PA

PE-coated, tear and tear-resistant fabric adhesive tape with a strongly adhesive, shear-resistant natural rubber adhesive with very good ageing resistance, easy to unroll. The standard for use in event technology. Also ideal for insulation, for sealing pipes, heating and fresh air ducts, for fastening and bonding PE foils on building sites and for asbestos removal as well as for masking during hot-dip galvanising. Gerband 250 is also used as "gaffa tape" for bonding and bundling cables and for colour coding.

Earplugs for childrenWinner of the Red Dot Award 2015Alpine Hearing Protection has won the Red Dot Award 2015 for the design of a large part of its product range. The jury of this prestigious design award praised the "high quality and innovativeness" of the earplugs. Read more >>Revolutionary model earplugsTwenty years of experience has enabled Alpine to develop an ideal new model of earplug. The very well thought-out and extensively tested shape of the earplugs ensures natural, flat cushioning and an excellent fit.Multifunctional earplugs for childrenAlpine Pluggies Kids are recommended for children between the ages of 3 and 12, as they still have a smaller ear canal than adults. Children can use Pluggies Kids in numerous situations and for different purposes:Against excessive ambient noiseFor example, against too loud music at a festival, at the cinema and in all other situations where children suffer from too much noise.To protect the ears from waterChildren often suffer from earache and ear infections. With Pluggies Kids, you can prevent water from entering the ear when swimming, showering, bathing or doing water sports.For concentration problemsMany children find it difficult to concentrate at school, when doing their homework or when reading. Children with ADHD, ADD and a form of autism can also benefit from earplugs. Studies show that wearing Pluggies Kids improves concentration.Against earache when flyingMany children have an uncomfortable feeling in their ears when an aeroplane takes off and lands. Pluggies Kids earplugs improve pressure equalisation in the ear so that there is no more pain in the ears. The earplugs also allow you to sleep peacefully on the plane.For adults with smaller ear canalsEvery ear is different. Some adults have a smaller ear canal, which means that earplugs such as the Alpine PartyPlug, Alpine Worksafe and similar fit less well. In this case, you can also use the Alpine Pluggies Kids for listening to music, flying, DIY and swimming. Sleeping with the Alpine Pluggies Kids may be less comfortable than the SleepSoft if you are a side sleeper. This is because the Alpine SleepSoft has a soft, flexible filter and the Alpine Pluggies Kids has a hard filter.AlpineAcousticFilters™ - More fun for your childPluggies Kids earplugs are equipped with special AlpineAcousticFilters. These filters minimise harmful noise, but at the same time ensure that the child absorbs sufficient ambient noise. This means there is no feeling of isolation and the child can still follow conversations.Wearing Pluggies Kids earplugs when travelling by plane regulates the unpleasant pressure on the eardrum during take-off and landing. The filters act like a valve and ensure a gentle and constant equalisation of pressure between the outside world and the middle ear. This gives the eustachian tube enough time to adapt to the pressure differences.AlpineThermoShape™ materialAlpine Pluggies Kids are made from AlpineThermoShape material specially developed by Alpine. The material adapts to the shape of the ear canal so that the earplugs fit exactly into the ear canal. As a result, these earplugs fit very comfortably in the ear and children enjoy wearing these earplugs, whether in the bath, at school or during music lessons. ATS contains no silicones and therefore does not cause allergic reactions.Alpine StickersEach Pluggies Kids pack contains six cheerful stickers. Children can use them to decorate their own storage box and write their name on it.Service life and cleaningThe lifespan of the earplugs depends on how often they are worn Thorough cleaning of the earplugs extends their lifespan. The earplugs can be cleaned with lukewarm water and soap.Dutch designThe design of the Alpine hearing protectors is an exclusive "Dutch Design". All earplugs and filter systems are produced in the Netherlands.Package contents Two universal, thermoplastic hearing protectors Two acoustic filters Alpine sticker Plastic storage case Alpine insertion sleeveAttenuation values Alpine Pluggies KidsFrequency Hz631252505001000200040008000Mean value of sound attenuation dB23.925.825.325.026.530.428.726.0Standard deviation dB3.13.62.73.24.23.54.04.8Assumed protective effect in dB (APV)20.822.222.621.822.326.924.721.2Tested according to EN 352-2: 2002Nominal diameter: 7-10 mmH=24 M=23 L=23SNR=25NRR=23.5-28.6Technical properties Weight28 gramsProduct dimensions100 x 80 x 20 mm (L x W x H)MaterialAlpineThermoShape™ColourWhiteEAN code8717154023541

PE-coated, tear and tear-resistant fabric adhesive tape with a strongly adhesive, shear-resistant natural rubber adhesive with very good ageing resistance. Easy to unroll. The standard for use in event technology. Also ideal for insulation, for sealing pipes, heating and fresh air ducts, for fastening and bonding PE foils on building sites and for asbestos removal as well as for masking during hot-dip galvanising. Gerband 250 is also used as "gaffa tape" for bonding and bundling cables and for colour coding.

