With CoDot ILS, party lighting fits in the palm of your hand. This puck-sized LED lighting is the perfect solution for small spaces where traditional lights won't fit. Each CoDot ILS features 1 four-colour (RGBW) LED that is suitable for a range of applications. Thanks to D-Fi, ILS and RF compatibility, this spotlight can be operated with the lighting control that best suits your needs. Light up any area of your venue with CoDot ILS.
As an indispensable part of any event or lighting installation, the LED PAR must offer outstanding output, brilliant colour rendering and reliable performance. The PARWASH 730 QUAD developed by Algam Lighting fulfils all requirements with its seven powerful RGB+WW LEDs of 30 W each, its robust housing and professional connections.An absolute must for events.PARs are used at all events worldwide and are the basis of every light show thanks to their easy handling, performance and compactness. The PARWASH 730 QUAD is no exception: despite its compact dimensions of 22 cm diameter and 14 cm depth, this LED PAR with its seven 30-watt LEDs and a beam angle of 25° generates a powerful luminous flux. The RGB+WW colour palette enables intense and vibrant colours.This powerful PAR WASH is suitable for a wide range of applications, from private parties to larger stages. It has a 3-point DMX input/output for precise control and daisy chaining with another PARWASH 730 QUAD. To ensure safe operation, it is equipped with a PowerCon connector with interlock that prevents accidental disconnection and a PowerCon output that allows power to be supplied to another PARWASH 730 QUAD in a chain. It is very powerful and has active cooling to ensure optimum operation, both on the floor and suspended thanks to the double bracket.
With the KL series, ELATION Professional is presenting ten high-quality LED-based stepped lenses. The abbreviation KL stands for Key Light, as the Fresnel spotlights - equipped with a high-quality LED engine - with a stable colour temperature of either 3,000 or 5,600 Kelvin and a colour rendering index of up to 97 combine all the qualities required for guiding light.The ten models are available in the 50, 150 and 350 watt power classes and have comparable professional features, such as continuous zoom in the range of around 11-68° (varies depending on the model). The zoom range of the KL Fresnel 4" and KL Fresnel 6" models can be set manually on the device. The KL Fresnel 8" model has a motorised zoom that can be set either via DMX 512-A from the console or manually using a potentiometer on the device. ELATION offers a rod-operated version with KL Fresnel 6" P.O. and KL Fresnel 8" P.O., where pan and tilt can be adjusted using a rod in addition to the infinitely variable zoom.The professional standard of the KL series is emphasised by absolutely homogeneous 16-bit dimming. The user can optionally adjust the dimmer mode, dimmer curve and dimmer delay depending on the application. In addition, the frequency of the pulse width modulation can be freely selected so that all devices in the KL series can be optionally matched with TV cameras.All devices have XLR 5-pin connections for the DMX signal; the KL Fresnel 6 and KL Fresnel 8 versions also have XLR 3-pin connectors. Power is supplied flexibly via powerCON True1 on the input and output side. All settings can be made on the LC display using the practical menu navigation.A barndoor with 8 blades and a colour filter frame are included with all eight models.
The DTS Profilo LED 80 has four sliders that can be used to precisely shade the beam.Thanks to its very compact dimensions and elegant design, the DTS Profilo LED 80 is perfect for exhibition areas, shops, museums, trade fairs, conferences, churches, etc. Thanks to the LED technology used and the resulting minimal waste heat, the spotlight can also be used in heat-sensitive areas.Equipped with an 80W LED chip with a fixed colour temperature of 3,000K and very good, natural colour rendering, the Profilo LED 80 is the ideal alternative to a conventional spotlight.
The fully outdoor-capable, battery-powered P-1 has eight high-power RGBW LEDs with 12.5 watts each, totalling a whopping 100 watts of LED light output.A variable beam angle of 19°, 45°, 63° /12° elliptical horizontal or 12°/63° elliptical vertical can be quickly realised using click-on filters. Various filters and barndoors round off the extremely professional features of the P-1. All attachments are held in place by magnetic connections and secured with safeties.In mains operation, the battery is bypassed to protect and optimise the service life of the built-in battery cells. You can choose between maximum brightness or maximum battery operating time of 10-12 hours in several stages, depending on the application. The battery status can be read at any time via the display and RDM.The P-1 can be controlled and programmed via wireless DMX, an integrated display/keypad or a mobile phone app.An extension board with a motion sensor serves as anti-theft protection. The luminaire can be activated to flash in the event of movement. The P-1 can also be used for emergency lighting in the event of a power failure, in which case the device automatically switches to 100% white light and is used for evacuation.SGM's own colour calibration makes the P-1 colour-compatible with all products in the P and Q series. The devices can be charged directly in the optional Amptown case.
