Fender Contour™ Series instrument cables are indestructible, durable and look good with their stylish Fender design. Sturdy spiral shielding and nickel-plated plugs ensure interference-free, clean signal transmission on stage and in the studio.
The 351 celluloid pick is one of the most popular picks of all time. Here it comes in a smart version: with non-slip knobs on both sides. You play the classic warm attack, but have a much better grip than with the smooth version, especially with sweaty hands. Suitable for all styles and playing techniques.
The RockBoard ISO Power Block 9 IEC is a multi power supply unit for effects pedals and offers 9 galvanically isolated, highly filtered power connections and a 5V USB connection. The multi power supply was developed to supply up to 9 effect pedals, even with different operating voltages, with power simultaneously and silently. The advanced filter technology effectively prevents high-frequency background noise. The separate short-circuit protection protects the connected effect pedals from damage in the event of a short circuit. Separate LEDs indicate short circuits for each individual connection. If a short circuit occurs, only the affected output is switched off, so that the smooth operation of the remaining connections is still guaranteed.
The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and is supplied with an ideally matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) base and the 10 mm padding offer perfect protection with easy transport. The RockBoard pedalboard series has been completely designed to create a pedalboard that is light, rigid and robust and above all allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on a single cold-rolled aluminium sheet and has not a single weld seam. This provides an absolutely flat surface that can be fully utilised. U-shaped vertical braces give the board additional stability without making it noticeably heavier, making it completely torsionally rigid and preventing it from bending under maximum load. The innovative slot design works with standard mounting solutions or, perfectly, with our RockBoard QuickMount system. The slots also make it easy to route cables under the board surface for a clean build. Almost all common power supplies can be mounted either directly under the board surface or with our optionally available The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with the RockBoard All-in-One PatchBays, which are a useful addition to any RockBoard.
Fender Contour™ Series instrument cables are indestructible, durable and look good with their stylish Fender design. Sturdy spiral shielding and nickel-plated plugs ensure interference-free, clean signal transmission on stage and in the studio.
The D'Addario Auto Lock guitar strap with integrated safety lock ensures a secure hold during your performance. Simply slide the end of the strap over the strap pin on your guitar and you're ready to rock the stage. This way, the end automatically locks into the strap pin and can withstand any performance, no matter how wild. The Auto Lock guitar strap was developed in collaboration with Ned Steinberger. The straps can be adjusted to any length from 76 - 140 cm.
Similar to a '59 model, but with a richer low bass range and more power. The SH-14 was developed by our internet user group. They replaced the ceramic and AlNico 2 magnets of the SH-5 Custom and SH-11 Custom with magnets made of AlNico 5 material. If you compare it with the SH-5 and SH-11, the SH-14 has more of a vintage sound, less distortion, but still plenty of strength and power in the tone. Undistorted, it sounds warm and full, with a splash of additional presence. The precise alignment of the trembucker's magnetic poles improves the balance between the strings to achieve a consistent, modern sound even with Floyd Rose or similar vibrato systems. Ideal for pop, country, blues, classic rock and heavy rock.
Mooer Micro Power 8-ports power supply unitCentral power supply for effect pedals8 x 9V DC outputs, each with max. 300 mA12V DC inputStatus LED for each outputIncl. 12V DC power supply unitIncl. 8 x connection cablesIncl. velcro matDimensions: 93.5 mm (L) x 42 mm (W) x 52 mm (H)Weight: 160 g4-year W-Music Distribution guarantee (product registration required)
The patented design eliminates hum and preserves the classic sound. The revolutionary design reliably eliminates the dreaded 50Hz hum. The great classic Strat® sound is retained. Ideal for country, pop, surf, rockabilly, blues, ska and classic rock.
