Wireless Systems

The d:fine™ 4166 omnidirectional headworn microphone combines the legendary sound of the d:fine™ 4066 omnidirectional capsule with a lightweight and flexible headworn system. This condenser microphone is quick and easy to set up and delivers clear and transparent sound quality with plenty of headroom. The capsule itself is of the same type as the d:fine™ 4066, but attached to an interchangeable boom arm.Like all microphones in this series, the d:fine™ 4166 omnidirectional headworn microphone offers accurate, natural speech intelligibility and handles very high sound pressures. Wearers can speak or sing into the microphone without the slightest distortion.

The U500® series has been developed around your needs. Professional sound, amazing performance and reliability at an affordable price have always been the focus of our development team. Because we want to inspire you with our U500® series with the same passion that you want to inspire your audience on stage. We hope you love it as much as we do - the new U500® wireless vocal set from LD Systems.With a selectable transmission power of up to 30 mW, the vocal sets in the U500® series achieve a range of over 100 metres in free field. They are available for three radio frequency bands: 584 - 608 MHz and 655 - 679 MHz, in each of which you can operate 12 systems simultaneously; in the 823 - 832 MHz + 863 - 865 MHz range, six systems can be used simultaneously. The True Diversity UHF wireless systems are equipped with an automatic search function that finds the best free frequency and simplifies setup with the convenient one-touch infrared synchronisation of transmitter and receiver.High-contrast OLED displays offer an optimum overview of functions with displays of group, channel, radio frequency, signal strength and battery status, and individual user names can also be entered. In addition to the squelch, an inaudible pilot tone on the transmitter ensures interference-free operation. It protects against interference and mutes the receiver if there is a radio signal without this tone. The effective U500® technology with high-quality components achieves precise, distortion-free transmission without latency or artefacts. The low power consumption ensures a transmitter runtime of up to 10 hours with two AA batteries.The vocal sets in the U500® series are available with handheld transmitters, headsets, lavalier microphones and single or dual receivers. The handheld transmitters can also be flexibly tuned for vocals and speech using interchangeable microphone capsules.Overview of frequency ranges for vocal sets:U505 // 584 - 608 MHz // 12 systems can be used simultaneouslyU506 // 655 - 679 MHz // 12 systems can be used simultaneouslyU508 // 823 - 832 MHz + 863 - 865 MHz // six systems can be used simultaneouslyU506 UK (channel 38) // 606 - 614 MHz // six systems can be used simultaneouslyU518 // 1785 - 1800 MHz // four systems can be used simultaneously

Robust bodypack transmitter for daily use on stage with the evolution wireless G4 100 series system.

Robust bodypack transmitter for daily use on stage with the evolution wireless G4 100 series system.High transmission power (up to 30 mW), depending on country-specific regulations and up to 20 compatible channels.

The d:fine™ 4166 omnidirectional headworn microphone combines the legendary sound of the d:fine™ 4066 omnidirectional capsule with a lightweight and flexible headworn system. This condenser microphone is quick and easy to set up and delivers clear and transparent sound quality with plenty of headroom. The capsule itself is of the same type as the d:fine™ 4066, but attached to an interchangeable boom arm.Like all microphones in this series, the d:fine™ 4166 omnidirectional headworn microphone offers accurate, natural speech intelligibility and handles very high sound pressures. Wearers can speak or sing into the microphone without the slightest distortion.

These new variants combine the renowned 5 mm capsules with CORE by DPA technology with the Red Dot award-winning Refine neckband.These are the most advanced headsets - safe, durable and flexible - for theatre, broadcast, church or conference applications.