The BX.7 from LITECRAFT is a multifunctional and outdoor-capable spotlight that has been developed for a wide range of applications. The BX.7 is based on the successful concept of the BeamX.7 IP and, in addition to the identical optics and electronics, also has an integrated lithium-ion battery and a LUMENRADIO CRMXchip. This makes this spotlight suitable for completely wireless operation both indoors and outdoors.The device has the same high light output as BeamX.7 and BeamX.7 IP. The beam angle is narrowly defined at ten degrees, which extends the classic application possibilities as a truss toner to include beamwork effects. For a wider beam angle, the frost filter supplied can be quickly and easily fitted to the device, extending the beam to around 25 degrees.Like all LITECRAFT products, the BX.7 also has a Y-bracket that cannot slip through. The high-quality die-cast aluminium housing is elegant, robust and thermally optimised so that the device does not require active ventilation. This means that it can also be used in particularly noise-sensitive locations. With its compact dimensions, the device naturally also fits into standard 290 mm trusses.The BX.7 has an XLR 5-pin (XLR 3-pin as an additional option) IP version and powerCON True1 connectors - both as input and output. This means that the device can not only be safely charged, but also permanently supplied with mains power for longer-term use. A charge level indicator provides information about the battery status at all times. In addition, an integrated emergency circuit allows operation as an emergency power lamp. Once activated, the device reacts to corresponding signals or settings in mains power mode. In the event of a power failure, it automatically switches to battery operation with a selectable light colour.The BX.7 can be controlled in several ways, depending on the application. Wired control via DMX 512 is of course standard. Another option is professional wireless DMX transmission via the integrated CRMXchip from LUMENRADIO. The CRMXchip is not only compatible with LUMENRADIO transmitters, but also with W-DMX products from Wireless Solution. The device also has internal fixed colours and programs. These can be selected directly on the device or conveniently and quickly using the infrared remote control supplied.
The BT-THEATRE 400TW from Briteq is a powerful LED Fresnel theatre stepped lens, with adjustable colour temperature from 2800K to 6000K, combined with an exceptional photometric/price ratio and very good light output.The LED theatre spotlight is supplied with a 360° rotatable, 8-blade barndoor and a colour foil holder.
The Cameo ROOT® BAR is a linear LED bar that is available in three versions. Thanks to its compact design and impressive versatility, it is ideal for creative lighting design in trendy clubs, small bars or at exclusive events and creates breathtaking lighting effects in any application.The intelligent design allows flexible positioning at different angles, even without the supplied feet. The practical thread also enables both hanging and standing use, making it easier to adapt the ROOT® BAR to different environments.The magnetic Quick Alignment System, in conjunction with the numerous Quick Lock options, ensures quick and precise alignment of multiple LED bars, creating seamless transitions and spectacular light installations. The included frost filter, neon tube filter and glareshield also open up numerous creative possibilities and create impressive visual accents. In addition to the DMX protocol, the ROOT® BAR can also be controlled remotely using the optional IR remote control. For wireless DMX connection via W-DMX™, the ROOT® BAR also has a USB port for connecting the Cameo iDMX® stick. In addition, it is possible to fully exploit the potential of the unique, patented EZchase® DMX delay function, which can be used to create fascinating chase patterns and colour changes with minimal programming effort.The Cameo ROOT® BAR stands for high quality, reliability and modern design. It sets new standards in event lighting and transforms any location into an unforgettable experience.
The WashX.21 from LITECRAFT adds a powerful outdoor floodlight to the X series. Compared to many other LED-based floodlights on the market, which with their very narrow beam angles are actually just larger LED spotlights, the WashX.21 can rightly be described as an LED wash. In combination with high-quality optics, the 21 RGBW LEDs provide a homogeneous wash effect. Saturated colours and pastel shades are mixed very well and impress with their brilliance.The device is controlled via DMX 512 and also has programs and colours for stand-alone operation. The white balance and PWM frequency can also be flexibly adjusted. Thanks to the OLED display and clear menu system, all settings are easy to make, even without operating instructions. An extra feature is the battery buffering of the OLED display, which allows settings and addressing to be made even without power, as well as the optional locking of the display to prevent unauthorised use.The IP 65 protection class also enables long-term outdoor use. The cabling is flexible and simple with IP-protected plug connectors in the powerCON True1 and XLR 5-pin versions.
The Showtec Compact Par 7 Q4 is a compact 7 x 4 watt RGBW LED PAR with double bracket for easy floor positioning, suitable for indoor events. It has a fixed beam angle of 15° and features 0-100% dimming and 0-20 Hz strobe effects, perfect for short throw colour mixing. The Compact Par 7 Q4 can be controlled manually, via DMX and master/slave in manual, auto-run and sound-controlled modes with many built-in programmes available.
The new LED TOUCH WASH from IRIDIUM is equipped with 40 x 10W RGBW LEDs. Thanks to its IP65 classification, the compact device has an almost unlimited range of applications. Handling is simplified by the new IP65 connectors (powerCON TRUE1).
The Thunder Wash 100 W is a strobe, blinder and wash light in one. It is equipped with 132 white SMD LEDs, each with a power of 0.2 watts, has an 80° beam angle and a compact black metal housing with universal mounting bracket. The Thunder Wash 100 W has 3-pin XLR sockets for DMX input and output, 4 DMX modes with dimmer, flash rate and flash duration functions as well as the option of master, slave or standalone operation. An easy-to-read LED display with buttons for mode, enter, up and down is used for manual control, while the built-in microphone is used for sound control.