Guitar/Bass

The 1210S provides the necessary bass foundation even in cramped clubs. The slim design is ideal for placing a small top on top. This ultra-compact speaker with a 1 x 12"/ 1x10" configuration delivers impressive low bass and rich sound pressure despite its small volume, and it weighs just 22 kg. The 10" speaker gives the 1210S the much-loved lively upper mids with a rich attack.The cabinet is specially calibrated due to its small dimensions, so that the heavy-duty speakers guarantee a detailed reproduction of all nuances. By using a voice coil with windings on the inside and outside of the coil former, we achieve a 40% higher continuous power handling of our speakers. Even at the highest levels, they provide a distortion-free, clean sound image, with sound pressure levels that far exceed club applications.With its unique combination of three different tweeters, the 1210S offers unprecedented flexibility when it comes to transmitting the overtone range of a bass guitar. The CT1 4" cone tweeter reproduces the overtones in a finely detailed and open manner. The 1" NT1 neodymium tweeter brings out the dense, crisp highs of a bass and the PT1 piezo horn is responsible for the top highlights. The control panel on the top right-hand side panel offers the option of fine-tuning the "triple tweeter system". For each of the three tweeters there is a switch with the functions "OFF"/"HALF"/"FULL". All switches can be freely combined here so that you can set your own overtone range at any time. Hard rock settings, soft fretless and fusion sounds, ultra-hot slap sounds as well as vintage and plec sounds are reproduced more than impressively. The 1210S is "the" all-round cabinet par excellence.For optimum damping and the elimination of unwanted resonances, the cabinet is equipped with no less than 8 braces and nubbed foam.With a power handling capacity of 600 watts, the 1210S is a robust tool with first-class sound and maximum practical value.The available impedances of 4 or 8 ohms, the strain relief for the guitar cable in the left handle, the amp fixing, which offers the amps from the T series with their "magnet fix pins" an excellent, secure hold.

D Addario NW028 nickel wound single stringD Addario 028 wound, singleNickel wound string for electric guitarGauge: 028 (711mm)can be used as d stringMade in the USA.

Ibanez GSR 200 BK BlackNeck: GSR4Neck-Body-Transition: Bolt-OnNeck material: MapleNeck finish: Satin polyurethaneNeck thickness 1st fret (mm): 21Neck thickness 12th fret (mm): 22Scale length (mm): 864Neck width nut (mm): 41Neck width end (mm): 62Number of frets: 22Fingerboard: JatobaFretboard radius (mm): 305Frets: MediumInlay: White DotBody: PoplarFinish: Gloss PolyurethaneBridge: B10String spacing (mm): 19Nut: PlasticTuning machines: IbanezColour hardware: ChromeActive EQ: Phat II EQSwitching: 2 Vol., 1 Tone, Phat IISaitenstärke: .045/.065/.085/.105Tuning ex works: 1G,2D,3A,4EMade in: IndonesiaFurther included products: Hex keyPU bridge: Dynamix JPU neck: Dynamix P

Digital wireless all-in-one instrument set for guitarists with CI 1 connection cable for instruments.

The Classical Capo Pro was specially designed for classical concert guitars. With the patented micrometre adjustment mechanism, the musician can precisely set the required tension for clean intonation without having to exert excessive force on the neck. This means that the guitar does not need to be retuned before and after capo use. The slim design can cope with even the most demanding performance or tour programme and, thanks to the aluminium construction, hardly makes the instrument any heavier or bulkier.The D'Addario capos are the result of the ongoing collaboration between the famous product designer Ned Steinberger, Jim D'Addario and the D'Addario Accessories team.

The M1 is available in a completely passive design and delivers professional pickup in minutes. The adjustable polepieces provide string-to-string balance and the 1/8" jack makes removing the pickup a breeze when you're in the studio. Install the pickup with the strapjack or use the included 3 metre soundhole cable to avoid making any changes to your valuable instrument.

The VT series from Vox are incredibly versatile modelling amps that offer you a large and high-quality selection of different amp models and factory presets. The footswitch is essential so that you remain flexible and can switch between the presets without interrupting your playing flow because you have to press the corresponding button first.

Super Long Scale Slinky bass strings stand for a clear, balanced tone and are made for basses with a 35" scale. The string length is 53" with a taper at 38 1/4". Each one is made in the beautiful Coachella Valley in Southern California from the finest and freshest raw materials.

The LITTLE LEHLE III - the universal Lehle tool for switching and looping.Within a signal chain, you can use the LITTLE LEHLE III to quickly remove effect pedals from the signal path or tap a signal at any point in the signal chain, e.g. to switch to a tuner.It can also be used as a switch between two instruments to one amp or vice versa from one instrument to two amps. The sound sources can be very versatile: signals from pickups, microphones, even line-outs from keyboards are routed loss-free to the desired amplifier or recorder. All jack sockets are stereo for this purpose, and balanced signals can also be transmitted. A new feature is the ability to combine mono and stereo signals. Effects units with mono input and stereo output can be integrated into the signal path of the LITTLE LEHLE III without restriction.The LEHLE switch works with a microcontroller and an intelligent true bypass relay circuit with active switchover click suppression. It therefore switches the LITTLE LEHLE III faster than mechanical switches and is also wear-free and noiseless. The mushroom-shaped soft-touch button, which is characteristic of LEHLE products, is mounted in the housing so that it moves smoothly, which means that the force of your foot pressure is only transmitted indirectly by a spring. The circuit board is therefore not exposed to any mechanical stress, which makes the LITTLE LEHLE III virtually indestructible and gives it a long service life.Not only the stereo signal is switched, but also the signal ground. This prevents hum loops from occurring when switching between two amps and when managing effect loops.New to the LITTLE LEHLE III are the three operating modes, which allow the footswitch to function either as a switch (latching) or as a momentary switch to produce short-term or rhythmic stutter effects. The third mode offers a mixture of operating modes one and two: a short press is a switch, a long press is a momentary switch.So there are no limits to your creative potential.

EBS Stanley Clarke Preamp2-channel analogue preamp (A/B or A+B):Inputs with 10 Mohm impedance (both channels)Individual high pass/notch filter for each channelXLR microphone input with phantom power (channel B)Support for electret pickups (channel A) Tuner outputEffects loop (serial/parallel)Balanced output (with speaker simulator and ground lift)Aux input and headphone output in professional qualitySpecial 9V DC power supply included in the scope of delivery

The guitars in our KG-6000 series are manufactured entirely in Europe. The experience of three generations of guitar making guarantees flawless workmanship and good playability. All the woods used are carefully dried and special emphasis is placed on sustainability during production.The solid spruce or cedar tops in combination with walnut sides and backs not only ensure a powerful and well-projected sound, but are also a feast for the eyes. These guitars are particularly suitable for guitar students and are available in all major sizes (½, ¾, 7/8 and 4/4) - so there is a suitable instrument for every size and age!

The Stage-Lâg preamp, which is integrated into the OC88CE, emphasises the precise sound of this model. The classical guitar gets its acoustic sharpness and honesty primarily from the solid Engelmann spruce top.