As a sound engineer, DJ or member of a stage crew, a multifunctional cart is the best means of transport to take the strain off you during set-up and dismantling. The chassis of the Gravity Cart is made of steel and guarantees stability. Low rolling resistance, anti-slip rubber tyres, two of which are fixed and two of which are movable, provide extra manoeuvrability. This makes the Gravity Cart your indispensable helper before and after every show. The best thing about it: as effortlessly as the compactly folded multifunctional cart with its low dead weight can be lifted out of any tour bus, it performs just as convincingly when fully packed with equipment. Its floor space, which can be extended to 0.98 m, and strong 150 kg load capacity will get your equipment off the stage just as quickly and, above all, safely as on it. And without any back pain - thanks to optimum ergonomics.
Creativity knows no boundaries, but space does. The Gravity® FDJT 01 DJ desk is a place where you can unfold without limits. It allows you to keep your set-up compact and always be ready for the moment when inspiration strikes.Your familiar monitors can be placed on the height-adjustable supports, which can be rotated 360° and tilted 15°. Precise positioning and tilting of the speakers is made much easier by a precise scale on the tubes.The laptop sits enthroned as the centrepiece of your setup in the middle of the table and is always securely fixed in place thanks to the sophisticated holder with integrated pins, even when tilted sharply. In addition, both the speaker and laptop supports can be infinitely adjusted to the left and right on the rear rail of the Gravity® FDJT 01 DJ desk.The height of the desk can be adjusted between 680 mm and 1090 mm so that you can optimally adapt it to your height and, with a usable depth of 500 mm and a width of 1190 mm, it offers you enough space to store your equipment. The adjustable levelling feet ensure greater stability and compensate for any unevenness in the floor.
Transport heavy equipment easilyA multifunctional cart is a practical means of transport for you as a sound engineer, DJ or member of a stage crew to take the strain off you during set-up and dismantling.The chassis of the Gravity® Cart L 01 B is made of steel and guarantees stability. Low rolling resistance, anti-slip tyres, two of which are fixed and two of which are movable, provide extra manoeuvrability and are also suitable for higher kerbs or rough terrain thanks to their size. This makes the Gravity Cart your indispensable helper before and after every show. The best thing about it: as effortlessly as the compactly folded multifunctional cart with its low weight can be lifted out of any tour bus, it performs just as convincingly when fully packed with equipment. Its floor space, which can be extended to 1.35 m, and its strong 170 kg load capacity will get your equipment off the stage just as quickly and, above all, just as safely as on it. And without any back pain - thanks to optimum ergonomics.
The MS 23 W is a premium microphone standIN WHITE with a particularly thick tube, black powder coating and a maximum height of 168 cm. The highly stable cast iron disc base has a rubber base for acoustic insulation and to protect the floor space.The handle of the smooth-running, durable height adjustment mechanism of the MS 23 W is made of highly resistant ABS with a non-slip soft-touch thermoplastic cover for comfortable operation. The specially designed lock nut enables the microphone holder to be mounted quickly and securely without tools.The MS 23 W is supplied with an additional set of black coding rings; further rings are available in many colours for clear personalisation.
The MS 4222 B is a premium microphone standwith a particularly thick tube, black powder coating and a maximum height of 74 cm. The highly stable tripod has a die-cast zinc bell and generously dimensioned, precisely fitting steel folding feet with sturdy rubber caps to protect the base.The position and inclination of the telescopic boom can be precisely adjusted on the suspension with 2 clamping screws. It has a quick-release lock and a maximum length of 88 cm for flexible positioning of the microphone. The handle of the smooth-running, durable height adjustment of the MS 4222 B and the screw knobs are made of highly resistant ABS with a non-slip soft-touch thermoplastic coating for comfortable operation. The specially designed lock nut allows the microphone holder to be mounted quickly and securely without tools.The MS 4222 B is supplied with an additional set of black coding rings; further rings are available in many colours for clear personalisation.
