DJ Equipment

Serato Performance Series Control Vinyl in red, A and B side with Control Tone for controlling the Serato Scratch Live software and Serato DJ software.The performance vinyl series contains the well-known Serato NoiseMap control signal in a newly mastered form. This signal is now 6dB louder than before, resulting in much more precise tracking and a more pleasant vinyl feel.Note:Vinyl is an old tradition. The manufacturing process - one part sweat, one part maths and one part magic, it's not an exact science. Each vinyl is pressed and manufactured to the highest quality, however, due to the manufacturing process, slight colour variations or discolouration may occur in each Control Vinyl. Each vinyl is therefore unique.

The Serato 2x12" Logo Picture Vinyl is a two-sided control vinyl pressing. Side A: Serato logo black on white and side B: Serato logo white on black. This series also contains the well-known Serato NoiseMap control signal in a newly mastered form. This signal is now 6dB louder than before, resulting in much more precise tracking and a more pleasant vinyl feel.Note:Vinyl is an old tradition. The manufacturing process - one part sweat, one part maths and one part magic, it's not an exact science. Each vinyl is pressed and manufactured to the highest quality, however, due to the manufacturing process, slight colour variations or discolouration may occur in each Control Vinyl. Each vinyl is therefore unique.

The HEADLINER AVALON DUAL CDJ STAND offers a stable and space-saving solution in the DJ booth, as CDJ or media players can be placed directly above a turntable and mixer setup. The AVALON CDJ STAND can be adjusted in height (up to 48 cm) and tilt, as well as in right/left rotation.The two shelves are equipped with a secure locking system and can also be adjusted in depth between 35.5 and 45.7 cm to suit different models, such as the Pioneer CDJ-3000 or Denon SC-6000. The stable base plate of the HEADLINER AVALON DUAL CDJ STAND is made of hard-wearing, powder-coated steel and offers club mixer models, such as those from Pioneer or Allen & Heath, a secure stand for mobile DJ use.Suitable for: Pioneer CDJ-3000, Pioneer CDJ-2000 NXS2, Pioneer CDJ-2000 NXS, Pioneer CDJ-900 / 850 / 800, Pioneer XDJ- 1000, Pioneer DJM-900 NXS2, Pioneer DJM-900 NXS / SRT, Pioneer DJM-800 / 700 / 600, Pioneer XDJ-1000, Allen & HeathPX5, Allen & Heath Xone DB4 / DB2, Allen & Heath Xone 92 / 62 / 43C, Denon SC-6000 / SC-6000M, Denon SC-5000 / SC- 5000M, Denon X-1850 / X-1800, Denon X1600, Denon SC3900 Denon SC2900, Reloop RMX-90 DVS, Reloop RMX-80 Digital, Ecler NUO4, Rane MP2015, Rane Sixty-Eight / Sixty-Four

