Monitoring

The Sub8 is a powerful active subwoofer with small dimensions that extends the playback range to below 30 Hz and can be customised in many ways to suit the acoustic conditions.It contains a special long-throw 8.5" chassis, which is driven by a powerful magnet and a 38 mm voice coil. ICE modules are used as amplifiers, which combine high performance with minimal heat generation and can easily cope with high loads over long periods of time.There are control options for volume (-60 to +6 dB) and phase switching (180°). Furthermore, the upper cut-off frequency of the subwoofer can be variably adjusted (50 - 150 Hz). A filter can be switched on for the satellite outputs, which blocks the signals from the satellites below 85 Hz, for example to reproduce a film soundtrack in accordance with Dolby® and relieve them of the low frequencies. It is also possible to either switch the subwoofer on or off manually or have it switch on automatically as soon as it receives signals (signal-on/continuous).The remote control supplied allows these controls to be set conveniently from the listening position.

The KH 310 is designed for use as a nearfield monitor and as a front speaker in medium-sized or rear speakers in large multi-channel systems. It is ideally suited for use in project, music and post-production studios, broadcast control centres and OB vans for multitrack recording, mixing and mastering. The active 3-way studio monitor KH 310 is characterised by a Mathematically Modeled DispersionT Waveguide (MMDT), universal acoustic controls, multiple input options and a wide range of mounting hardware. The speaker offers maximum flexibility in dealing with a wide range of acoustic conditions, source devices and installation locations. The KH 310 represents the state of the art in acoustic and electronic simulation and measurement technologies and guarantees maximum sonic precision.

Set the Scene:The DM-50D-BT speakers deliver a balanced, powerful bass sound and are equipped with plenty of power reserves thanks to Class D amplifiers and 5-inch woofers. Press the switch to switch from DJ mode to production mode and the DSP settings are automatically adjusted to achieve the best sound for each application.2 sound modes - optimised for DJ-ing and music production:You don't have to decide whether you want a monitor set that's best for DJing or for making music and producing: the DM-50D speakers are perfect for both. Simply flip the switch to select either DJ mode or production mode and the DSP settings will be optimised for the task, allowing you to focus on what's at hand.Easy to combine with various DJ or production equipment:With RCA, mini jack and the now additional jack inputs, you can connect different types of equipment such as DJ controllers and mixers, the laptop or the sound card you're using. You can easily and conveniently connect your headphones via the socket on the front of the DM-50D, and the volume control is also located there so that you can quickly adjust the level at any time.Bluetooth® integrated:The Bluetooth® technology included in the DM-50D-BT and DM-40D-BT models allows you to easily pair your smartphone, mobile device or PC/Mac and play your tracks wirelessly in high quality.

ARC Studio is a standalone room correction solution for stereo monitoring systems, It combines a hardware processor, the ARC 4 software and a precise MEMS Measurement microphone. The completely new algorithm corrects unfavourable acoustic conditions that could otherwise lead to an incorrect mix.The system thus enables a natural and transparent sound that guarantees reproducible results.The quality of the monitoring path is crucial. ARC Studio offers a dynamic range of 120 dB(A) between analogue input and output, a frequency response of 0.5Hz to 40kHz and ultra-stable clocking for infinitesimally low jitter. This ensures sonic transparency and accuracy that can only be found in professional audio interfaces and mastering-grade audio converters Mastering-grade audio converters.The connection to studio monitors is made via balanced XLR connectors, which are equipped with relay-based hard bypass to prevent unwanted background noise.

Set the Scene:The DM-40D-BT speakers deliver a balanced, powerful bass sound and are equipped with plenty of power reserves thanks to Class D amplifiers and 4-inch woofers. Press the switch to switch from DJ mode to production mode and the DSP settings are automatically adjusted to achieve the best sound for each application.2 sound modes - optimised for DJ-ing and music production:You don't have to decide whether you want a monitor set that's best for DJing or for making music and producing: the DM-40D speakers are perfect for both. Simply flip the switch to select either DJ mode or production mode and the DSP settings will be optimised for the task, allowing you to focus on what's at hand.Easy to combine with various DJ or production equipment:With RCA, mini jack and the now additional jack inputs, you can connect different types of equipment such as DJ controllers and mixers, the laptop or the sound card you're using. You can easily and conveniently connect your headphones via the socket on the front of the DM-40D, and the volume control is also located there so that you can quickly adjust the level at any time.Bluetooth® integrated:The Bluetooth® technology included in the DM-50D-BT and DM-40D-BT models allows you to easily pair your smartphone, mobile device or PC/Mac and play your tracks wirelessly in high quality.

