With the universal power adapter from LogiLink, you can charge a wide range of devices - from digital cameras and mobile devices to routers and games consoles - with the same charger. Simply attach the appropriate adapter and you're ready to go. Ideal as a reliable replacement or second power supply unit for the home or office. The additional USB port directly on the power adapter allows you to charge another 5V device such as a mobile phone at the same time. All-round protection: Overcurrent, overvoltage, overheating and short-circuit protection.
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Harting connectors can be found wherever professional cabling is used. From industrial applications to theatre and musical installations to rock'n'roll shows, Harting connectors are the first choice when it comes to maximum operational safety. The innovative Easy-Locks can be replaced quickly and without tools.
Harting connectors can be found wherever professional cabling is used. From industrial applications to theatre and musical installations to rock'n'roll shows, Harting connectors are the first choice when it comes to maximum operational safety. The innovative Easy-Locks can be replaced quickly and without tools.
The PG-1 Type F is a professional power conditioner with extensive features. It contains a bank of eight switchable, filtered and overvoltage-protected outputs. Two filtered outputs and a connection for a 3-pin XLR lamp are located on the front, with a further 6 outputs, an earthing terminal and the mains connection on the rear. The display and other LEDs on the front provide constant visual feedback on the input voltage as well as the status of earthing, polarity, filtering of interference signals, AC voltage and overvoltage protection. The outputs are individually optimised for digital, analogue or particularly "current-hungry" devices. A two-stage system for sequenced start-up and shutdown has also been implemented. To minimise unhealthy pop noises when switching speakers and amplifiers on or off, the "High Current" outputs are slightly delayed and are switched on and off last in the system.
The CFD DVT digital interface is used for balanced signal transport from D-Sub to jack. The pin assignment corresponds to the analogue Tascam DSUB 25 specification (DA88). The D-Sub 25-pin male connector has a metal housing. The 8x 6.3mm jack plugs (balanced) are surrounded by nickel-plated metal.The CMD 8 cable by the metre has spiral pair shields made of tinned copper and also a tinned overall braided shield. The cable therefore transports both analogue signals and DMX extremely well.
Corning optical cables offer the Brilliance of Light™, which enables fast Thunderbolt™ 3 connectivity over longer distances. They are thin, light and remarkably robust while supporting high-performance data devices and higher resolution displays.
With the PG-2 Type F, Black Lion Audio presents a high-quality power conditioner in rack format with a multitude of practical functions. The PG-99 filter technology enables almost 100 per cent noise filtering thanks to selected Panasonic and Wima condensers. This puts the PG-2 Type F on a par with significantly more expensive power conditioners in rack format. The powerful overvoltage protection with an absorption capacity of 2775 joules reliably protects the studio hardware from damaging current peaks. Up to 14 devices can be supplied with power. The built-in time delay prevents unwanted "crackling noises" to protect loudspeakers and amplifiers. Equipped with a status display and warning functions, the PG-2 Type F is the professional power distribution system that studio operators can rely on.
Eight-pair Studioloom or Subcore for stages with moderate loads, equipped with eight Adam Hall XLR plugs per side. Individually numbered by printed numbers on the grommet.
The handy dust caps can be used to seal chassis plugs when no cable plug is plugged in. The covers are easy to handle and do not block the sockets underneath when open.
These high-quality GHMT-certified Cat.6A patch cables are ideal for data transmissions of up to 10 Gbit and transmission frequencies of up to 500 MHz. The jacket material used is halogen-free and flame-retardant; the cores are shielded in pairs; the cables also have an overall shield made of copper braiding. The attached RJ45 plugs are equipped with moulded, slimline kink protection and latching nose protection. This makes these connection cables ideal for increased bandwidth requirements of up to 10 Gbit. The cables are available in various colours and lengths.
Colour codes derived from "RGBW".("Blue" became "Black" for better contrast in difficult lighting conditions):Ch.1 : R: redCh.2 : G: greenCh.3 : B: blackCh.4 : W: whiteVersion with 3-pin ConvertCon as a universal snake in the console for in/output, also mixed.DJ version especially suitable for mixers with two XLRs and two 6.3 mm jacks for master and booth-out available.The "LA" version with staggered outputs is also available for applications with active linear arrays.
The Cordial ZZound patch cable in its robust design is ideal for analogue synthesizers and modular systems. The hand-soldered REAN mono mini jack plugs ensure a secure fit and hold. The grommets are marked with a different colour depending on the length.