for the price range - that is very well suited for a variety of applications such as vocal recordings, voice-overs and instrument recordings. The cardioid version became famous when world-class artists such as Amy Winehouse used it in the studio. And this multi-pattern version further improves the versatility and usability for any recording situation.sE has given the sE2300 numerous features that made its predecessor models the microphone that a whole generation of studio engineers love so much. The sE2300 is equipped with the same capsule, the same custom transducers and the discrete Class A circuitry that were used in the previous models. The state-of-the-art components, paired with a shorter, further optimised signal path, enable an enormously low self-noise of just 8dB(A).This not only makes the sE2300 one of the quietest microphones on the market in terms of noise behaviour, it is also - especially together with the new polar pattern, pad and filter options - one of the most versatile studio tools on the market that can show off its full class in any recording situation. Whether recording vocals or speech, drums, electric guitar or acoustic instruments, the sE2300 always knows how to impress.Just like the finest musical instruments in the world, the capsule of the sE2300 is manufactured and tuned by hand in the company's own factory in Shanghai. Unlike many competitor backplate and electret capsules, the capsule of the sE2300 is a true condenser capsule that offers the best possible performance in every respect.The microphone's new electronics and the two switchable attenuation filters enable a high dynamic range and can handle high sound pressure levels. The two switchable LoCut filters prevent impact noise and reduce the increase in bass due to the proximity effect. This means that even the loudest instruments such as electric guitar amplifiers, drums and wind instruments can be easily picked up using a close mic. Thanks to the switchable directional characteristics, the room components on the recording can be varied according to taste.The housing, which is made of robust, roadworthy metal, and sE's high manufacturing standards make the sE2300 a reliable workhorse - even in difficult environments and situations.The sE2300 is supplied together with the Isolation Pack (incl. elastic suspension, integrated pop protection and reduction thread).

Scope of delivery:X1 S microphoneIsolation Pack (elasticated holder including pop protection)3m XLR microphone cablesE X1 S - reissued and greatly improved:The X1 S is the new version of the sE classic X1, retuned and improved in every respect. With the hand-crafted and individually tuned 1-capsule as well as the highest dynamic range and highest maximum sound pressure level in its class, the X1 S offers the sound and features you would expect from a hi-end studio mic, but at a fraction of the price.Handmade 1 condenser capsule:Just like its predecessor X1, the X1 S is equipped with a handmade condenser capsule, which is manufactured and tuned with extreme precision by technicians in sE's capsule room. The technicians are carefully trained over a period of 18 months by sE's master capsule maker - who has around 30 years of experience in capsule construction - and are only allowed to actively participate in capsule production after this training phase. In addition, the technicians are only allowed to build capsules for sE. This results in capsules that are manufactured in the same way as the finest musical instruments in the world, and that can also master the challenge of recording these instruments as realistically as possible.Ultra-quiet electronics:The sE X1 already boasted very low self-noise. The newly developed electronics take the performance of the X1 S to a new level and make the microphone one of the quietest in its class with 9dB(A) self-noise. In addition, the new electronics also improve the sensitivity and the maximum sound pressure level that the microphone can handle.Two switchable attenuation levels:The two -10dB and -20dB switches extend the dynamic range of the microphone and open up a wide range of possibilities, especially for close mic miking - even for the loudest instruments such as super-heavy guitars, loud brass instruments or hard kick drums.Two switchable LoCut filters:The two selectable LoCut filters (80Hz and 160Hz) help to limit low-frequency rumble, impact sound or heavy bass.Metal housing and premium paint finish:In contrast to the cheaply constructed housings of other microphones, the solid metal housing of the X1 S prevents electrical influences and noise. The high-quality paint finish also ensures that the X1 S will look great for many years to come.Gold-plated XLR contacts:The gold-plated XLR contacts provide the X1 S with a loss-free and reliable signal connection for years and years and yearsScope of delivery:sE X1 S microphone, microphone holder, reduction thread, sE logo sticker, operating instructions with warranty card (English, German, Italian, French, Spanish, Chinese)

The active microphone for active speakers, singers and musicians!The newest member of the DynaCaster family of dynamic studio microphones, the DCM6 is an active, front-address, cardioid dynamic microphone! From recording your next song to building a community on your favourite platform, the DCM6 is designed to make your time creating easier with a built-in clean and transparent gain of +30 dB at the touch of a button. With its integrated DYNAMITE preamp, the DCM6 is much louder than a typical dynamic microphone, eliminating the need for an inline preamp while lowering the noise floor. The specially developed cardioid capsule has a specially tuned frequency response for a pleasant and natural vocal sound and the best possible sound separation. The DCM6 has an integrated pop filter, a shockmount and a swivelling microphone holder for tripod mounting and therefore offers the right basic equipment for professional use. The DCM6's all-metal body, integrated features and sleek, modern finish eliminate the need for a bulky external shockmout or pop filter and allow for an unrestricted camera angle whether you're recording in the studio, at a radio or TV station or at home. The DynaCaster DCM6: Robust, dynamic, loud - be heard...but better!Dynamic microphone with cardioid polar pattern and front addressing - customised for speechThe DynaCaster DCM6 with front-addressed cardioid polar pattern provides a natural and intimate sound for vocals and speech. The specially developed capsule technology isolates the voice from unwanted ambient noise, ensuring high intelligibility even in noisy environments.Turbo boost with +30 dB clean gainWhen phantom power (48V) is applied, the DCM6's integrated DYNAMITE preamplifier instantly delivers +30 dB of clean and transparent gain at the touch of a button. This not only makes the DCM6 louder than a typical dynamic microphone, but also eliminates the need for an inline preamplifier and reduces the noise floor for virtually noise-free recordings.Get started straight away thanks to the integrated pop filter, shockmount and tripod mountThe integrated pop filter, the patented shockmount from SE and the swivelling tripod mount ensure that you are ready to go right out of the box.Modern. Professional. Elegant.The DCM6's all-metal body, built-in features and sleek, modern finish eliminate the need for a bulky external shockmount or pop filter, allowing for unobstructed camera settings whether you're shooting in the studio, at a broadcast station or at home.Shockproof full metal housing with high-quality finishThe DCM6 has a robust, rock-solid housing and a corrosion-free premium finish that is designed to withstand years of demanding use.

