The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and is supplied with an ideally matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) base and the 10 mm padding offer perfect protection with easy transport. The RockBoard pedalboard series has been completely designed to create a pedalboard that is light, rigid and robust and above all allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on a single cold-rolled aluminium sheet and has not a single weld seam. This provides an absolutely flat surface that can be fully utilised. U-shaped vertical braces give the board additional stability without making it noticeably heavier, making it completely torsionally rigid and preventing it from bending under maximum load. The innovative slot design works with standard mounting solutions or, perfectly, with our RockBoard QuickMount system. The slots also make it easy to route cables under the board surface for a clean build. Almost all common power supplies can be mounted either directly under the board surface or with our optionally available The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with the RockBoard All-in-One PatchBays, which are a useful addition to any RockBoard.
The Power MOD ISO DC 1 is a multi power supply unit for effect pedals and offers up to 9 galvanically isolated, elaborately filtered 9 VDC power connections and a 5 V USB connection. The multi power supply is designed to supply up to 9 effect pedals with power simultaneously without generating background noise. Sophisticated filter technology effectively eliminates high-frequency interference. Separate short-circuit protection for each output protects the connected effects pedals from damage in the event of a short circuit. Independently operating LEDs signal the correct status of the connection at each output. In the event of a short circuit, only the affected output is switched off, the rest of the effect pedals remain operational.
The RockBoard ISO Power Block 12 IEC is a multi power supply unit for effects pedals and offers 12 galvanically isolated, highly filtered power connections and a 5V USB connection. The multi power supply was developed to supply up to 12 effect pedals, even with different operating voltages, with power simultaneously and silently. The advanced filter technology effectively prevents high-frequency background noise. The separate short-circuit protection protects the connected effect pedals from damage in the event of a short circuit. Separate LEDs indicate short circuits for each individual connection. If a short circuit occurs, only the affected output is switched off, so that the smooth operation of the remaining connections is still guaranteed.
The RockBoard RBO B 4.2 QUAD B pedalboard offers space for approx. 9 to 15 pedals (depending on the size of the pedals) and is supplied with an ideally matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) base and the 10 mm padding offer perfect protection with easy transport. The RockBoard pedalboard series has been completely designed to create a pedalboard that is light, rigid and robust and above all allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on a single cold-rolled aluminium sheet and has not a single weld seam. This provides an absolutely flat surface that can be fully utilised. U-shaped vertical braces give the board additional stability without making it noticeably heavier, making it completely torsionally rigid and preventing it from bending under maximum load. The innovative slot design works with standard mounting solutions or, perfectly, with our RockBoard QuickMount system. The slots also make it easy to route cables under the board surface for a clean build. Almost all common power supplies can be mounted either directly under the board surface or with our optionally available The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with the RockBoard All-in-One PatchBays, which are a useful addition to any RockBoard.
Fender Contour™ Series instrument cables are indestructible, durable and look good with their stylish Fender design. Sturdy spiral shielding and nickel-plated plugs ensure interference-free, clean signal transmission on stage and in the studio.
The D'Addario Auto Lock guitar strap with integrated safety lock ensures a secure hold during your performance. Simply slide the end of the strap over the strap pin on your guitar and you're ready to rock the stage. This way, the end automatically locks into the strap pin and can withstand any performance, no matter how wild. The Auto Lock guitar strap was developed in collaboration with Ned Steinberger. The straps can be adjusted to any length from 76 - 140 cm.
The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and is supplied with an ideally matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) base and the 10 mm padding offer perfect protection with easy transport. The RockBoard pedalboard series has been completely designed to create a pedalboard that is light, rigid and robust and above all allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on a single cold-rolled aluminium sheet and has not a single weld seam. This provides an absolutely flat surface that can be fully utilised. U-shaped vertical braces give the board additional stability without making it noticeably heavier, making it completely torsionally rigid and preventing it from bending under maximum load. The innovative slot design works with standard mounting solutions or, perfectly, with our RockBoard QuickMount system. The slots also make it easy to route cables under the board surface for a clean build. Almost all common power supplies can be mounted either directly under the board surface or with our optionally available The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with the RockBoard All-in-One PatchBays, which are a useful addition to any RockBoard.
