Stage Lighting

Set up, connect, done! With the FLAT PRO® 12 G2 LED PAR spotlight, you have a professional outdoor all-rounder that takes a lot of work off your hands under adverse conditions - whether as a calibrated and compact IP65 uplight on the façade of a building, as a silent light supplier in the theatre or as an effect light for your live show.Thanks to the patented EZChase® function (DMX Delay), you can create chases without an external controller. This not only saves DMX channels, but also time and nerves. You can also be sure that your ambient lighting will always look homogeneous. No matter how many FLAT PRO G2s you use in combination, the integrated calibration chip ensures that solid and pastel colours from the RGBWA colour spectrum are implemented without deviations.The FLAT PRO® 12 G2 is based on 12 x 10 watt 5-in-1 RGBWA LEDs for an impressive luminous flux of 4,300 lm. Thanks to the adjustable PWM frequency (650 Hz - 25 kHz), you don't have to worry about flickering LEDs when dimming in theatres, TV studios, on film sets or at light art festivals.An outdoor IP65 flat PAR spotlight is only as good as its handling. For this reason, we have optimised the design of the series in many areas. For example, the handle has been inconspicuously integrated into the compact metal housing, while the OLED display with touch-sensitive buttons enables quick and easy operation of the device. After all, every second counts in wind and weather. The revised convection cooling and the professional connection options with Neutrik True-compatible inputs and outputs and 3-pin IP65 DMX sockets ensure maximum reliability.For even more flexible mounting, the FLAT PRO® 12 G2 can be optionally retrofitted with a fold-out 16 mm TV spigot based on the patented SPIN16® technology.The versatile FLAT PRO® 12 G2 IP65 LED PAR spotlight is suitable for all lumen beings who want to live out their passion for light outdoors without compromise.

The CAM-LITE 200 from JB Systems is an inexpensive light panel for live streaming and small studio lighting. The delivery includes the barndoor.

The BTI-CYCLO from Briteq is a powerful full-colour LED cyclorama in IP65 design for indoor and outdoor use. The asymmetric LED floodlight was specially developed for use as a horizontal light or foot ramp.

The Cameo Q-Spot 15 is a compact, RDM-compatible spotlight with 2 additional lenses, which enable a total of 3 beam angles of 4.5°, 10° or 25°. It is available in black or white and is equipped with a powerful 15 W quad LED for vivid RGBW colour mixes. It features colour temperature correction and 16-bit technology for high-resolution colours and optimised dimming. With its flicker-free operation thanks to the 3,600 Hz refresh rate, the Q-Spot is ideal for film and TV use and the effective convection cooling also ensures silent operation.The Q-Spot 15 is supplied with a handy infrared remote control and offers 5 DMX control modes, sound control and use as master, slave or standalone. Other features include the 20 Hz fast strobe function, 4 optimised dimmer curves and the bright display with 4 buttons for easy configuration. The metal housing has 3-pin DMX and blue/white mains inputs and outputs for series connection

Power supply: 230 V AC, 50 Hz ~Total connected load: max. 75 WDimensions(LxWxH): 150 x 100 x 80 mmWeight: 0.16 kgShipping weight: 0.34 kgSubject to ecodesign: YesEnergy efficiency class: NoneRated power: 50.00 WEnergy consumption: 50.00 kWh/1000h

With the BeamX.7, LITECRAFT presents the successor to the MiniPAR AT10. Compared to its predecessor, the BeamX.7 has significantly increased performance and professional features.With its advanced optical system, the BeamX.7 achieves a significantly increased output despite reduced power consumption. The characteristics of the beam are more defined, which expands the classic application possibilities as a truss toner to include beamwork effects.As with all new LITECRAFT products, the housing and mechanics have been optimised. The device has a new Y-bracket that can be optimally locked in any position. The high-quality, milled aluminium housing is elegant, robust and thermally optimised so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations.The BeamX.7 has XLR 5-pin and powerCON connectors - both as input and output. This means it can be easily looped through and discreetly wired. Alternatively, it can be controlled wirelessly via an IR remote control or with an optionally available LumenRadio CRMX module. Internal programs and fixed colours are also available and, like all configurations, can be selected quickly and easily on the LC display.

The PARWASH76-RING is more than just a PAR wash - it is a true inspiration for your creativity. The 7 RGBW LEDs with 6W each provide a main beam with nuanced and vibrant colours, while the RGB LED ring with 48 LEDs will not go unnoticed with its rotating effects or to create a striking cone of light around the main beam.With a diameter of 21 cm, a depth of 10 cm and a weight of just one kilogram, the PARWASH 76 RING is a lighting system that is easy to move and operate and, thanks to its passive cooling, can also be used in small rooms without any problems or noise. It is ideal for private events and indoor performances.Versatile control and installation options.The PARWASH76-RING has a compact format that is ideal for situations where space is limited, while offering a wide beam angle. It is versatile and has automatic, music and a DMX mode that allows control via a DMX remote control in addition to the infrared remote control supplied. Installation of the PARWASH 76 RING is very easy thanks to the double bracket that facilitates installation on the floor.