Versatile complete system with two transmitter modules and a 2-channel receiver, ideal for interviews and other occasions where two sound sources need to be recorded or transmitted simultaneously and separately. The small transmitter modules already have a built-in microphone and can be conveniently attached to clothing with their clip. The modules each have an internal LiPo battery that allows up to 7 hours of operation. The range of the radio link is a full 260 metres in a clear line of sight.The signal quality is at its best, both analogue and digital: crystal clear and ready for immediate transmission. The transmitters work with RØDE's ingenious GainAssist automatic levelling system. The limiting sound pressure level of the built-in microphone is a whopping 123.5 dB SPL - so ugly distortions are virtually impossible. If you wish, you can record the sound directly in the transmitter module with 32-bit float; the internal memory is sufficient for more than 40 hours. The receiver module provides two-channel audio output, either analogue via the receiver's 3.5 mm TRRS socket or digital via the USB-C socket. In addition to a camera, the receiver can also be connected to a smartphone or iPhone. The necessary USB cables are included in the scope of delivery. The highlight: If you use the USB-C port for sound output, you can use the 3.5 mm socket for headphones to listen in on the recording. As this is a four-pin TRRS socket, you can also connect a headset or wired mobile phone headphones and thus integrate a third microphone signal. Wireless GO comes with a comprehensive range of accessories, including a triple USB strip (SC33), a 3.5 mm TRS connection cable (SC2) to the camera, a USB-C to Lightning cable (SC21), a USB-C to USB-C cable (SC22), three fur windscreens for outdoor recordings and a high-quality neoprene carrying case. The modules are manufactured at RØDE's precision facility in Sydney, Australia.The TX transmitter modulesEach of the two 4x4 cm transmitter modules has a high-quality microphone built in, which has been optimised for voice transmission. The clip on the back makes it easy to attach the transmitter module to clothing. For outdoor recordings, you should always use one of the supplied fur windscreens. Simply pull back the hair and attach the windscreen so that the two white dots match the two black dots on the module. Then turn it a quarter turn to the right and it will sit securely on the module.If the transmitter module is too conspicuous in the picture, you can use the 3.5 mm TRS socket on the side and connect an external microphone - for example the Lavalier GO or Lavalier II - there. The TRS socket has an external thread so that the plug of the Lavalier II can be screwed on with its union nut. This makes it impossible to accidentally loosen the plug. GainAssist technologyGainAssist, RØDE's intelligent automatic gain control system, which permanently adjusts the internal gain setting in the transmitter module to the respective sound source, is very helpful. In this way, you are protected from surprises and the audio signal is always transmitted at a healthy level and with the best possible intelligibility.Recording in the transmitter module, 32-bit float audioWireless GO offers a recording function directly in the transmitter module and an internal 32 GB audio memory for this purpose, which is sufficient for more than 40 hours. The recording is uncompressed as a WAV file with 32-bit float audio. The advantage: as long as the limit sound pressure level of 123 dB is not exceeded, it is virtually impossible to distort the signal through digital clipping. Very loud passages with flattened level peaks can be subsequently equalised by normalisation during post-production in a DAW compatible with 32-bit float.The RX receiver moduleDSLR film-makers can attach the receiver module to the camera's hot shoe. The 3.5 mm socket on the module is then connected to the camera's 3.5 mm microphone input using the short TRS spiral cable supplied. You can then set whether the signals from the two transmitters are output separately (TX1 left/TX2 right) or in mono - in this case, the signals from TX1 and TX2 are combined and recorded identically on the left and right channels of the camera so that the sound comes directly from the centre during playback in the stereo image. The two buttons on the front are used for configuration; the colour LC display provides information on the input level, level reduction, mute status, battery charge status of the transmitter and receiver, connection status, display mode and output level or output mode.Flexibly usable outputsThe USB-C port of the receiver module is not only used to charge the battery, but also as a digital output to output the sound to a smart phone or iPhone. The scope of delivery includes both a USB-C to USB-C cable and a USB-C to Lightning cable. If you use the USB-C port for sound output, the 3.5 mm TRRS socket is free to connect headphones and control the audio signals directly during recording. You can also connect a headset or mobile phone headphones and also use the microphone.ConfigurationThe free "RØDE Central" software can be used to update the firmware, activate additional functions and make special settings. For example, you can activate the safety mode, which makes the sound output on the right channel 20 dB quieter. If the sound on the main track (left channel) becomes audibly distorted at any point (e.g. due to an unexpectedly loud sound source), you can simply switch back to the quieter safety track in post-production. The Auto On/Off function is also interesting for DSLR film makers. Once activated, the receiver module switches on and off automatically together with the camera. The receiver detects the 4 volt plug-in power applied to the camera's microphone input.