On tour and at events, conditions are tough and time pressure is high. Microphone stands are thrown around and not exactly handled gently. The Gravity Touring Series microphone stand with telescopic boom is therefore extremely sturdy. Made of particularly strong tubular steel with three folding feet. The bell and boom holder are made of indestructible die-cast zinc. The boom can be adjusted from 51 cm to 88 cm. The screwed-on counterweight has a specially designed lock nut for microphone clamps. The solid metal knobs are captive so that the stand can withstand the rigours of touring for longer. The microphone stand is also quicker to set up and dismantle. With just a 3/4 turn of the adjusting screw, the boom is locked in place in a flash. Height adjustment is also easy and quick with the handy triangular clamping sleeve.
The BG SS 2 XLB is an extremely robust, 10 mm thick padded carrying bag for two large speaker stands made of water-repellent 600D nylon, which is easy to clean. An equally padded partition wall protects the stands from scratches. The base and all load points are extra reinforced, two carrying straps with a soft Velcro handle and two strong zips with a joint pull ensure easy handling.
The MS 23 is a premium microphone standwith a particularly thick tube, black powder coating and a maximum height of 168 cm. The highly stable cast iron disc base has a rubber base for acoustic insulation and to protect the stand surface.The handle of the MS 23's smooth-running, durable height adjustment mechanism is made of highly resistant ABS with a non-slip soft-touch thermoplastic cover for comfortable operation. The specially designed lock nut enables the microphone holder to be fitted quickly and securely without tools.The MS 23 is supplied with an additional set of black coding rings; further rings are available in many colours for clear personalisation.
This cup holder has an adjustable screw clamp for mounting on microphone stands and tripods with a maximum tube diameter of 35 mm as well as on table tops. It provides a secure hold for bottles, cans, cups and glasses with a diameter of up to 90 mm.
Gravity has developed the TSP 2332 B spacer tube so that you can mount your speakers on your subwoofers as quickly and easily as possible during tough everyday touring.The sturdy construction made of black powder-coated steel can be adjusted in length from 82 to 140 cm using the automatic LockPin® technology developed for the Touring series. This makes assembly and disassembly much quicker, as the height adjustment lock engages automatically when it is pulled up and no additional split pin is required. The Gravity TSP 2332 B has an M20 thread at the lower end of the tube so that you can simply screw it onto your subwoofer.
The MS 4322 W is a premium microphone standIN WHITE with a particularly thick tube, black powder coating and a maximum height of 169 cm. The highly stable tripod has a die-cast zinc bell and generously dimensioned, precisely fitting steel folding feet with sturdy rubber caps to protect the base.The position and inclination of the telescopic boom can be precisely adjusted on the suspension with 2 clamping screws. It has a quick-release lock and a maximum length of 88 cm for flexible positioning of the microphone. The handle of the smooth-running, durable height adjustment of the MS 4322 W and the screw knobs are made of highly resistant ABS with a non-slip soft-touch thermoplastic coating for comfortable operation. In addition, the specially designed lock nut enables the microphone holder to be fitted quickly and securely without tools.
The KSX 2 is a stable, sturdy keyboard standwith double X-support and a load capacity of 65 kg. The height can be easily adjusted up to 90 cm using the quick-release lock. The black powder-coated steel construction has reinforced seams for maximum durability and long-lasting, non-slip end caps.
With the Gravity crossbar, two speakers can be mounted on one stand. It is made of sturdy, black powder-coated steel and fits all tubes with a diameter of 35 mm. The width is adjustable from 31 to 49 cm.
The SP 5211 B is a classic tripod speaker stand made of strongbut lightweight aluminium tubing with a black powder coating, a load capacity of 50 kg and a maximum height of 192 cm.The newly designed, extremely durable suspension of the feet is made of die-cast aluminium, the steel collar of the height adjustment is practically indestructible and provides additional stability. A locking pin locks the 35 mm thick extension tube in place.The ergonomic knobs of the adjusting screws are made of highly resistant ABS with a non-slip soft-touch thermoplastic coating for comfortable operation.The SP 5211 B is supplied with an additional set of black coding rings; further rings are available in many colours for clear personalisation.