It is worth mentioning that the DSP, which uses a high-quality A/D converter from BurrBrown, only filters the woofer of the subwoofer. The signal path for the satellite speakers remains purely analogue and undergoes no A/D, D/A conversion. With the "Pure Satellite" function, when activated, the subwoofer and the DSP filter section are bypassed completely. In this case, the satellite signals are routed unfiltered to the outputs and only the volume of the satellites can be varied.The volume of the subwoofer and the entire stereo system can be controlled using the remote control supplied as standard with the subwoofer - all from the comfort of your listening position.The special feature of our extremely powerful and high-precision subwoofers is the passive cone used, which replaces the usual bass reflex channel. This design completely eliminates disturbing flow noise caused by air turbulence. Audible tube resonances (with lambda/2 + multiples) are due to the principle of an open tube on both sides (bass reflex channel) and can be eliminated with the passive membrane design in all EVE Audio subwoofers. Furthermore, the suspension of the passive cone has a restoring force below the tuning frequency, which reduces inaudible subsonic excursions. This means less excursion in the operating range and thus reduced intermodulation distortion.A passive diaphragm enables a particularly low tuning or lower cut-off frequency in a compact housing.

In recent years, the audio industry has produced a large number of new, high-quality multi-channel audio formats, which place considerably higher demands on the professional production environment in the studio. The Blu-ray format, for example, makes it possible to store an increased number of discrete audio channels with high resolution (7.1). To meet these requirements, Neumann has created a 7.1 High Definition Bass Manager with the newly developed electronics of the KH 810, which fulfils all studio requirements from mono to the latest 7.1 HD formats. With eight analogue input channels, flexible connection is guaranteed in the modern studio environment. Four switchable LFE modes guarantee compatibility with all formats and industry standards. Extensive acoustic adaptation options and a frequency separation of 24 dB/oct allow optimum integration into the existing studio acoustics. The built-in 8-channel volume control in conjunction with the optionally available wired remote control can be used to realise source-independent central system control. The electronics of the KH 810 can be detached in order to adapt the cabling flexibly. The latest amplifier technology and extensive research and optimisation of the speaker chassis used have resulted in the highest degree of bass precision and sound neutrality. The low-resonance cabinet and the flow-optimised bass reflex channels ensure dry and extremely low-distortion bass reproduction down to 18 Hz, even at high levels. Multisubwoofer systems can easily be set up using the sum output of the electronics. This allows speaker arrangements such as Plane Wave Bass Arrays TM (PWBA) to be implemented, which dramatically improve the lateral mode behaviour in the listening room via cylindrical wave generation. The KH 810 was developed as an extension of our extensive range of studio monitors. It can be used alone or in combination with several subwoofers to realise large systems with very high maximum level requirements. The KH 810 is therefore the ideal low-frequency extension for music, broadcasting and post-production for use in tracking, mixing and mastering. It can preferably be positioned close to the wall or, thanks to the bass reflex ports on the front, in the wall and can be freely combined with all our monitors in multi-channel systems.

The KH 310 is designed for use as a nearfield monitor and as a front speaker in medium-sized or rear speakers in large multi-channel systems. It is ideally suited for use in project, music and post-production studios, broadcast control centres and OB vans for multitrack recording, mixing and mastering. The active 3-way studio monitor KH 310 is characterised by a Mathematically Modeled DispersionT Waveguide (MMDT), universal acoustic controls, multiple input options and a wide range of mounting hardware. The speaker offers maximum flexibility in dealing with a wide range of acoustic conditions, source devices and installation locations. The KH 310 represents the state of the art in acoustic and electronic simulation and measurement technologies and guarantees maximum sonic precision.