Fender Deluxe Series cables use only the highest quality materials and braided shielding for durability, conductivity and transparency. These cables have specially moulded ends with strain relief under the housing and 24-carat gold-plated plugs that do not tarnish and do not affect your sound. These Fender cables have a very high quality braided shielding designed to maximise the purity of your tone and are protected by a soft woven yet robust tweed jacket that provides ultimate protection in classic Fender style.
CORDIAL has added both 3-pin and 4-pin mini XLR to jack instrument cables to its range as an inexpensive yet high-quality alternative to the often very expensive original cables from bodypack transmitter manufacturers. The cables are assembled with the indestructible NEUTRIK NP2 jack plug and the robust REAN mini XLR, while the proven, extremely slim CORDIAL Microflex CMK 209 is used by the metre.
Klotz has been fulfilling the highest professional demands when it comes to cable systems since 1979. Wherever reliability and durability are required, you will find Klotz cables. Supposedly small things, such as cables, and details in their manufacturing quality often determine the success or failure of an event.
Corning optical cables offer the Brilliance of Light™, which enables fast Thunderbolt™ 3 connectivity over longer distances. They are thin, light and remarkably robust while supporting high-performance data devices and higher resolution displays.
With the LNI-2 DC, RME presents an active DC filter in a compact and portable housing. The LNI-2 DC separates, regenerates and filters the output signal of any 12 volt DC power supply, thereby ensuring a significant improvement in DC voltage stability and an extremely clean 12V voltage supplysupply. The result is an optimised audio signal and sound without hum, buzz and other noise that can occur from both power supplies and a contaminated mains supply.The LNI-2 DC's operation is based on two key features: galvanic isolation and RME'sexclusive filter. The galvanic isolation significantly reduces the leakage current component that is common in switching power supplies, while at the same time the capacitive coupling between input and output is reduced from typically 1 nF (nano-farad) to less than 35 pF (pico-farad) to prevent noise caused by the leakage current.The filter of the LNI-2 DC consists of a discrete linear regulator with extremely low noise (only a few micro-volts), soft-start, overload and overheating protection as well as sensor technology.The LNI-2 DC works with power sources from 9V-18V DC (input) and always delivers a constant, perfect voltage of 12.0V with 2A at its lockable output. This is ensured by the filter's integrated sensor technology, which checks and compares the output voltage directly at the DC plug of the special 4-core cable supplied, thus completely eliminating load-dependent voltage drops.The two two-colour status LEDs on the top of the device indicate the presence of input and output voltage as well as overload. In addition, it is possible to connect the earth of the DC voltage output to the protective conductor, earth or another device earth via an earthing screw (GND screw terminal) in order to solve problems with the earth wiring.
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.