With total audio control over 4 DJ software decks, switchable effects and professional inputs and outputs, the NS4FX is a feature-rich DJ controller that unleashes the full creative potential of any event, club or live streaming DJ!feature-rich DJ controller that unleashes the full creative potential of every event, club and live streaming DJ!Mix like an artist:With full audio control over 4 independent channels, DJs can mix tracks, samples, loops and more, with up to 4 DJ software deckssimultaneously. The NS4FX's 4 channels each feature dedicated premium-quality volume faders, 3-band EQ and large high-pass/low-pass filter controlsLow-pass filter controls. Crossfader assignment switches on the front panel allow each channel to be assigned to side A or sideB side of the crossfader, or they can be set to bypass the crossfader. This ultimate flexibility is perfect forcreating an artful mix in a livestream, creating exciting build-ups in the club or preparing multiple songs in advance for eventsin advance for events.Sound like a pro with first-class inputs and outputs:The NS4FX has an impressive range of connectivity options, making it the perfect solution for mobile and event DJs,as well as for club jocks and live streaming mixmasters. The balanced XLR main outputs deliver high quality 24-bit audio so thatEvent guests can always enjoy an incredibly immersive dancefloor experience. The additional RCA booth output with dedicatedControl is perfect for sending audio to a dedicated monitor speaker, or to an additional zone or section of a larger sound systemlarger sound system.For events or performances that require more than one microphone for MCing or speeches, the NS4FX offers two independent 6.3mmMicrophone inputs with dedicated volume and tone controls. The Mic 1 input can easily be set to an Aux option toPlay audio from a smartphone or external media source through the RCA inputs on the back of the controller.Livestreamers who regularly feature guest appearances or play external audio from other sources will certainly appreciate the audioFreedom that the Numark NS4FX offers.High-quality, performance-orientated decks:The NS4FX is packed with all the professional DJ features needed for exceptional performance. Thehigh-quality, touch-sensitive jog wheels have been masterfully calibrated for precise mixing and scratching. The centre of theWheels has a vibrant LED display that shows track position, BPM, pitch range and duration. The layer button on each deckDeck allows each side to quickly switch between controlling multiple decks, making it easy to mix up to 4 trackssimultaneously. The long pitch sliders on each deck with selectable range provide ultra-precise control over the tempo when mixing, and the pitch bend buttonsMixing, and the pitch bend buttons allow fine adjustments for a perfectly tuned mix. The 16 performance pads offerendless mixing possibilities with selectable pad modes, including Cue, Auto Loop, Fader Cuts and Sampler (additional pad modes can be unlocked with Serato DJ Pro)be unlocked with Serato DJ Pro).Professional-level DJ looping and effects control:A dedicated loop section with multipliers on each deck allow quick access to and control over seamless loops toExtend mixes or create your own transitions. For added flair and creativity, the interactive FX section offers6 quick-start software effects that can be triggered with the sturdy and fun paddle toggle switches. The effects sectionalso offers full hardware control over the processed/dry mix and Beat Division helps DJs create an artful and expressive performanceexpressive performance.Ready for Serato DJ Pro:The Numark NS4FX comes with Serato DJ Lite software, allowing DJs to start mixing immediately with 2 channels. As theNS4FX is fully assigned and ready for Serato DJ Pro, DJs can upgrade to a full 4-channel mixing experience at any time!

The CARRY LITE DJ-CASE XXL PLUS is a compact and very lightweight universal case that is ideal for transporting DJ equipment such as DJ controllers, mixers or accessories. The completely rubberised interior is equipped with a variable "Pick & Pluck" foam, which can be individually adapted to different DJ controller models, such as a Pioneer DDJ-FLX10, DDJ-FLX6, DDJ-1000, DDJ-SX2, DDJ-SX3, Denon MCX-8000 or Denon MC-7000. The foam consists of two individual layers, allowing additional compartments for flatter equipment such as laptops or cables to be left out underneath the DJ controller.

One size fits all! The new MULTI-FORMAT CASE PLAYER/MIXER-SET has been specially developed for transporting two CDJ or multimedia players and a 4-channel club mixer. The case can be used universally for all current models from Pioneer DJ, Denon, Allen & Heath, Rane and Reloop and can be customised to different device sizes using the padding provided. The case can also be easily transported from A to B thanks to the built-in castors.

Our high-quality slipmats are made from a particularly soft yet hard-wearing material. They are durable and protect every record.

