The BGSS 2 B is an extremely robust, 15 mm thick padded carrying bag for 2 speaker stands made of water-repellent 600D nylon, which is easy to clean. A padded partition wall protects the stands from scratches. All load points are extra reinforced, comfortable carrying handles and two strong zips with a joint pull ensure easy handling.
The Cab Clamp enables uncomplicated, absolutely precise alignment of a microphone on all guitar cabinets and combo amps. The spring mechanism can be attached to the side or top of the cabinet with adjustable retaining clips and is even suitable for models with recessed protective grilles. A guide groove in the swivelling microphone arm allows the microphone clamp to be moved along its entire length, and the arm and clamp can be firmly locked in the desired position. The Gravity Cab-Clamp system offers significant advantages over conventional mounting solutions and ensures precise adjustment of the microphone distance and angle.
The BGMS 6 SB is an extremely robust carrying bag for 6 short microphone stands made of water-repellent 600D nylon, which is easy to clean. Padded dividers protect the stands from scratches. The stand side and all load points are extra reinforced, comfortable carrying handles and a strong zip ensure easy handling.
Screw on, strap on and combineThe SA BELT 1 B barrier belt cassette offers you as an event technician, small event organiser or retailer absolute flexibility for zoned barriers, controlled visitor flow or the clarification of walkways.The Gravity® SA BELT 1 B barrier belt cassette can be extended up to two metres and is self-tensioning. The pull-out belt system has a useful snap-in function to ensure that the belt is held securely in place. Any number of barrier cassettes can be combined using the typical three belt clips.With the SA BELT 1 B, there is no need to buy two stands and fill up your storage space unnecessarily, as the cassette itself has an integrated 5/8" thread at the top and bottom. This allows you to simply screw it onto any microphone or speaker stand with a 3/8", 5/8" or M10 thread. And so that you always have the right adapter to hand, the required adapters are included with this sophisticated belt barrier system.With the SA BELT 1 B SET 1, Gravity® offers you a functional system for signalling short and long routes from admission control and stage barriers to product or trade fair presentations. You are ideally prepared for your situational requirements with the practical set of 4 barrier belt cassettes including accessories, which are kept organised in a transport and storage bag.
The MA TRAY 2 is a steel tray that can be aligned as required and can be easily mounted on any microphone stand. With a surface area of 400 x 130 mm, it is perfect for percussion instruments such as shakers or bell rims and other accessories.
The GS 01 NHB is a stable yet elegant guitar standfor acoustic, electric and bass guitars. It can be adjusted in height up to 108 cm and is collapsible. The clever "Neck Hug" mechanism automatically secures the guitar in the neck fork to prevent it from slipping out and opens automatically when the instrument is lifted from the stand. The soft padding protects against scratches and does not damage the paintwork.Not suitable for long-term use on guitars with nitro lacquer.
The SP 5211 is a classic tripod speaker stand made of strong but lightweight aluminium tubing with a black powder coating, a load capacity of 50 kg and a maximum height of 192 cm.The newly designed, extremely durable suspension of the feet is made of die-cast aluminium, the steel collar of the height adjustment is practically indestructible and provides additional stability. A locking pin locks the 35 mm thick extension tube in place.The ergonomic knobs of the adjusting screws are made of highly resistant ABS with a non-slip soft-touch thermoplastic coating for comfortable operation.The SP 5211 is supplied with an additional set of black coding rings; further rings are available in many colours for clear personalisation.
Exact and repeatable arrangements of two microphones for stereo recordings are the speciality of the Gravity Stereo Bar. This true precision instrument enables the exact adjustment of the distance between the movable microphone holders from 6 to 29 cm, the microphone alignment on the horizontal axis by +/- 90° and +/- 90° inclination of the entire bar. Easy-to-read scales for microphone distance, swivelling angle and rail inclination not only ensure quick and precise positioning. They also allow you to easily restore any settings you have made a note of. Adjusting screws with ergonomic soft-touch knobs lock the adjustable parts securely in the desired position.The Gravity stereo bar is suitable for common stereo recording techniques such as ORTF, DIN, XY or AB and can be mounted on any microphone stand. It is precisely and solidly constructed from lightweight aluminium and also supports two large diaphragm microphones.
The NS ORC 1 is a stable, ultra-light adjustable music standmade of black powder-coated steel in the style of an orchestra stand. The angle of inclination of the 50 x 33.5 cm shelf made of lightweight aluminium and the height of the stand are adjusted by friction without the need for screws.
The Gravity® pipe-and-drape system offers an innovative solution for musicians, bands, event technicians, theatres, exhibitors and stand builders to quickly and efficiently structure rooms, separate areas, suspend walls or cordon off walkways. With the PAD SET 2, consisting of the PAD A adapter, the PAD T telescopic pole and the PAD C B 1 Molton curtain, conventional speaker or lighting stands with a 35 mm mount can be transformed into a fully-fledged pipe-and-drape curtain system in no time at all: the PAD A is placed on the stand and the telescopic pole is mounted by inserting the mounting bolts of the pole into the mounting holes of the adapter. The Molton curtain is then attached to the crossbar.The PAD A adapter is made of steel and plastic and has an internal diameter of 36 mm to accommodate a 35 mm stand. The four fixing holes on the top allow up to four PAD T telescopic poles to be fitted. The practical snap-in function for the mounting bolts of the telescopic pole allows the poles to be locked in place quickly, easily and securely.The aluminium PAD T telescopic pole can be extended from 1.90 m to 3.50 m, allowing the width of the system to be individually adjusted. The assembly bolts at both ends of the pole have a tilt joint, which enables simple and flexible assembly without a ladder and without the help of another person. To attach the 3.50 m x 2.55 m PAD C B 1 molleton curtain, the pole is fitted with a Velcro strip across its entire width. The black, flame-retardant curtain is opaque at 320 g/m² and has a total weight of just under 3 kg.The Gravity® pipe-and-drape curtain system offers maximum flexibility and adaptability thanks to its compatibility with conventional 35 mm stands, individual adjustability in width and height, the option of holding up to four telescopic poles per adapter and the ability to set up the system alone and without a ladder. Whether for small events or large trade fairs - this system adapts to your individual requirements.
The LS SUPER TB 01 Super mini T-bar offers a suitable solution to this problem: with its elegant design and adjustable width of 390-570 mm, it blends seamlessly into any environment, even in museums or galleries. Thanks to the 17 mm TV spigot mount, the lamps can be clicked in effortlessly, eliminating the need for cumbersome securing with screws and wing nuts. The flexible design also allows the lamps to be mounted upright or suspended from the bar. However, slim and elegant does not mean that the LS SUPER TB 01 has compromised on stability: The maximum load is 20 kg per side with symmetrical loading, and the spigot spacing can be varied from 330-515 mm. And should you ever need a third or fourth lamp, additional spigot elements can be fitted in the additional mounting holes.As you probably already know, ergonomic locking screws, interchangeable coloured rings and high-quality workmanship are a matter of course for all Gravity products. However, the integrated hexagon spanner holder is another small detail that further increases the user-friendliness of this T-bar.
This elegant table stand is the ideal holder for one or two large headphones and is suitable for both professional and home use. Two practical slots in the holder ensure that cables or earphones are stored neatly and tidily. The base and column are made of die-cast aluminium, the holder is made of plastic with a rubberised surface.
