If a multicore cable Sub-D 25-pin male to eight XLR 3-pin male that is compatible with the analogue Tascam specification DSUB25 (DA88) is required in the stage and studio area, the CFD DFT is used. The metal housing of the plugs is nickel-plated.With its spiral shields made of tinned copper and an additional tinned overall braided shield, the CMD 8 bulk cable used ensures excellent transmission of analogue and DMX signals.
It's time for a change! For decades, little has changed in the basic concept of instrument cables: A copper core on the inside, a PVC sheath on the outside. This recipe for success has long guaranteed robust and flexible cables.However, what is not taken into account is that PVC cannot be easily recycled due to certain additives! As a novelty, Cordial has opted for a completely new jacket material that completely dispenses with PVC! Sustainable and, above all, at least as high quality as anything that has gone before.The alternative to PVC is called TPE-V. This is a mixture of soft/elastic components, which ensure flexibility, softness and good winding properties - as well as harder components, which enable both notch resistance and use at high operating temperatures.
The Ethercon QUAD DMX-AES/EBU adapter utilises one pair of wires of a common 4-pair CAT cable and thus enables the cost-efficient transport of four parallel DMX or AES/EBU signals.It is fitted with black Male NEUTRIK® XLR metal connectors in 3-pin design. The individual cables are TIA 568 A colour-coded and terminate after a 70 cm split in a special metal cable socket with strain relief and kink protection based on the well-known NEUTRIK® NE8FF.We recommend network cables with at least one overall shield for the long distances in between. Distances of up to 150 metres are possible when using the high-quality CORDIAL CCAT 7A LONG RUN with a wire gauge of AWG 23.An ingenious solution for rental companies and event technology service providers in the "audio and video over IP" sector to extend the utilisation possibilities of high-quality network cable reels.
The passive DI box CES 01 from CORDIAL isäa bridgeübridge between high sound qualityäand cost efficiency. Technically, this enablesöit enables the connection of line level or loudspeaker outputsäto the balanced mixing console inputäinputs with microphone level sensitivity. Ground lift and 30dB preäattenuation can beöcan üover largeßfläcan be switched on via large toggle switches. The CES 01 requiresöno batteries or phantom power. A sturdy shielded steel housingähousing with non-slip feetfeetfeet and recessed control elements ensureüand minimises the risk of accidental damageädamage. The Üthe transducer and sockets are "REAN made by NEUTRIK" and guarantee a long service life.
