Lighting

The Freedom H1 is a compact washlight, 100% battery-powered and equipped with a Hex-Colour (RGBAW+UV) 10W LED and integrated D-Fi transceiver. Its magnetic base enables easy mounting on many metal surfaces, and the magnetic gel holder supplied allows filters and gradients to be changed quickly. Thanks to its compact design, the Freedom H1 is easy to transport and set up. The Freedom H1's digital display allows easy control and adjustment of all settings. The numerous control options include stand-alone operation, wireless DMX and IR. The Freedom H1 X4 system includes 4 spotlights, 4 diffusers, a transport bag, a multi-charger and the IRC-6 remote control.

With the Truss Twister, it is possible to rotate mirror balls with a diameter of up to 75 cm. The truss twister is placed on the truss post for this purpose. By rotating the mirror balls, great effects can be created.

Small plano-convex lens spotlight with high colour rendering index (CRI) of over 90 and with 40 W LED

Rechargeable LED truss light with QuickDMX for mobile use

The Cameo PixBar 650C PRO is a 53° wide-beam professional LED bar equipped with 8 particularly powerful 30 watt COB LEDs that produce homogeneous and seamless colour mixtures. The light bar operates completely silently and flicker-free thanks to efficient convection cooling and a high repetition rate of 3,000 Hz. The PixBar 650C PRO is fully RDM-capable and can communicate bidirectionally with RDM controllers and read out the address, all parameters and the status of the LED bar. The light bar can also be controlled via the standard DMX protocol in 6 modes or used as a standalone, master and slave. It has automated programmes and a microphone for music control, while 4 function buttons and a backlit display are used for manual operation. In addition to rich RGB colours and macros matched to LEE filters, the PixBar 650C PRO offers colour temperature correction and 4 selectable dimmer curves. With its single pixel control, all LEDs can also be individually controlled and impressive chase effects created. The robust aluminium housing of the Cameo PixBar 650C PRO is equipped with 3-pin and 5-pin DMX inputs and outputs as well as powerCON mains connectors from Neutrik. The stable stand with easy-grip adjustment screws also serves as a mounting bracket.

The Tour Hazer II is a hazer with experience on stages worldwide.The water-based fluid enables the clean production of fine haze. The special fluid of the Tour Hazer enables us to minimise the consumption of the device. The Tour Hazer II requires only 1 ml/min at 40% output. A 5 litre canister of Tour Hazer Fog is therefore sufficient for 83 hours, i.e. 3.5 days of continuous haze. On a lower setting, runtimes of up to 5 days of continuous haze can be achieved with a 5 litre canister. Two DMX channels enable a customised effect that can be regulated from very fine, barely visible haze to fog-like output.With the standard phenol case, the device can be set up in just a few seconds after removing the case lid. Just 60 seconds after plugging in the mains cable, the Tour Hazer II is heated up and ready for use.The phenolic case is manufactured in Germany and has been protecting our hazer for over 10 years in tough everyday touring conditions.Another advantage of the case design is that it can be used in almost any position. Only the side with the air inlet should not be tilted during operation. This means that the Tour Hazer II can also be optimally positioned on small stages. With the variable air baffle, the haze can still be directed in the desired direction. The use of high-quality materials guarantees a long service life for the device.To be able to use the device effectively and maintain its long service life, only the Tour Hazer Fluid should be used!When using original fluid, Smoke Factory grants a 3-year guarantee on its devices.

