Advantage of short adapter cables:If first an adapter and then another cable are fitted in series in an output socket, theCable in series, the distance between the adapter and the cable connectorcreates a large leverage effect on the socket. This is cancelled out by the shortAdapter cables, as only a single plug is fitted. TheSockets are protected.
Advantage of short adapter cables:If first an adapter and then another cable are fitted in series in an output socket, theCable in series, the distance between the adapter and the cable connectorcreates a large leverage effect on the socket. This is cancelled out by the shortAdapter cables, as only a single plug is fitted. TheSockets are protected.
Blue anodised aluminium housing with various mounting options for cable ties, steel cable, Velcro tape or screw mounting.Additional M10 threaded sleeve on the underside for mini TV spigot or direct mounting on existing components.Very handy stage box for universal use. Perfect not only on stages or trusses, but also as a small problem solver in the toolbox.
Colour codes derived from "RGBW".("Blue" became "Black" for better contrast in difficult lighting conditions):Ch.1 : R: redCh.2 : G: greenCh.3 : B: blackCh.4 : W: whiteVersion with 3-pin ConvertCon as a universal snake in the console for in/output, also mixed.DJ version especially suitable for mixers with two XLRs and two 6.3 mm jacks for master and booth-out available.The "LA" version with staggered outputs is also available for applications with active linear arrays.
The Catapult Mini RX is designed to act like the transmit end of a typical analogue 4-channel audio snake, allowing you to send microphone or line level signals from one location to another without experiencing signal loss, noise or interference and without the need for digital audio conversion. It is the component made to receive the signals from a transmitting component such as the Catapult Mini TX (sold separately). Instead of using a multi-channel analogue audio cable, which can be bulky and expensive, the Catapult system allows you to use a widely available, lightweight and economical Cat 5 Ethernet cable. Simply connect a shielded Cat 5 cable between 2 matched Catapult modules and they use the cable's analogue conductors to deliver 4 balanced audio lines to each destination. As many buildings are already pre-wired with Cat 5, you can use this to transmit audio between remote rooms without the need to install or supply new cable. And because the Catapult system is modular, you can mix and match different transmitter and receiver boxes to best suit your situation.Leave the normally bulky and expensive audio snakes behind and send your signals via Cat 5 or Cat 6 cable with the Catapult Mini RX instead!
The Catapult Mini TX from Radial Engineering acts as a 4-channel audio snake. It allows you to send microphone or line level signals from one location to another without signal loss, noise or interference and without the need for digital audio conversion. The Catapult Mini TX has four XLR connectors on cable ends and an RJ45 output that sends analogue audio over Cat 5/6 Ethernet cable. The housing is made of 16-gauge steel for any environment and is powder-coated.
Colour codes derived from "RGBW".("Blue" became "Black" for better contrast in difficult lighting conditions):Ch.1 : R: redCh.2 : G: greenCh.3 : B: blackCh.4 : W: whiteVersion with 3-pin ConvertCon as a universal snake in the console for in/output, also mixed.DJ version especially suitable for mixers with two XLRs and two 6.3 mm jacks for master and booth-out available.The "LA" version with staggered outputs is also available for applications with active linear arrays.
Neutrik adapters are versatile, pre-wired and ready for immediate use to reliably connect different connector systems. The professional appearance and compact design of the robust die-cast housings or aluminium profile housings ensure absolute reliability.
Blue anodised aluminium housing with various mounting options for cable ties, steel cable, Velcro tape or screw mounting.Additional M10 threaded sleeve on the underside for mini TV spigot or direct mounting on existing components.Very handy stage box for universal use. Perfect not only on stages or trusses, but also as a small problem solver in the toolbox.
Blue anodised aluminium housing with various mounting options for cable ties, steel cable, Velcro tape or screw mounting.Additional M10 threaded sleeve on the underside for mini TV spigot or direct mounting on existing components.Very handy stage box for universal use. Perfect not only on stages or trusses, but also as a small problem solver in the toolbox.