The PG30 headset is an affordable, compact condenser microphone for presentations and aerobics instructors, combining simple setup, reliable performance and typical Shure sound quality.The BLX series systems in our online range are located in the S8 frequency band (823 - 832 MHz), which is free of registration and licence fees.The following other frequency ranges are also available on request:H8: 518 - 542 MHzK3E: 606 - 630 MHzK14: 614 - 638 MHzM17: 662 - 686 MHzQ25: 742 - 766 MHzR12: 794 - 806 MHzT11: 863 - 865 MHz

The innovative wireless microphone systems in the ACT-500 series are the result of years of extensive experience in the design and manufacture of microphone and wireless systems. The handheld transmitters have a robust metal housing and are available with AA batteries or Li-ion rechargeable batteries. Various chargers are available for the systems with rechargeable battery technology. A charge level indicator on the transmitter provides information on the charge status of the batteries or rechargeable battery. The ACT-500 series combines professional features, user-friendly operation and excellent quality with a very good price-performance ratio.

The RØDE Lavalier is a discreet, broadcast-quality clip-on microphone for all conceivable applications. The lavalier's low self-noise, practical omnidirectional pattern and unobtrusive design make it the ideal microphone for film, television, video, theatre, houses of worship and any other situation where the speaker should be heard but the microphone should be hidden from view. A 1.2m long shielded cable with Kevlar® reinforcement is used for the connection, which can withstand a pulling force of up to 10kg without complaint. Thanks to the included fur windscreen, the microphone can also be used outdoors. Also included are clips for discreet cable routing without restricting the user's freedom of movement. The unbreakable and waterproof transport box provides secure protection for the microphone as well as the cable, clips and other accessories. To maximise flexibility, RØDE has developed a MiCon™ connection system that allows the lavalier to be connected to a wide range of wireless systems, mixing consoles, cameras and field recorders. The RØDE Lavalier is manufactured in Australia and comes with an innovative 5-year warranty from RØDE Microphones: 12 months full warranty and after-sales warranty of a replacement microphone for only US$99 during the extended warranty period.

The SL Handheld Set includes the handheld microphone, a stationaryreceiver and everything required for installation and use. The MME 865 condenser capsule is also included. This is not just any microphone capsule, but the best capsule for speech applications.All sets are offered with a rechargeable battery with up to 15 hours operating time. The battery can be charged via USB and the corresponding cable is included in the scope of delivery.

These microphones combine the legendary sound of the 4088 directional capsule with the lightweight, flexible d:fine™ headworn system. The d:fine™ 4188 directional headworn microphone is ideal for spoken word and vocals. It follows the DPA tradition of providing accurate and natural speech intelligibility and handling very high sound pressures - users can both speak and sing into the microphone without any sign of distortion.This microphone offers excellent off-axis rejection at high SPL. It effectively suppresses distant sound sources, making it perfect for demanding live performances with potentially problematic background noise and feedback. At high SPL or feedback, the 4088 directional capsule overcomes such challenges with ease. The bass response has been designed for optimum linearity 2-3 cm away from the sound source. This means that the bass roll-off will be relatively clear at a greater distance - a very important factor when attenuating background noise and combating feedback. The microphone capsule is also characterised by low distortion and moisture resistance.

The DMS300 Vocal Set P5 is a digital wireless system for vocals and presentations. It consists of a wireless microphone and a receiver. The system is free of registration and fees worldwide as it operates in the 2.4 GHz frequency range. Thanks to uncompressed radio transmission at 24 bit/48 KHz, the audio quality is consistently high. To protect confidential content, the signal is encrypted to prevent eavesdropping during transmission.The sound of the wireless microphone is powerful and clear. Speech and vocals in particular are reproduced clearly. The supercardioid directional characteristic makes it insensitive to feedback. Disturbing popping and breathing noises are effectively prevented by a built-in windscreen. The wireless microphone runs for up to 12 hours on just 2 AA batteries. The battery status is displayed on the receiver and also on the hand-held transmitter via an LCD display.The DMS300 system is very easy to operate. An available frequency is automatically recognised and set. To ensure that the radio transmission is not impaired by WLAN and Bluetooth devices, the receiver changes the radio frequency as soon as overlaps are detected. The receiver is equipped with two antennas for reliable transmission. Up to eight DMS300 systems can be synchronised and operated in parallel.A mounting kit for rack installation is optionally available. For trouble-free operation, the distance between transmitter and receiver should not exceed 30 metres