Global Truss F34 3-way corner T35
€319.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
ADJ Event Facade II White
€262.00
card.manufacturer:
The Event Facade II WH from ADJ is ideal for professionally covering your equipment while creating a sleek, professional look. Perfect for anyone looking for a lightweight, portable and quick to set up facade that enhances the overall look. Available in an elegant white or a dynamic black colour. The stretch fabric of the panels can be easily removed for cleaning or replaced depending on the desired colour combination. The carrying bag included allows easy storage and convenient transport. No tools are required to set up, dismantle or remove the stretch panels. The Event Facade II WH consists of a white metal frame and 4 black and 4 white stretch fabrics.
Global Truss F23 3-way corner C34
€209.00
card.manufacturer:
The 3-way corner from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 3-point truss system is ideal for space-saving transport. Conical connectors are included in the scope of delivery.
Global Truss F33 T39 3-way-vertical T apex up
€269.00
card.manufacturer:
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres. The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss f32r30-45h for circle 6.0m / 1 piece 45 °
€218.00
card.manufacturer:
The F32 truss from Global Truss can be mounted both horizontally and vertically. It is mainly used for event technology, trade fair and shop construction or for horizontal installation in low rooms. With an extended delivery time, the truss is also available powder-coated in many different colours.
Alutruss DECOLOCK DQ3-PAC41 4-way cross
€259.00
card.manufacturer:
DECOLOCK DQ3 3-point truss systemThe DECOLOCK DQ3 system is a 3-point truss system made of aluminium, which is connected via three conical connectors, pins and split pins.The advantage of conical connectors is that they form a positive and non-positive connection with the chord tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables fast, efficient and visually appealing assembly with frequent assembly and disassembly. 35 mm aluminium tubing with 2 mm wall thickness is used for the three chord tubes, offering sufficient load-bearing capacity with a low dead weight. The struts have a diameter of 10 mm with 2 mm wall thickness and give the system a decorative appearance.DECOLOCK can be used to create compact installations with a low dead weight, e.g. for use in shop windows, shop decorations, exhibitions, interior design, exhibition stands, shop fitting, discotheques and theatres.DECOLOCK is primarily designed for decorative installations, but its aesthetic appearance makes it suitable for both temporary and permanent structures. The advantages of this system are its compact design with external dimensions of 220 or 195 mm, low weight, optimum strength and quick and easy installation. The documentation for this truss system is closely based on the SQ P1 truss standard published by the VPLT. The load table as a basis for calculation can be downloaded from the Internet before purchase! Please note: This truss system must never be combined with other systems!
Crash Barrier Dolly for 10 pieces
€499.00
card.manufacturer:
Transport dolly for 10 Crash Barriers. The crash barriers from TEGO PRO are made of lightweight aluminium and can be used to cordon off all kinds of indoor and outdoor events. Whether at concerts, sporting and political events, demonstrations or public viewing events, the stage barriers from TEGO PRO ensure optimum safety.
Global Truss F43 450cm
€568.00
card.manufacturer:
The F43 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 40cm. This system is used to realise individual sections as well as more complex structures with higher loads. This truss system is designed for a span of up to 18 metres. The F43 truss is made of 50x2mm chord tubes and 25x3mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F22 Circle piece for Ø 8.0m 45° H
€253.00
card.manufacturer:
The F22 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 22 cm. This system is ideal for realising smaller constructions with low loads as a grid ceiling for exhibition stands and permanent installations. Spans of up to 7 metres are possible in the grid system. The F22 truss is made of 35x1.6 mm chord tubes and 8 mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Adam Hall Accessories 0155100B Gauze type 100 black unassembled 3m width / running metre
€43.60
card.manufacturer:
Gaze 100 is a particularly fine-meshed, wind-permeable polyethylene mesh fabric with very high opacity for panelling, curtains and as a privacy screen in stage and event technology, trade fair construction and many other areas. The hard-wearing, tear-resistant material is available by the metre in 3 m widths and made up with eyelets and hems in various sizes and in the colours black and white.Gaze 100 is acid- and weather-resistant, heat-resistant and water-repellent. Clamps and cable ties are available as accessories for fastening.
Global Truss F32 150cm stage black
€157.00
card.manufacturer:
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F22 400cm
€159.00
card.manufacturer:
The F22 truss is a decorative truss, suitable for shop and exhibition stand construction, advertising, etc. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application are exhibition stand construction, shop fitting and advertising.
Global Truss F33 75cm
€124.00
card.manufacturer:
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres. The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F14 base plate round 250mm
€51.00
card.manufacturer:
The F14 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 10cm. The small design of the trusses is ideal for shopfitting and small constructions with low loads. Spans of up to 7 metres are possible. The F14 truss is made of 20x2 mm chord tubes and 6 mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected to each other using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F34 20cm
€138.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F33 circle piece for Ø 6.0m 45°
€398.00
card.manufacturer:
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres. The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F22 4-way corner C41 V
€164.00
card.manufacturer:
The F22 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 22 cm. This system is ideal for realising smaller constructions with low loads as a grid ceiling for exhibition stands and permanent installations. Spans of up to 7 metres are possible in the grid system. The F22 truss is made of 35x1.6 mm chord tubes and 8 mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss anchor point for F33/F34 galvanised, 750kg
€135.00
card.manufacturer:
With the Gizmo from Global Truss it is possible to suspend trusses. The new design offers a higher load capacity. The Gizmo is suitable for operation above people and is supplied with two half couplers.