Single-coil pickup with a lot of power. Hand-polished 1/4" polepieces and lots of coil windings ensure maximum output and a balanced frequency response with extra punchy mids. Produces more sustain than the Vintage (SJAG-1) and Hot (SJAG-2) models. Ideal for blues, classic rock, garage, heavy rock, classic metal and nu-metal.
The RockBoard PedalSafe system is designed to keep effects pedals safe, clean and in pristine condition. The flexible PedalSafe Type J protective cover and universal pedal mounting plate fit medium size Strymon effects pedals. You can see the settings through the crystal-clear pedal cover, but they are optimally protected against unintentional adjustment by the cover. The set includes the protective cover (PedalSafe) and the universal mounting plate. The RockBoard Universal Pedal Mounting Plate was developed to securely mount effects pedals with the PedalSafe system on almost all pedalboards that do not have the innovative RockBoard Slot Grid. The mounting plates can be screwed onto the back of the pedals using the original screws (or the supplied replacement screws) and easily removed without leaving any residue.
Fender Contour™ Series instrument cables are indestructible, durable and look good with their stylish Fender design. Sturdy spiral shielding and nickel-plated plugs ensure interference-free, clean signal transmission on stage and in the studio.
The latest evolution in noiseless pickup design! We made the Custom ML Ultra Noiseless Single-Coil Strat® pickups exactly to Michael Landau's specifications. They are wound in such a way that they can produce sparkling clear highs, crisp and powerful mids and full lows. This is exactly how we know and love the original sound of Michael's legendary modded and hotly crafted Stratocaster. Alnico 5 magnets with polysol wire produce a bell-like vintage tone, but without any annoying mains hum.
Description:The LEHLE P-SPLIT STEREO stands for passive intelligent splitting with maximum signal fidelity in a double pack.The classic solution for splitting, eliminating hum, balancing and reamping in recording applications is now available in two versions, and passive summing of signals is a new addition.The application possibilities are endless. Make the most of them.At the heart of the LEHLE P-SPLIT STEREO, two LEHLE TRANSFORMER HZs do their job and galvanically isolate the respective ISO outputs from each other, allowing you to successfully avoid ground loops and hum. The LEHLE TRANSFORMER HZ process high-impedance and low-impedance signals with uncompromising sound quality. You can tap the signal at the ISO outputs either asymmetrically or symmetrically - regardless of the signal type in the rest of the system.There are gold-plated phase reversal switches and ground switches for each channel. This keeps you flexible and your system safe.A classic application is isolating a stereo signal so that you can use two amplifiers in stereo and simultaneously send the stereo signal to a mixing console or the audio interface of your DAW.The LEHLE P-SPLIT STEREO is another useful method for effectively eliminating unwanted humming noises. If you connect two electronic devices, background noise caused by ground loops can occur. The LEHLE P-SPLIT STEREO offers a simple but extremely effective solution: By connecting the problem solver between the two devices, you isolate the input from the output.The signals at the ISO outputs can be tapped symmetrically, making the LEHLE P-SPLIT STEREO an excellent choice as a high-quality, compact stereo DI box for active signal types of all kinds. In the studio or on stage, you can therefore bridge many metres symmetrically and free of background noise.Depending on which sockets you assign, it works as a passive summing unit, for example, so that your effects board can remain wired in stereo even though you only connect an amplifier in mono. If, on the other hand, you only connect one input signal in mono, the LEHLE P-SPLIT STEREO works as a triple splitter for up to 3 amplifiers at the outputs.Galvanically isolated, double hum-free and passively intelligent.Speaking of passive: the LEHLE P-SPLIT STEREO still requires no power supply.
Fender Contour™ Series instrument cables are indestructible, durable and look good with their stylish Fender design. Sturdy spiral shielding and nickel-plated plugs ensure interference-free, clean signal transmission on stage and in the studio.