VERSATILITY:The DMX Commander 512 enables the control of up to 16 fixtures with up to 32 DMX channels each. A fixture can be a moving head, for example, or it can be 32 individual spotlights, each with a dimmer, or 8 spotlights with RGBW colour mixing. A theatre with 48 classic spotlights, 16 RGBW spotlights and 4 moving heads can be easily controlled with only half of the console occupied.FUNCTIONALITY:Moving heads and other modern spotlights offer numerous functions that cannot be controlled via dimmer channels. The DMX Commander 512 therefore separates dimmer and function channels. This allows the brightness of a scene to be reduced without changing the function channels. In addition, all function channels can be set to the correct setting before the brightness is increased.FLEXIBILITY:A total of 57 memory locations are available for programming, 54 of which can be called up on 9 faders via 6 pages. Three memory locations with page-independent faders can be called up at any time and are suitable for frequently used settings such as audience lighting, front lighting or a hazer. Each memory location can contain a single mood or an entire sequence of a piece. The sequence can be run manually using the Go button or automatically, whereby the speed can be memorised, set using a speed controller, clocked using the Tap button or music-controlled. This sequence control can be set individually for each memory location, including the fade time.CLARITY:A clear overview is essential for a console with so many faders. The spotlights can be created and patched as fixtures in order to organise the channels clearly. In addition, all functions can be labelled and displayed using the buttons above the operating faders. The various memories can also be labelled. The DMX-Commander 512 is supplied with neutral white fader caps, but also includes 8 caps in 7 other colours to create your own colour scheme for the faders for manual input and the memories.CONNECTIONS:The DMX Commander 512 is designed for installation in a 19-rack. Connections for 3-pin or 5-pin DMX signals and a 6.3 mm jack connection for the audio signal are located on the rear. The power connection is made via a P-Con plug. There are two USB ports on the surface, one for the USB stick supplied and one as a power source, for example for a console light.

The LED Strobe SMD PRO 132 DMX RGB offers you three functions at once. The 132 bright RGB SMD LEDs not only flash to create an insane stage thunderstorm. They can also be used as a bright blinder for longer periods of time. Depending on the selected DMX mode, up to 15 colours can be selected directly in the menu to create colourful wash effects.The built-in SMD LEDs are flicker-free and therefore the effect can also be used in a TV studio.The strobe has auto, music, master/slave and DMX modes and offers three-pin DMX connections as well as an IEC connection for the power supply. There are 7 different DMX modes available, each with 1, 2x2, 3x3, 4 or 6 DMX channels. The flash frequency and flash duration are variably adjustable. The operation and options are therefore clearly structured and can be ideally customised for every application.

Cameo Gear Bags are the convenient way to carry and protect your equipment. They are made from strong, extremely durable materials and have adjustable dividers for perfect organisation of the interior and spacious outer pockets for accessories. Cameo Gear Bags are available in different sizes.

Cameo Gear Bags are the convenient way to carry and protect your equipment. They are made from strong, extremely durable materials and have adjustable dividers for perfect organisation of the interior and spacious outer pockets for accessories. Cameo Gear Bags are available in different sizes.

The Thunder Wash 600 W is a strobe, blinder and wash light in one.It is equippedwith 648 whiteSMD LEDs, each with a power of 0.2 watts, a beam angle of 80° and a compact black metal housing with universal mounting bracket.The Thunder Wash 600 W has 3-pin XLR sockets for DMX input and output, 5 DMX modes with dimmer, flash rate and flash duration functions and the option of master, slave or standalone operation. An easy-to-read LED display with buttons for Mode, Enter, Up and Down is used for manual control, while the built-in microphone is used for sound control.

Set up, connect, done! With the FLAT PRO® 18 G2 LED PAR spotlight, you have a professional outdoor all-rounder that takes a lot of work off your hands under adverse conditions - whether as a calibrated and compact IP65 uplight on the façade of a building, as a silent light supplier in the theatre or as an effect light for your live show.Thanks to the patented EZChase® function (DMX Delay), you can create chases without an external controller. This not only saves DMX channels, but also time and nerves. The calibration chip ensures that solid and pastel colours from the RGBWA colour spectrum are implemented without deviations.The FLAT PRO® 18 G2 is based on 18 x 10 watt 5-in-1 RGBWA LEDs for an impressive luminous flux of 6,600 lm. Thanks to the adjustable PWM frequency (650 Hz - 25 kHz), you don't have to worry about flickering LEDs when dimming in theatres, TV studios, on film sets or at light art festivals.An outdoor IP65 flat PAR spotlight is only as good as its handling. For this reason, we have optimised the design of the series in many areas. For example, the handle has been inconspicuously integrated into the compact metal housing, while the OLED display with touch-sensitive buttons enables quick and easy operation of the device. After all, every second counts in wind and weather. The revised convection cooling and the professional connection options with Neutrik True-compatible inputs and outputs and 3-pin IP65 DMX sockets ensure maximum reliability.For even more flexible mounting, the FLAT PRO® 18 G2 can be optionally retrofitted with a fold-out 16 mm TV spigot based on the patented SPIN16® technology.The versatile FLAT PRO® 18 G2 IP65 LED PAR spotlight is suitable for all lumen beings who want to live out their passion for light outdoors without compromise.