ADJ Event Facade II White
€262.00
card.manufacturer:
The Event Facade II WH from ADJ is ideal for professionally covering your equipment while creating a sleek, professional look. Perfect for anyone looking for a lightweight, portable and quick to set up facade that enhances the overall look. Available in an elegant white or a dynamic black colour. The stretch fabric of the panels can be easily removed for cleaning or replaced depending on the desired colour combination. The carrying bag included allows easy storage and convenient transport. No tools are required to set up, dismantle or remove the stretch panels. The Event Facade II WH consists of a white metal frame and 4 black and 4 white stretch fabrics.
Global Truss F34 3-way corner T35
€319.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F14 150cm
€133.00
card.manufacturer:
The F14 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 10cm. The small design of the trusses is ideal for shopfitting and small constructions with low loads. Spans of up to 7 metres are possible. The F14 truss is made of 20x2 mm chord tubes and 6 mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected to each other using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F24 2-way corner C20 60°
€264.00
card.manufacturer:
The F24 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F24 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
Alutruss DECOLOCK DQ3-PAL32 3-way corner 90°
€239.00
card.manufacturer:
DECOLOCK DQ3 3-point truss systemThe DECOLOCK DQ3 system is a 3-point truss system made of aluminium, which is connected via three conical connectors, pins and split pins.The advantage of conical connectors is that they form a positive and non-positive connection with the chord tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables fast, efficient and visually appealing assembly with frequent assembly and disassembly. 35 mm aluminium tubing with 2 mm wall thickness is used for the three chord tubes, offering sufficient load-bearing capacity with a low dead weight. The struts have a diameter of 10 mm with 2 mm wall thickness and give the system a decorative appearance.DECOLOCK can be used to create compact installations with a low dead weight, e.g. for use in shop windows, shop decorations, exhibitions, interior design, exhibition stands, shop fitting, discotheques and theatres.DECOLOCK is primarily designed for decorative installations, but its aesthetic appearance makes it suitable for both temporary and permanent structures. The advantages of this system are its compact design with external dimensions of 220 or 195 mm, low weight, optimum strength and quick and easy installation. The documentation for this truss system is closely based on the SQ P1 truss standard published by the VPLT. The load table as a basis for calculation can be downloaded from the Internet before purchase! Please note: This truss system must never be combined with other systems!
Global Truss F32 2-way corner C19 45° V
€130.00
card.manufacturer:
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss cube for F22 - F24
€23.50
card.manufacturer:
"[TAB:Technical data] <table width=""100%"" border=""0""> <tr> <td width=""42%"" bgcolor=""#CCCCCC"">Lä.nge</td> <td width=""58%"" bgcolor=""#CCCCCC"">38 mm</td> </tr> <tr bgcolor=""#CCCCCCCC""> <td bgcolor=""#FFFFFF"">Width</td> <td bgcolor=""#FFFFFFFF"">38 mm</td> </tr> <tr> <td bgcolor=""#CCCCCCCC"">Hö.he</td> <td bgcolor=""#CCCCCC"">38 mm </td> </tr> <tr> <td>Weight</td> <td>0.3 kg</td> </tr> </table>"
Global Truss F34 18cm
€135.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss GT Stage Deck Skirt Click profile 970mm incl. Velcro fastener
€41.50
card.manufacturer:
Note: Stairs cannot be installed at a point where a skirt profile is fitted.
Global Truss F34 Smart PA Tower
€5,798.00
card.manufacturer:
The Global Truss Smart PA Tower is easy to set up and is ideal for small to medium-sized outdoor applications. Based on the Multi-Basement, the tower can be built with standard trusses from the F34 or F34P series and only the pulleys for the TOP section are required. This avoids unnecessary special parts in stock. The top boom can be designed with a 50cm or a 75cm section. There are 2 variants for the positioning of the basement boom, one of which can be freely selected depending on requirements. The dead weight of the PA system can be counted as a live load. The ballasting is therefore dependent on the suspended load, the minimum ballast is 40/60kg. Features: Payload: 300kgMaximum wind load area: 1.5m²Overall height: 4.95mincl. stability certificateFree of building regulationsTruss system: F342 variants for the basement outriggers
Global Truss F34 circle piece for Ø 6.0m 30°
€450.00
card.manufacturer:
The F34 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 29 cm. Due to its ideal load capacity in relation to its own weight and external dimensions, this truss is one of the most popular systems on the market. The trusses in this series are suitable for trade fair and shop construction, as well as trusses for stage roofs and other outdoor applications. This truss system is designed for spans of up to 18 metres. The F34 truss is manufactured with 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Global Truss F34 T40 Joint 4-way
€384.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F44 500cm
€814.00
card.manufacturer:
The F44 truss from Global Truss can be mounted both horizontally and vertically. The main areas of application are event technology, trade fair construction, theatre technology and stage construction. The truss system is suitable for horizontal installation at low room heights and is compatible with Eurotruss FD44.
Global Truss F34 200cm stage black
€319.00
card.manufacturer:
The F34 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 29 cm. Due to its ideal load capacity in relation to its own weight and external dimensions, this truss is one of the most popular systems on the market. The trusses in this series are suitable for trade fair and shop construction, as well as trusses for stage roofs and other outdoor applications. This truss system is designed for spans of up to 18 metres. The F34 truss is manufactured with 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Alutruss DECOLOCK DQ3-PAC44 4-way corner left
€315.00
card.manufacturer:
DECOLOCK DQ3 3-point truss systemThe DECOLOCK DQ3 system is a 3-point truss system made of aluminium, which is connected via three conical connectors, pins and split pins.The advantage of conical connectors is that they form a positive and non-positive connection with the chord tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables fast, efficient and visually appealing assembly with frequent assembly and disassembly. 35 mm aluminium tubing with 2 mm wall thickness is used for the three chord tubes, offering sufficient load-bearing capacity with a low dead weight. The struts have a diameter of 10 mm with 2 mm wall thickness and give the system a decorative appearance.DECOLOCK can be used to create compact installations with a low dead weight, e.g. for use in shop windows, shop decorations, exhibitions, interior design, exhibition stands, shop fitting, discotheques and theatres.DECOLOCK is primarily designed for decorative installations, but its aesthetic appearance makes it suitable for both temporary and permanent structures. The advantages of this system are its compact design with external dimensions of 220 or 195 mm, low weight, optimum strength and quick and easy installation. The documentation for this truss system is closely based on the SQ P1 truss standard published by the VPLT. The load table as a basis for calculation can be downloaded from the Internet before purchase! Please note: This truss system must never be combined with other systems!
Global Truss F32 circle piece for Ø 3.0m 90° V
€243.00
card.manufacturer:
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F34 Box Cornerblock stage black
€399.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.