Scope of delivery:X1 S microphoneReflexion Filter RF-XIsolation Pack (elasticated holder including pop protection)3m XLR microphone cablesE X1 S - reissued and greatly improved:The X1 S is the new version of the sE classic X1, retuned and improved in every respect. With the handmade and individually tuned 1-capsule as well as the highest dynamic range and highest maximum sound pressure level in its class, the X1 S offers the sound and features you would expect from a high-end studio mic, but at a fraction of the price.Handmade 1" condenser capsule:Just like its predecessor X1, the X1 S is equipped with a handmade condenser capsule that is manufactured and tuned with extreme precision by technicians in sE's capsule room. The technicians are carefully trained over a period of 18 months by sE's master capsule maker - who has around 30 years of experience in capsule construction - and are only allowed to actively participate in capsule production after this training phase. In addition, the technicians are only allowed to build capsules for sE. This results in capsules that are manufactured in the same way as the finest musical instruments in the world, and that can also master the challenge of recording these instruments as realistically as possible.Ultra-quiet electronics:The sE X1 already boasted very low self-noise. The newly developed electronics take the performance of the X1 S to a new level and make the microphone one of the quietest in its class with 9dB(A) self-noise. In addition, the new electronics also improve the sensitivity and the maximum sound pressure level that the microphone can handle.Two switchable attenuation levels:The two -10dB and -20dB switches extend the dynamic range of the microphone and open up a wide range of possibilities, especially for close mic miking - even for the loudest instruments such as super-heavy guitars, loud brass instruments or hard kick drums.Two switchable LoCut filters:The two selectable LoCut filters (80Hz and 160Hz) help to limit low-frequency rumble, impact sound or heavy bass.Metal housing and premium paint finish:In contrast to the cheaply constructed housings of other microphones, the solid metal housing of the X1 S prevents electrical influences and noise. The high-quality paint finish also ensures that the X1 S will look great for many years to come.Gold-plated XLR contacts:The gold-plated XLR contacts provide the X1 S with a loss-free and reliable signal connection for years and years and years

The new sE8 is a high-quality small diaphragm microphone with outstanding sound characteristics. The elaborately manufactured electrode enables a very balanced and particularly natural transmission of instruments of all kinds. This also allows the intensive use of EQs or filters without making the recording unpleasant. With the highest dynamic range and the highest overload resistance in its class as well as the practical, switchable attenuation and high-pass filters, the sE8 offers unbeatable flexibility for every application in the studio and on stage.Handmade small diaphragm capsule:Each capsule is handcrafted and customised in the sE factory with great attention to detail. The wafer-thin, gold-vapour-plated diaphragm offers impressive transient reproduction and captures even the smallest details. The precision-crafted electrode has been optimised for maximum linearity and natural reproduction, resulting in a very smooth, balanced frequency response.Precise, direction-independent polar pattern:Thanks to the sophisticated acoustic design with precision parts, the directional characteristic is largely independent of direction. This prevents sound colouration, especially in demanding recordings.The lowest-noise small diaphragm microphone in its class:The extremely short signal path, the discrete components and the optimised Class A circuitry make the sE8 one of the lowest-noise microphones on the market - and by far the quietest microphone in its class. The outstanding transparency, the enormous dynamic range and the very low distortion are due to an innovative circuit concept with a transformerless output stage.Attenuation filter with two stages:High flexibility and an extended dynamic range are achieved by the attenuation filter. The two stages prevent clipping of the electronics and the connected microphone preamp or audio interface right at the start of the signal chain. This means that even very loud instruments such as brass instruments and snares can be miked without any problems, even in the near field.Two-stage high-pass filter:The integrated high-pass filter can be switched between 80Hz and 160Hz to attenuate unwanted rumble and footstep noises as well as the bass boost caused by near-field miking (proximity effect).Robust metal housing and high-quality surfaces:The sophisticated design is particularly durable and effectively shields the electronics from electromagnetic interference.Gold-plated XLR plug:The corrosion-free contacts enable loss-free and reliable transmission for many years.Accessories supplied:The sE8 is supplied with a windscreen, a tripod adapter and a threaded adapter.