Truss
Global Truss F34 3-way corner T35
€319.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F34 circle piece for Ø 12.0m 30°
€675.00
card.manufacturer:
The F34 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 29 cm. Due to its ideal load capacity in relation to its own weight and external dimensions, this truss is one of the most popular systems on the market. The trusses in this series are suitable for trade fair and shop construction, as well as trusses for stage roofs and other outdoor applications. This truss system is designed for spans of up to 18 metres. The F34 truss is manufactured with 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Global Truss U-Frame 100
€189.00
card.manufacturer:
With U-Frame 100 and U-Top 100, Global Truss now offers an extremely flexible and completely modular solution for free-hanging spotlights. The lightweight system allows a theoretically infinite configuration of single and double suspensions as well as ladder systems with multiple spotlights - both suspended and upright. Each combination of the two modules can carry a maximum point load of 93 kg. The practical safety fixings on each side of the U-frame also allow a wide range of spotlight types to be mounted. For ladder configurations, up to ten U-Frame 100 / U-Top 100 combinations can be attached to each other without the need for further rigging measures. They can be suspended using the eyebolts supplied or with swivel couplers. U-Frame 100 and U-Top 100 were deliberately developed by Global Truss to be quick and easy to handle and can be used in a wide variety of event environments. U-Frame 100 and U-Top 100 are available in a silver and black finish as standard. Other colours can be produced on request.
Global Truss F34 3-way corner T35 710mm
€406.00
card.manufacturer:
The F34 T35 710 from Global Truss is a 90° 3-way corner with a length of 710 mm. This T35 piece therefore offers optimised combination options with other corners without the use of levelling pieces.
Global Truss F22 450cm
€181.00
card.manufacturer:
The F22 truss is a decorative truss, suitable for shop and exhibition stand construction, advertising, etc. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application are exhibition stand construction, shop fitting and advertising.
Global Truss F32 50cm stage black
€90.00
card.manufacturer:
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F34 2-way corner C21 90° rounded
€356.00
card.manufacturer:
The F34 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 29 cm. Due to its ideal load capacity in relation to its own weight and external dimensions, this truss is one of the most popular systems on the market. The trusses in this series are suitable for trade fair and shop construction, as well as trusses for stage roofs and other outdoor applications. This truss system is designed for spans of up to 18 metres. The F34 truss is manufactured with 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Global Truss F22 Circle piece for Ø 6.0m 60° H
€207.60
card.manufacturer:
The F22 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 22 cm. This system is ideal for realising smaller constructions with low loads as a grid ceiling for exhibition stands and permanent installations. Spans of up to 7 metres are possible in the grid system. The F22 truss is made of 35x1.6 mm chord tubes and 8 mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Alutruss TRILOCK S-210 3-point truss black
€149.00
card.manufacturer:
TRILOCK 6082 3-point truss systemThe TRILOCK 6082 is a 3-point truss system made of aluminium, which is connected via three conical connectors, pins and cotter pins. TRILOCK 6082 uses the solid alloy EN-AW 6082 T6 (AlMgSi1 T6) for high load-bearing capacity. The advantage of conical connectors is that they form a positive and non-positive connection with the belt tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables quick, efficient and visually appealing assembly with frequent assembly and disassembly. The three chord tubes are made of 50 mm aluminium tube with 2 mm wall thickness and give this system an excellent weight/load capacity ratio. The struts have a diameter of 16 mm with a wall thickness of 2 mm and leave plenty of room for attaching couplers, hooks and clamps. With external dimensions of 290 mm and 257 mm respectively, this is a stable truss system for higher loads and longer durability. This truss system is primarily designed for intensive use in stage construction, trade fair construction and event technology, but also for permanent installations in discotheques and theatres. Its polished surface makes this universal system a real eye-catcher. Thanks to its extensive range of standard system lengths, corners, circles and accessories, this system is extremely versatile and offers endless design possibilities. The production of this truss system is monitored by TÜV. The load table as a basis for calculation can be downloaded from the Internet before purchase!
Global Truss F34 100cm
€189.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F33 circle piece for Ø 2.0m 90°
€279.00
card.manufacturer:
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres. The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F43 3-way corner C33 90°
€381.00
card.manufacturer:
The F43 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 40cm. This system is used to realise individual sections as well as more complex structures with higher loads. This truss system is designed for a span of up to 18 metres. The F43 truss is made of 50x2mm chord tubes and 25x3mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Alutruss TRILOCK 6082-710 3-point traverse
€150.00
card.manufacturer:
TRILOCK 6082 3-point truss systemThe TRILOCK 6082 is a 3-point truss system made of aluminium, which is connected via three conical connectors, pins and cotter pins. TRILOCK 6082 uses the solid alloy EN-AW 6082 T6 (AlMgSi1 T6) for high load-bearing capacity. The advantage of conical connectors is that they form a positive and non-positive connection with the belt tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables quick, efficient and visually appealing assembly with frequent assembly and disassembly. The three chord tubes are made of 50 mm aluminium tube with 2 mm wall thickness and give this system an excellent weight/load capacity ratio. The struts have a diameter of 16 mm with a wall thickness of 2 mm and leave plenty of room for attaching couplers, hooks and clamps. With external dimensions of 290 mm and 257 mm respectively, this is a stable truss system for higher loads and longer durability. This truss system is primarily designed for intensive use in stage construction, trade fair construction and event technology, but also for permanent installations in discotheques and theatres. Its polished surface makes this universal system a real eye-catcher. Thanks to its extensive range of standard system lengths, corners, circles and accessories, this system is extremely versatile and offers endless design possibilities. The production of this truss system is monitored by TÜV. The load table as a basis for calculation can be downloaded from the Internet before purchase! Please note: This truss system must never be combined with other systems!
Global Truss F32 3-way corner C31 H
€182.00
card.manufacturer:
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F43 350cm
€463.00
card.manufacturer:
The F43 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 40cm. This system is used to realise individual sections as well as more complex structures with higher loads. This truss system is designed for a span of up to 18 metres. The F43 truss is made of 50x2mm chord tubes and 25x3mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F24 5-way corner T55
€350.00
card.manufacturer:
The F24 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F24 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
Global Truss F32 2-way corner C20 60° V
€136.00
card.manufacturer:
The F32 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 29cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Small cantilevers and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F32 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F42 400cm
€259.00
card.manufacturer:
The F42 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 40cm. This system is ideal for realising composite constructions as a grid ceiling for exhibition stands and permanent installations. Overhangs and cross-sections with low loads are also possible. Spans of up to 10 metres are possible in the grid system. The F42 truss is made of 50x2mm chord tubes and 25x3mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.