They can be found at almost every event - whether large or small, on live stages or corporate events, in theatres or TV studios. LED PAR spotlights are the permanent fixtures in the portfolio of every lighting designer and rental provider - and must fulfil the highest requirements in terms of lighting quality, operation and flexible use.With the second generation of the STUDIO PAR series, Cameo has reworked the classic LED PAR spotlight for static lighting at all levels and given the design an unmistakable facelift.The extremely compact STUDIO PAR DTW G2 is based on 12 x 10 W 3-in-1 Tunable White LEDs with an impressive luminous flux of 4,150 lm at an 18° beam angle and uniform light distribution. Thanks to its infinitely variable white light adjustment in the range from 2,800 to 6,800 K, the variable PWM frequency (650 Hz to 25 kHz) and the natural colour rendering (CRI>96), the STUDIO PAR DTW G2 is also suitable for use in theatres, TV studios, on film sets or at indoor light art festivals. Even more versatile is the use in conjunction with the optionally available Cameo iDMX Stick to control the STUDIO PAR DTW G2 wirelessly via W-DMX™.For particularly flexible installation, the STUDIO PAR DTW G2 can optionally be retrofitted with a fold-out 16 mm TV spigot based on the patented SPIN16® technology.

Experience limitless colour mixing possibilities with the Freedom Flex H9 IP X6, a complete lighting package with six 100% wireless, battery-powered Hexagon fixtures (RGBAW+UV) in a charging case that simultaneously charges up to six replaceable batteries so the fixtures are always ready to go. An integrated RF receiver for wireless control with the supplied RFC remote control or the optional RFC-XL remote control and new secondary optics ensure perfect colour mixing with virtually no artefacts. The Freedom Flex H9 IP floodlights are suitable for both indoor and outdoor use and have a robust, weatherproof housing for temporary outdoor use. The floodlights feature OLED full text displays for easy navigation, and the adjustable run times ensure the floodlights will last as long as your events.

They can be found at almost every event - whether large or small, on live stages or corporate events, in theatres or TV studios. LED PAR spotlights are the permanent fixtures in the portfolio of every lighting designer and rental provider - and must fulfil the highest requirements in terms of lighting quality, operation and flexible use.With the second generation of the STUDIO PAR series, Cameo has reworked the classic LED PAR spotlight for static lighting at all levels and given the design an unmistakable facelift.The extremely compact STUDIO PAR 6 G2 is based on 12 x 12 W 6-in-1 RGBW LEDs with an impressive luminous flux of 4,500 lm at a 22° beam angle and uniform light distribution. The possibilities range from subtle pastel shades for atmospheric scenic support in the background to rich and brilliant colours for powerful illumination of objects and surroundings.Thanks to the adjustable PWM frequency in the range from 650 Hz to 25 kHz, the STUDIO PAR 6 G2 is also suitable for flicker-free operation in theatres, TV studios, on film sets or at indoor light art festivals. Even more versatile is the use in conjunction with the optionally available Cameo iDMX Stick to control the STUDIO PAR 6 G2 wirelessly via W-DMX™.For particularly flexible installation, the STUDIO PAR 6 G2 can optionally be retrofitted with a fold-out 16 mm TV spigot based on the patented SPIN16® technology.

With the BeamX.7 IP, LITECRAFT now also offers the successful BeamX.7 in a weatherproof outdoor version. Despite its low power consumption, the device has a high light output. The beam characteristic is narrowly defined at ten degrees, which extends the classic application possibilities as a truss toner to include beamwork effects. For a wider beam angle, the frost filter supplied can be quickly and easily mounted on the device, extending the beam to around 25 degrees.Like all LITECRAFT products, the BeamX.7 IP has a Y-bracket that can be optimally locked in any position. The high-quality die-cast aluminium housing is elegant, robust and thermally optimised so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations. With its compact dimensions, the device naturally also fits into standard 290 mm trusses.The BeamX.7 IP has an XLR 5-pin IP version and powerCON True1 connectors - both as input and output. This allows the device to be easily looped through and discreetly wired. Alternatively, it can be controlled via an IR remote control. Internal programs and fixed colours are also available, which, like all configurations, can be selected quickly and easily on the LC display.

The CE Source Four Junior zoom profile spotlight was designed for flexible use. With a zoom range of 25°-50°, all options are open to the user. A slide-in iris diaphragm is available as an option. Accessories such as snoots, donuts and gobo holders round off the programme.