Gerband 258 is a universally applicable, fine-threaded fabric adhesive tape for fixing cables, for coloured marking on floors, for seaming in bookbinderies and for coloured labelling. Gerband 258 is easy to unroll, can be labelled and has a matt surface.

The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way loudspeaker is not only suitable for installation, but also as a monitor in the home studio and for other sound reinforcement tasks.The bass reflex design is equipped with a 6.5" custom woofer and a 1" silk dome tweeter with waveguide, which are driven by a Class AB power amplifier with 50 W RMS power and overcurrent protection. An XLR jack combo socket serves as the input, while an XLR socket allows the signal to be looped through. The reproduction is balanced and dynamic over the entire frequency range of 55 Hz - 20 kHz and achieves a maximum sound pressure level of 108 dB. The SAT62AG2 is equipped with a switchable power-saving mode that automatically switches to standby if no signal is present for 3 minutes.The 12 mm thick MDF housing with durable textured paint is available in black and white and is equipped with M6 flying points. An included mounting bracket offers additional mounting options, and a universal joint holder is available as an accessory.

Fischer Amps only supplies NiMH batteries of very high quality. This ensures reliable operation and a long service life. According to the Battery Ordinance (BattV), you as the end user are obliged to return all used batteries and rechargeable batteries.Disposal with household waste is not permitted! Batteries and rechargeable batteries containing hazardous substances are labelled with the symbol of a crossed-out dustbin and the chemical symbol (Cd=cadmium, Hg=mercury, Pb=lead) of the heavy metal responsible for the classification. Used batteries and rechargeable batteries can be returned free of charge to our shop, to other sales outlets for batteries or to the public waste disposal authorities (örE).

The Control 24C/CT Micro has an impressive frequency response for an installation depth of only approx. 10 cm. It is ideal for sound reinforcement with a medium level of music and announcements. The large dispersion range of 150° simplifies installation and enables a uniform sound image across the entire listening area. Fewer loudspeakers are required, which reduces project costs.The Control 24C/CT Micro is equipped with an impedance of 8 ohms. It can also be used in a large installation for areas with lower level requirements. It fulfils the UL1480 standard for fire-resistant warning loudspeakers and the like. It is also particularly resistant to heat and smoke in accordance with the UL2043 standard.

The Zildjian Standard Fit Hi-Fi earplugs have a low-profile design that makes them comfortable to wear under hats, helmets and other headgear. Thanks to the high-fidelity sound reduction, the sound level is evenly reduced, which ensures an unadulterated sound experience.

With the Littlite LED, you get a lamp of the 21st century that has an enormous light intensity with minimal energy consumption thanks to its 10 LEDs. The great advantage of LEDs over conventional "incandescent lamps" is their complete impact resistance and enormously long service life: up to 100,000 hours of operation! Littlite offers a 2-year guarantee on the 10 LEDs and the standard lifetime guarantee on the socket!

The LEDLAMP18-RA LED work light has an adjustable 18-inch gooseneck shaft that ends in a rotatable, right-angled 4-pin XLR connector. The warm white LEDs are characterised by their light output, colour temperature, colour rendering and energy efficiency.

With the DM3 series, sound engineers can capture the sound on stage precisely and without distortion and then add creative accents as required. "Less is more" - with the 9" touchscreen and a single touch & turn control, most of the console's functions can be controlled. The DM3 consoles offer more power and flexibility than you would ever expect from such a compact digital console.

The PB-05 E is the cost-effective version with a plastic housing and a 270 degree potentiometer for distance adjustment. The device is simply plugged between the microphone and the cable. There is an active infrared sensor on the front. This sensor "recognises" when someone is in front of the microphone and switches the microphone on without any switching noises.The microphone is automatically switched off when there is no one in front of the microphone. A red status LED indicates the operating status of the Optogate. The PB-05 E works with 48V phantom power. It eliminates unwanted background noise from instruments in unused microphones. The clarity and dynamics of the useful signal are significantly increased by minimising phase cancellations and interference from other microphones.

The DAP IMIX-7.1 is an installation mixer with 7 channels and 3 master outputs. This allows you to create a good mix between the various inputs and the master volume. You also have the option of adjusting the EQ settings for each output. In total, you can connect two dynamic microphones and five audio devices, whereby the microphone inputs are equipped with a 3-band EQ control and a talkover function that works on both channels.The gain settings for each input are located on the rear panel. This prevents overloading by non-technical users. On the front panel there is a direct input for 2 microphones, 1 line source or a telephone/MP3 device with a special impedance switch.