Truss
Global Truss F34 3-way corner T35
€319.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Alutruss DECOLOCK DQ4-500 4-point traverse
€139.50
card.manufacturer:
DECOLOCK DQ4 4-point truss systemThe DECOLOCK DQ4 system is a 4-point truss system made of aluminium, which is connected via four conical connectors, pins and cotter pins.The advantage of conical connectors is that they form a positive and non-positive connection with the chord tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables quick, efficient and visually appealing assembly with frequent assembly and disassembly. The four chord tubes are made of 35 mm aluminium tube with 2 mm wall thickness and offer sufficient load-bearing capacity with a low dead weight. The struts have a diameter of 10 mm with a wall thickness of 2 mm and give the system a decorative appearance.DECOLOCK can be used to create compact installations with a low dead weight, e.g. for use in shop windows, shop decorations, exhibitions, interior design, trade fair stands, shop fitting, discotheques and theatres.DECOLOCK is primarily designed for decorative installations, but its aesthetic appearance makes it suitable for both temporary and permanent structures. The advantages of this system are its compact design with 220 mm external dimensions, low weight, optimum strength and quick and easy installation. The documentation for this truss system is closely based on the SQ P1 truss standard published by the VPLT. The load table as a basis for calculation can be downloaded from the Internet before purchase! Please note: This truss system must never be combined with other systems!
Global Truss F22 50cm
€51.00
card.manufacturer:
The F22 truss is a decorative truss, suitable for shop and exhibition stand construction, advertising etc. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application are exhibition stand construction, shop fitting and advertising.
Global Truss F23 3-way corner T39
€202.00
card.manufacturer:
The F23 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F23 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Global Truss F24 4-way corner T40
€239.00
card.manufacturer:
The F24 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F24 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
Global Truss F44 2-way corner C23 135°
€368.00
card.manufacturer:
The F44 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 40cm. The F44 offers outstanding load-bearing properties and low deflection. This truss is used for structures with high loads, larger stage systems or fixed installations. This truss system is designed for spans of up to 20 metres. The F44 truss is made of 50x2mm chord tubes and 25x3mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F22 Circle piece for Ø 7.0m 45° H
€232.00
card.manufacturer:
The F22 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 22 cm. This system is ideal for realising smaller constructions with low loads as a grid ceiling for exhibition stands and permanent installations. Spans of up to 7 metres are possible in the grid system. The F22 truss is made of 35x1.6 mm chord tubes and 8 mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F32 T42 V
€189.00
card.manufacturer:
F32T42V (3-way, 90°) The F32 truss can be mounted both horizontally and vertically. The main areas of application are for event technology, trade fair and shop construction, or for horizontal installation in low rooms. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time.
Global Truss F24 4-way corner C41
€273.00
card.manufacturer:
The F24 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F24 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. An additional end frame increases the stability of the truss. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, these can also be powder-coated in any colour.
Global Truss F24 300cm
€293.00
card.manufacturer:
The F24 truss from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 4-point truss system is ideal for space-saving transport.
Global Truss F22 Circle piece for Ø 6.0m 60° V
€219.90
card.manufacturer:
The F22 truss system from Global Truss is a TÜV-certified 2-point system with an external dimension of 22 cm. This system is ideal for realising smaller constructions with low loads as a grid ceiling for exhibition stands and permanent installations. Spans of up to 7 metres are possible in the grid system. The F22 truss is made of 35x1.6 mm chord tubes and 8 mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Alutruss DECOLOCK DQ3-PAC20 2-way corner 60°
€219.00
card.manufacturer:
DECOLOCK DQ3 3-point truss systemThe DECOLOCK DQ3 system is a 3-point truss system made of aluminium, which is connected via three conical connectors, pins and split pins.The advantage of conical connectors is that they form a positive and non-positive connection with the chord tube and therefore guarantee maximum load-bearing capacity. The Quick-Lock system enables fast, efficient and visually appealing assembly with frequent assembly and disassembly. 35 mm aluminium tubing with 2 mm wall thickness is used for the three chord tubes, offering sufficient load-bearing capacity with a low dead weight. The struts have a diameter of 10 mm with 2 mm wall thickness and give the system a decorative appearance.DECOLOCK can be used to create compact installations with a low dead weight, e.g. for use in shop windows, shop decorations, exhibitions, interior design, exhibition stands, shop fitting, discotheques and theatres.DECOLOCK is primarily designed for decorative installations, but its aesthetic appearance makes it suitable for both temporary and permanent structures. The advantages of this system are its compact design with external dimensions of 220 or 195 mm, low weight, optimum strength and quick and easy installation. The documentation for this truss system is closely based on the SQ P1 truss standard published by the VPLT. The load table as a basis for calculation can be downloaded from the Internet before purchase! Please note: This truss system must never be combined with other systems!
Global Truss F33 150cm stage black
€199.00
card.manufacturer:
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres. The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F24 50cm
€133.00
card.manufacturer:
The F24 truss from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 4-point truss system is ideal for space-saving transport.
Global Truss F44 350cm
€611.00
card.manufacturer:
The F44 truss from Global Truss can be mounted both horizontally and vertically. The main areas of application are event technology, trade fair construction, theatre technology and stage construction. The truss system is suitable for horizontal installation at low room heights and is compatible with Eurotruss FD44.
Global Truss F23 circle piece for Ø 7.0m 60°
€407.00
card.manufacturer:
The F23 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 22cm. It is used to realise small exhibition stands, banner frames and also ceiling structures for mounting lighting and sound systems. This system is also often used in shop fitting. Spans of up to 10 metres are possible. The F23 truss is manufactured with 35x1.6mm chord tubes and 8mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Global Truss F33 100cm
€132.00
card.manufacturer:
The F33 truss system from Global Truss is a TÜV-certified 3-point system with an external dimension of 29cm. Due to its shape, it offers the best ratio of transport volume to load capacity within the F3x series. The trusses in the F33 series are ideal for realising exhibition stands and banner frames. They are also popular for permanent installations. This system is designed for a span of up to 18 metres.The F33 truss is made of 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected with conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this one can also be powder-coated in any colour.
Global Truss F34 4-way corner T40 stage black
€459.00
card.manufacturer:
The F34 truss system from Global Truss is a TÜV-certified 4-point system with an external dimension of 29 cm. Due to its ideal load capacity in relation to its own weight and external dimensions, this truss is one of the most popular systems on the market. The trusses in this series are suitable for trade fair and shop construction, as well as trusses for stage roofs and other outdoor applications. This truss system is designed for spans of up to 18 metres. The F34 truss is manufactured with 50x2mm chord tubes and 20x2mm diagonal bracings made of aluminium. The trusses are connected using conical connectors, which are included in the scope of delivery. Like all Global Truss trusses, this truss can also be powder-coated in any colour.
Global Truss F34 40cm
€143.00
card.manufacturer:
The F34 lifting beam offers optimum load capacity and is characterised by its low transport volume and lightweight construction. This truss is available powder-coated or in a high-gloss (hand-polished) finish with a corresponding delivery time. The main areas of application for the F34 truss are event technology, trade fair construction and shop fitting.
Global Truss F23 3-way corner T36
€189.00
card.manufacturer:
The 3-way corner from Global Truss is a decorative truss, suitable for shop and trade fair construction, advertising, etc. The truss is available powder-coated in many different colours with a corresponding delivery time. The 3-point truss system is ideal for space-saving transport. Conical connectors are included in the scope of delivery.