Content: 3 Meter (€56.33 / 1 Meter)
Global Truss F34 3-way corner T35
€319.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
ADJ Event Facade II White
€262.00
card.manufacturer:
The Event Facade II WH from ADJ is ideal for professionally covering your equipment while creating a sleek, professional look. Perfect for anyone looking for a lightweight, portable and quick to set up facade that enhances the overall look. Available in an elegant white or a dynamic black colour. The stretch fabric of the panels can be easily removed for cleaning or replaced depending on the desired colour combination. The carrying bag included allows easy storage and convenient transport. No tools are required to set up, dismantle or remove the stretch panels. The Event Facade II WH consists of a white metal frame and 4 black and 4 white stretch fabrics.
Global Truss F22 Circle piece for Ø 10.0m 30° H
€223.00
card.manufacturer:
The F22 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 22 cm. This system is ideal for realising smaller constructions with low loads as a grid ceiling for exhibition stands and permanent installations. Spans of up to 7 metres are possible in the grid system. The F22 truss is made of 35x1.6 mm chord tubes and 8 mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Adam Hall Accessories 0152 X 36 Stage molleton B1 black with eyelets burnished 3 x 6 m
€169.00
card.manufacturer:
Opaque, black stage molton with flame-retardant impregnation (B1 according to DIN 4102) and 300-gram quality, as a curtain, backdrop or for decorative purposes. The fabrics are eyeleted on one side at 25 centimetre intervals and backed with additional webbing, allowing the fabric to be attached quickly and securely both tautly and with loose folds. Stainless steel eyelets with a hole diameter of 12 millimetres are used. The outer edges are hemmed, the bottom edge unhemmed, so that the fabric can be quickly and easily cut to the required length yourself
Global Truss mount for base plate black
€25.00
card.manufacturer:
Holder for screwing onto the base plate. This connector is required to firmly connect the telescopic pole to the base plate. The curtain system was specially developed to separate large rooms from each other or to elegantly cover or conceal stage situations and unsightly stage backs with curtains. Entrances and the like can also be elegantly embellished, e.g. at glamorous gala events, award ceremonies or theatre performances.
Global Truss F24 100cm
€160.00
card.manufacturer:
The F24 truss from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 4-point truss system is ideal for space-saving transport.
Global Truss Selflock Hook Mini 48-51/30/100kg
€7.20
card.manufacturer:
The advantages of the 812 Hook are obvious. The manageability and slim design of an 812 coupled with the option of simple hooking like a classic hook. Like all couplers in the 812 series, the 812 Hook is an ideal solution for small and medium-sized devices. The 812 Hook impresses with the usual Global Truss quality and reliability.
Global Truss Swivel Coupler Slim 48-51/30 (5025)
€21.00
card.manufacturer:
This half coupler impresses with a width of just 30 mm, making iteasier to attach to a crossbar without an annoying brace getting in the way. The centre joint of this coupler can be rotated and any angle can be realised.
Global Truss F24 circle piece for Ø 8.0m 45°
€566.00
card.manufacturer:
The F24 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F24 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
Global Truss F34 C41 X Joint
€369.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F34 3-way corner T35 stage black
€421.00
card.manufacturer:
The F34 3-way corner from Global Truss offers optimum load-bearing capacity and is characterised by its low transport volume and lightweight construction. It is also compatible with the Eurotruss FD34 truss system. The 4-point truss is available powder-coated with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F43 300cm
€410.00
card.manufacturer:
The F43 truss from Global Truss can be mounted both horizontally and vertically. The main areas of application are event technology, trade fair construction, theatre technology and stage construction. The truss system is suitable for horizontal installation at low room heights and is compatible with Eurotruss FD43. The truss is available powder-coated in many different colours with a corresponding delivery time.
Global Truss F34 80cm
€179.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F14 circle piece for circle 2.0m Ø / 90 °
€219.00
card.manufacturer:
The F14 truss is a decorative truss, suitable for home use, display applications, shop and trade fair construction, advertising, etc.
Eurolite TCH-50/30
€10.90
card.manufacturer:
C-hook for suspending trusses, aluminium bars, aluminium tubes, etcFor trusses with a tube diameter of 50 mm
Global Truss F34 2-way corner C21 90° stage black
€295.00
card.manufacturer:
The F34 2-way corner from Global Truss offers optimum load-bearing capacity and is characterised by its low transport volume and lightweight construction. It is also compatible with the Eurotruss FD34 truss system. The 4-point truss is available powder-coated with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Alutruss QUADLOCK QL-ET34-300 4-point traverse
€169.00
card.manufacturer:
QUADLOCK QL-ET34 4-point truss systemThe QUADLOCK QL-ET34 is a 4-point truss system made of aluminium, which is connected via four conical connectors, pins and split pins. The QUADLOCK QL-ET34 uses the solid alloy EN-AW 6082 T6 (AlMgSi1 T6) for high load-bearing capacity, and the advantage of conical connectors is that they are friction-locked and form-fit with the chord tube, thus guaranteeing maximum load-bearing capacity. The Quick-Lock system enables quick, efficient and visually appealing assembly with frequent assembly and disassembly. The four belt tubes are made of 50 mm aluminium tube with a wall thickness of 2 mm and give this system an excellent weight/load capacity ratio. The struts have a diameter of 20 mm with 2 mm wall thickness and give the system its stability.290 mm external dimensions make this a stable truss system for higher loads and longer durability. This truss system is primarily designed for intensive use in stage construction, trade fair construction, event technology, but also for permanent installations in discotheques and theatres, and its polished surface makes this universal system a real eye-catcher. Thanks to its extensive range of standard system lengths, corners and accessories, this system is extremely versatile and offers endless design possibilities. The load table as a basis for calculation can be downloaded from the Internet before purchase! ALUTRUSS truss elements are manufactured in Europe and welded together by specially trained welders certified by SLV Please note: This truss system must never be combined with other systems!