2 stereo sendsThe two AUX controls send the channel signal to the aux mix outputs for use with external effects processors or, in some applications, local monitors. AUX 1 offers either PRE or POST FADE, while AUX 2 is internally set to post fader.2 stereo returnsTwo basic stereo channels for use as return inputs from external effects processors or other sources. Each return has TRIM to adjust the return signal, input DRIVE switching and CUE routing to Cue A and Cue B. Each return also features metering for visual feedback of the signal level, a LEVEL rotary fader to adjust the mix amount and combined return 1 - 2 low-cut EQ and master filter routing.3 high-performance phono preamps3 high performance turntable inputs, optimised for the club environment to minimise tonal imbalance between vinyl and digital audio and eliminate sub frequency feedback. Each phono input has its own individual turntable ground binding for greater flexibility.Studio quality fadersCustomised TKD 60 mm faders. These dual-rail faders have been carefully selected to ensure long life and smooth operation and feature a heavy feel for greater precision.Precision Sculpting EQSCULPT is a semi-parametric sweep bell filter and consists of two controls: FREQ, which adjusts the centre frequency, and CUT/BOOST, which adjusts the gain or attenuation at that frequency. The degree of cut/boost is asymmetrical; the maximum boost is limited to +8 dB, while the cut is extended to -20 dB. Sculpt has a large Q value and a frequency range that covers almost seven octaves.Contouring low and high pass filtersAs the name suggests, these two controls allow you to "contour" the frequency range of the audio signal. They consist of low-Q, high-pass and low-pass filters that are designed not to add colour to the sound as they are swept across their frequency range.Analogue overdriveA unique feature on each input is the DRIVE control. This control allows the user to set the level at which the channel preamp limits the input signal, producing harmonic distortion as a creative effect.DualCueTwo independent cue systems, A and B. Cue A is routed to the right headphone monitor and Cue B to the left headphone monitor. The DualCue system makes it much easier for two DJs to perform together on the mixer in "Back2Back" setups, as each can select a separate channel to monitor without disturbing the other. This function also helps DJs to hand over to each other smoothly and naturally.Mixer LinkA system that allows multiple mixers to be linked, either for use with two or more artists or to expand the number of channels. When linked together, the consoles share a common balanced mix that feeds the PA and booth monitors. In addition, the two cue systems are linked together and allow interactive cueing between multiple artists.Balanced mix busFully balanced main mix bus (normally only found in very high end analogue studio consoles) - resulting in a dynamic range of >110 dB, improved hum rejection, lower noise and crosstalk.Master high and low pass resonance filterThe master filter consists of a high-pass filter (HPF), a low-pass filter (LPF) and a resonance control (RES) to adjust the sharpness of the high-pass filter. The master filter can be used as a sweep frequency performance effect or as a preset frequency mix tool to instantly cut the low or high frequencies of any channel passed to the filter. Signals can be routed to the MF via the filter selection switch on each channel.Three-band master EQThree-band master EQ with asymmetrical cut and boost, -20/+6 dB, which can be used as a power control as well as a frequency correction tool.Two-band Booth EQA 2-band equaliser that allows the user to adjust the frequency response of the booth monitors to their own preferences.100 % analogueSmooth, intuitive control paired with warm, pure analogue circuitry.Zero-crossing circuitryAll internal routing uses our zero-crossing detection system, which helps to minimise audio switching artefacts when selecting channel filters, switching the master filter on/off and switching the master EQ on/off. This system allows each of these functions to be used quickly and intuitively as a performance effect.Quality componentsBeautifully smooth components, each controlling a specific function, for intuitive, spontaneous creative performances.External power supplyPowered by an external 90W 24V universal power supply. Internally, the 24 volts from the external supply is converted to just under +/- 20 V for the analogue power rails using high frequency switching technology, giving MODEL 1 the highest signal headroom of any professional mixing console, regardless of application.Dual power supplyMODEL 1 offers the benefit of dual power supply. This feature, found on premium live sound and recording consoles, can provide more security by simultaneously powering the console from a second power supply. In scenarios such as music festivals, each supply can be fed from separate mains phases. Should one phase fail, the other supply automatically takes over to power the mixer.Built in the UKBuilt in the UK with our partners DigiCo and Allen & Heath using an alloy/steel chassis for maximum strength and minimum weight, optimised for touring, club and performance situations.D-Subs inputTwo fully balanced TASCAM DB25 inputs receive all 8 stereo channels for fast connections to external sound cards and added flexibility in club installations.D-Sub outputFully balanced TASCAM DB25 output to send Master, Aux 1 & 2 sends and Cue B channels via a single connector for fast connections to external sound cards and added flexibility in club installations.Front mounted REC-OutThe RECORD OUT - 3.5 mm TRS jack socket is mounted on the front panel at the top of the master section and feeds the post-master EQ signal as a pre-fader recording output. The nominal level is -2 dB

Serato Studio is the intuitive beatmaker DAW software for DJs and producers. Thanks to the perfect workflow, stumbling blocks for beginners and professionals are skilfully cleared out of the way. Complex beats and edits can be created in record time. Everything can, nothing must: Serato Studio provides the user with unique creative tools. Features such as automatic pitch adjustment, one-click keyshifting or the generation of drum patterns are integrated directly into Serato Studio. This allows you to create powerful songs without any prior musical or audio knowledge. Edit your favourite tracks: Simple and intuitive creation of DJ edits, mashups and remixes. Tools such as the Endless Slicer can be used to work and experiment creatively with sound files. Serato Studio Plug & Play also works with Serato DJ certified hardware, so you can control samples, effects and much more with your Serato controller.

