Description:The CBL-20 is a soft case made of EVAC (ethylene-vinyl acetate copolymer). It is used to conveniently transport a LiveTrak L-20 or LiveTrak L-12 as well as the accessory components (power supply unit, cables and SD cards). The device (L-20 or L-12) can be securely fastened using integrated straps and protected from shocks and damage by internal padding. An adapter moulded piece is included in the bag for the L-12. The scope of delivery also includes a shoulder strap with padding to reduce the load.
Flame-retardant and self-extinguishing soft PVC adhesive tape with a highly adhesive natural rubber adhesive with high shear strength and ageing resistance. For fastening and bonding the longitudinal and transverse joints of PVC-coated insulating pipe shells and PVC insulating foils.
The Electro Voice Everse 12 Tray is the perfect accessory for owners of the Everse 12 system. This practical tray offers space for R300 or RE3 wireless transmitters and includes a DC power cable for both models. With a length of 650 mm, it offers enough space for your devices. The tray has a Velcro fastener to securely fasten items and two recesses to securely hold wireless handheld microphones. The elegant black design perfectly matches your Everse 12 system and rounds off the overall look. With the Electro Voice Everse 12 Tray, you always have everything you need for a perfect performance to hand.
With this gig bag you can transport everything you need for a gig. It has been specially designed to protect the battery-powered Mackie ShowBox PA system and also offers space for many other devices and accessories. A microphone stand can be attached to the side of the bag and microphones, cables, spare batteries, guitar picks and much more can be stored in the pockets. The padded straps and mesh design provide good ventilation and comfort when using the bag as a backpack, or you can use the side handle to carry the entire live setup by hand. Either way, with the ShowBox gig bag you have everything in one place.
This roller board is made of 15 mm birch plywood, which is extremely resistant and durable thanks to a polyurea coating. It is specially designed for the MAUI 28 G3 subwoofer. Four 80 mm heavy-duty swivel castors, two of which have locking brakes, make it easy to move the subwoofer.
User-friendly, for non-contact voltage testing from 90 V to 1000 V AC. Simply hold the tip in a socket, lamp socket or on an insulated cable. Suitable for tracing concealed cables and localising cable breaks. If AC voltage is present at the relevant measuring point, this is indicated visually by a flashing red LED and the integrated buzzer sounds. If the measuring point is de-energised, the test probe lights up green continuously.
Manufactured to fit perfectly and equipped with many practical details, the Weather Protective Covers are the ideal protection against moisture and wetness, as well as robust transport protection for all LINEAR 5 MK II mid/high units and subwoofers (except LINEAR 5 MK II 308 LTA and 118 Sub HPA).Behind the front flap, a waterproof acoustic gauze protects the front of the speakers and the drivers without affecting the sound of the systems. Depending on the model, the front flap can be simply and securely clipped to the side of the speaker or rolled up at the head end without interfering with stacking, clustering or cardioid setups.At the rear, sturdy, transparent viewing windows keep water away from the electronics, but ensure that the settings can be read at all times and provide access to the controls and a cable inlet.The handles remain usable thanks to closable recesses or cut-outs. On the 115 XA, 112 FA and 115 FA mid/high units, the tilt brackets can be installed even when the Weather Protective Cover is in place. The subwoofer covers provide lockable access to the thread for the spacer rods. The cut-out is kept as small as possible and can be easily sealed if required. Sufficient cooling of the electronics is ensured at all times.
Manufactured to fit perfectly and equipped with many practical details, the Weather Protective Covers are the ideal protection against moisture and wetness, as well as robust transport protection for all LINEAR 5 MK II mid/high units and subwoofers (except LINEAR 5 MK II 308 LTA and 118 Sub HPA).Behind the front flap, a waterproof acoustic gauze protects the front of the speakers and the drivers without affecting the sound of the systems. Depending on the model, the front flap can be simply and securely clipped to the side of the speaker or rolled up at the head end without interfering with stacking, clustering or cardioid setups.At the rear, sturdy, transparent viewing windows keep water away from the electronics, but ensure that the settings can be read at all times and provide access to the controls and a cable inlet.The handles remain usable thanks to closable recesses or cut-outs. On the 115 XA, 112 FA and 115 FA mid/high units, the tilt brackets can be installed even when the Weather Protective Cover is in place. The subwoofer covers provide lockable access to the thread for the spacer rods. The cut-out is kept as small as possible and can be easily sealed if required. Sufficient cooling of the electronics is ensured at all times.
The MAUI 28 G3 subwoofer is optimally protected from the weather and other influences with the padded protective cover made of hard-wearing and water-repellent 1680D nylon. The 8 mm thick lined protective cover can be easily slipped over the upright subwoofer and, together with the optional MAUI 28 G3 CB roller board, offers comprehensive protection from all sides. Thanks to the reinforced cut-outs including Velcro flap on the sides and top, the subwoofer can also be gripped and transported with protection.The protective cover has an outer pocket for stowing accessories such as mains and XLR cables.
Gerband 258 is a universally applicable, fine-threaded fabric adhesive tape for fixing cables, for coloured marking on floors, for seaming in bookbinderies and for coloured labelling. Gerband 258 is easy to unroll, can be labelled and has a matt surface.
The safest and easiest way to transport your MAUI® 28 G3 columns.This padded bag with smooth-running zip is made of durable and water-repellent 1680D nylon.Inside, an 8 mm thick padding between the columns protects against scratches. Additional protection is provided by the rubber feet at the bottom of the bag. Two included foam caps fit perfectly on the multipin contacts to protect them from damage and ensure a secure fit in the bag.The bag has two handles that can be connected to form a carrying handle using a Velcro fastener with padding. The adjustable shoulder strap with shoulder padding is ideal for transporting the columns and keeping your hands free for other equipment.
Especially for you as a musician, the topic of "customised hearing protection" is very important, because your perfect hearing is the basis and condition for the quality of your work. Protect your ears during band rehearsals, live concerts and wherever it gets loud.With the "ER" hearing protection, which is perfectly customised to your ear and offers almost linear attenuation of frequencies, you are perfectly equipped.
The dbx CT3 is a professional cable tester for use on stage and in the studio. It can be used to check cables in 10 different plug formats for correct function. The dbx CT3 is very easy to use. To test very long cables or cables laid in the wall, the CT3 can simply be split in the centre. Correct function or faults are indicated acoustically and visually. The cable tester is powered by two 9 volt block batteries. This means that the dbx CT3 can be used flexibly anywhere.Testable cables/connectors: 2x MIDI (5-pin DIN), 2x BNC, 2x RCA, 2x XLR, 2x Speakon, 2x 6.5 mm jack, 2x RVA Phono, 2x RJ45 (Cat5), 2x RJ11, 2x DMX