Strymon Ojai-R30 Expansion KitMulti-power supply for expansion with other Strymon systems3x fully isolated 9 V DC / 500 mA outputs2x fully isolated 9 V DC 500 mA, 12 V DC 375 mA or 18 V DC 250 mA24 V Thru socket enables connection to additional Strymon Ojai or Oja R30 (sold separately)Dimensions: 81 x 58 x 33 mmWeight: 130 g5 pedal cables included: 5.5 x 2.1 mm coaxial connector - negative pole inside, angled to straight plugmade in USAwithout power adapter
TriplePlay is a groundbreaking new development in the field of guitar signal transmission. As a tool for composition, recording and live applications, the system offers you an almost unlimited palette of sounds and instruments, playable via your electric guitar! The TriplePlay transmitter unit (with hexaphonic pickup) transmits the pickup/synth/mix signal wirelessly to the TriplePlay USB receiver. The included software allows you to simulate virtual instruments and other sound generators, and installation on the electric guitar is quick and easy.
The invisible, lockable zero position for every spring chamber tremolo. A small spring mechanism ensures that the block of the tremolo always rests against a stop bolt. However, this stop can be "pushed away" by overcoming the adjustable spring force of the return spring. This allows tremolos to be tremolised both upwards and downwards. Extremely simple installation (2 screws) in the tremolo compartment between 2 springs.
The RockBoard® MOD 5 Cab SIM + DI Patchbay offers selectable, IR-based stereo speaker simulation, an active DI box, and a simple solution to organise all connections to and from your effects setup. Whether you're using a RockBoard® or another brand of pedalboard, the MOD 5 opens up a whole new world of possibilities. With speaker cab simulation and DI, you can get started right away and have YOUR sound ready, no matter what backline is available at the venue. Want to use your personal favourite cabinet? No problem, load an Impulse Response of the sound into the MOD 5 and you have it with you wherever you go. The patchbay section is used to route connections from underneath your pedalboard to the front to give you a central access point to your setup and tidy up your cable clutter. For silent practice on the road, the MOD 5 also features a headphone amplifier with adjustable output volume.
Strymon Power Adapter EIAJ Cable 92cm92cm long connection cable, for connecting the Ojai power supply to another Ojai or Zuma as well as to the PS-124 Power BlockPlug: 1x straight and 1x right-angled
The ENKI AMG-2 3rd Gen is a revolutionary case for 2 electric guitars that offers solid, flight-proof protection and travelling comfort for touring musicians. Most touring guitarists carry multiple guitars and need a case that offers a high level of protection and the ability to easily roll the case to the venue. The ENKI AMG-2 3rd Gen Guitar Case is made from an incredibly strong, lightweight Roto-Moulded polyethylene shell surrounded by a luxurious EVA liner for 2 guitars. The AMG-2 3rd Gen guitar case is designed to fit most types of electric guitars with a body width of up to 13 3/8" or 340 mm. Guitars can be accessed both horizontally and vertically with a single latch. The AMG-2 3rd Gen guitar case not only provides excellent protection, but can also be used as a guitar stand when upright - perfect for the stage!
The RockBoard RBO B 4.4 QUAD B pedalboard offers space for approx. 9 to 18 pedals (depending on the size of the pedals) and is supplied with an ideally matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) base and the 10 mm padding offer perfect protection with easy transport.The RockBoard pedalboard series has been completely designed to create a pedalboard that is light, rigid and robust and above all allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on a single cold-rolled aluminium sheet and has not a single weld seam. This provides an absolutely flat surface that can be fully utilised. U-shaped vertical braces give the board additional stability without making it noticeably heavier, making it completely torsionally rigid and preventing it from bending under maximum load. The innovative slot design works with standard mounting solutions or, perfectly, with our RockBoard QuickMount system. The slots also make it easy to route cables under the board surface for a clean build. Almost all common power supplies can be mounted either directly under the board surface or with our optionally available The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with the RockBoard All-in-One PatchBays, which are a useful addition to any RockBoard.
The Quick Change series from Kyser enables the capo to be clamped and moved to a different position with one hand. The spring tension eliminates the need for tedious adjustment.