The M6 is a flexible 4-channel DJ mixer to which you can connect not only traditional DJ equipment, such as turntables and CD players, but also a computer via USB. With the plug-and-play connection to a Mac or PC, tracks from the computer can be integrated into the performance and sets can be recorded in almost any audio software.The M6 features essential performance tools such as a 3-band EQ and LED level meter per channel. The interchangeable crossfader has slope control. Each channel can be assigned to one side of the crossfader.The separate microphone channel of the M6 has an XLR connection. An additional microphone with a 6.3 mm jack can also be connected to channel 4. The M6 provides balanced outputs for connection to a sound system.The M6 combines the flexibility of a 4-channel mixer with the versatile possibilities of a USB computer connection.

The MK2 version features a number of improvements, such as the newly developed top panel design and redesigned metal buttons with an improved feel.The robust construction with optimised damping properties has a vibration-inhibiting effect, while shock-absorbing feet on the underside of the turntable contribute to further insulation.

The DJM-S5 is the first mixer from Pioneer DJ that can be powered via a computer's USB port. Enjoy the added flexibility - and, if you use portable turntables - the freedom to practice and play anywhere you can carry your decks: the garden, a park or even the beach. It also works as a standalone mixer, so you can play your music from a variety of sources - for example, analogue vinyl records. And although the mixer is USB-powered, it produces a clear sound with a wide frequency bandwidth, allowing you to get the best out of all genres of music.

Just take it with you and put it on: Turn any place into a party location in no time at allThanks to its compact size, low weight and rounded corners, the OMNIS-DUO is easy to put in a rucksack and take anywhere. The 2-deck + mixer layout looks instantly familiar and simply feels good when DJing. Thanks to two touchscreen modes (light and dark), which you can switch between instantly, you can always see all the information clearly, whether in the dark indoors or in the light outdoors. Integrated rechargeable battery: hang up without additional power supply and less equipment to transport The OMNIS-DUO plays for up to five hours without being connected to the mains. The battery can simply be charged using the mains adapter or connected to a compatible power bank (45 W or more). The special USB type C connection is available for this purpose. If the music needs to keep playing and the battery capacity is running low, the eco mode comes to the rescue. This extends the life of the battery and therefore also the party. In combination with the new battery-powered WAVE-EIGHT speaker, which has SonicLink technology with extremely low latency on board, the absolute freedom of wireless DJing opens up.Flexible audio output options - play anywhere & without limits As the first all-in-one DJ system with Bluetooth audio output, the OMNIS-DUO opens up a whole new world of possibilities. Whether you're at a campsite or on the beach, you can DJ anywhere. It can even be connected to a car sound system. Ideal for unlimited party fun in almost any location. But the OMNIS-DUO can also be safely connected via the professional XLR output when DJing in a party location, e.g. a bar. The RCA connections are perfect for connecting to monitor speakers at home.Bluetooth audio input - share with the crowd and create customised sets.Nothing is more disappointing than not being able to fulfil a song request. Using the Bluetooth input, it is now possible to connect mobile devices such as smartphones to the OMNIS-DUO to play song requests directly from the audience and incorporate them into a set. Thanks to the industry's first Bluetooth playback, you always have the sound under control and can adjust the volume and equaliser and refine the sound with effects. The OMNIS-DUO also allows tempo changes, offers hot cues and makes scratching possible. And it can also play prepared tracks from other music sources. Bluetooth also opens up completely new creative possibilities for collaborating with other DJs and friends. Ideal for expanding your own musical experience.Supports various music sources - for perfect customisation to any DJ styleThe OMNIS-DUO plays music from almost any source, whether USB Type-A discs or SD cards. Both can be connected directly to the OMNIS-DUO, as can a PC/Mac via the USB Type-C port. When connected to a computer, rekordbox Performance mode is also supported. The Wi-Fi® function enables easy access to tracks on a PC/Mac, smartphone or the cloud without a cable connection*. Compatibility with Serato DJ Lite will also be available from summer.*Available with Link Export and the CloudDirectPlay function in rekordbox for Mac/Windows or rekordbox for iOS/Android.Brand new design: good looks in any environmentThe OMNIS-DUO cuts a fine figure everywhere - from professional events to spontaneous outdoor parties. Its new indigo blue colour is inspired by denim jeans and the unique curves of the device create a sleek silhouette. The print on the top is minimalist and contributes to a sophisticated look. The OMNIS-DUO is designed to be both casual and fun, making it the device you want to take with you everywhere.AlphaTheta Corporation announces the new AlphaTheta brand. This draws on the experience gained and built up under the Pioneer DJ brand. To launch, AlphaTheta introduces WAVE-EIGHT, a portable, wireless DJ speaker that makes it easy to DJ in places you never thought possible.