Cables & Plugs

K-SPIDER is an active multi-format plug input to HDMI plug output adapter that allows you to connect an HDMI, DisplayPort, Mini DisplayPort or USB Type-C source to an HDMI acceptor.

Many enthusiastic customers of the super-robust guitar and instrument cable SC-Spirit XXL have requested a slightly more compact version of this legendary design, which also fits into connectors with a smaller cable inlet, such as angled jacks for ground effect units or RCA/RCA connectors. However, the SC-SPIRIT XS is not a slimmed-down version of the SPIRIT XXL cable, but a cable adapted to the conditions with a reduced outer diameter of 5.8 mm. The large wire cross-section of 0.75 mm² and the gas-foamed insulation enable a low capacitance of 76 pF.

DINIC Premium HDMI cable from our Dubai Range for the highest demands on quality, look and feel.It has an additional HDMI Ethernet channel (HEC) for a network connection and transmits Full HD 3D and Deep Colour up to 1080p at a frequency of 340 MHz. Resolutions of up to 4K2K are possible.

If data has to go back and forth, then a digital cable with a feedback channel should be used. The characteristic impedance of this cable is also specifiedat 110 Ω. Of the 4 cores, 2 areresponsible for the feedback function. The robust outer sheath is suitable for outdoor installation and fixed installation.

It's time for a change! For decades, little has changed in the basic concept of instrument cables: A copper core on the inside, a PVC sheath on the outside. This recipe for success has long guaranteed robust and flexible cables.However, what is not taken into account is that PVC cannot be easily recycled due to certain additives! As a novelty, Cordial has opted for a completely new jacket material that completely dispenses with PVC! Sustainable and, above all, at least as high quality as anything that has gone before.The alternative to PVC is called TPE-V. This is a mixture of soft/elastic components, which ensure flexibility, softness and good winding properties - as well as harder components, which enable both notch resistance and use at high operating temperatures.

The Ethercon QUAD DMX-AES/EBU adapter utilises one pair of wires of a common 4-pair CAT cable and thus enables the cost-efficient transport of four parallel DMX or AES/EBU signals.It is fitted with black Male NEUTRIK® XLR metal connectors in 3-pin design. The individual cables are TIA 568 A colour-coded and terminate after a 70 cm split in a special metal cable socket with strain relief and kink protection based on the well-known NEUTRIK® NE8FF.We recommend network cables with at least one overall shield for the long distances in between. Distances of up to 150 metres are possible when using the high-quality CORDIAL CCAT 7A LONG RUN with a wire gauge of AWG 23.An ingenious solution for rental companies and event technology service providers in the "audio and video over IP" sector to extend the utilisation possibilities of high-quality network cable reels.

The DPS-2 is an exceptional linear power supply unit which, in addition to its outstanding technical data, impresses with itsFeatures and practical functions. For example, the compact device hastwo outputs, each with different filtering. The housing design and front panel of the DPS-2is based on the ADI-2 series and accommodates RME's innovative circuit design in only half the rack width.The Linear output is a classic DC output, but is equipped with multi-stage passive and active filters, including a 30,000 kHz filterincluding a 30,000 F capacitor bank, a ferrite choke and an active output filter with hybrid voltage regulatorHybrid voltage regulator.The second output is based on the filter technology developed by RME. For this purpose, the signal from thepre-filtered linear output is additionally processed with highly efficient active filters to produce an exceptionally cleanDC output signal with only a few micro-volts of interference. In addition, the output featuresSensor technology that measures and regulates the output voltage directly at the DC plug of the special DC cable suppliedregulated. The result is an extremely low output impedance and load regulation, which ensures a clean output voltage ofOutput voltage of +12.0 V at 2.5 A and almost completely eliminates load-dependent voltage drops.Thanks to the additional use of a two-stage HF mains filter and a DC mains filter on the AC side, theDPS-2 enables optimum performance without interference noise. The 60 VA audio toroidal transformer also contributes to this with itsadditional insulation winding and the magnetic shielding tape guarantees absolutely hum- and noise-free operation in any situationin any situation.The ground lift switch can be used to disconnect the earth of the DC output from the earthing contact if required, for example to eliminate ground loops. This does not affect safety, as the earthing contact of the mains cable is still firmly connected to the housing and the earthing terminal. In addition, the DPS-2 has an earthing screw (GND screw terminal) to earth other devices or to use an earthing other than Schuko for the audio power supply. For a quick overview of the most important operating statuses and faults (existing input and output voltage, overload, undervoltage, short circuit), the DPS-2 has a short-circuit indicator,Short circuit), the DPS-2 has two multi-coloured front LEDs. An AutoDark mode can be activated via a recessed push switch on the front of the device, in whichmode, in which the LEDs only light up when the DPS-2 is switched on and when errors occur.

The SCDP-FX* seal ensures dust and waterproof installation of D-shaped chassis connectors on front panels.