The CSI RP-SILENT guitar and bass cable is equipped with a NEUTRIK® Silent Plug mechanism that makes unplugging the plug from the instrument noiseless - without loud and cracking noises, even with a fully turned up amp. The advanced reed switch in the NEUTRIK® Silent Plug mutes the guitar signal at the instrument and thus effectively prevents cracking and humming.The CORDIAL CGK 175 cable by the metre with a conductor cross-section of 0.75 mm2 was selected to match this top cable: low conductor resistance, low mechanical noise and minimal capacitance for the most brilliant sound.
CORDIAL has added both 3-pin and 4-pin mini XLR to jack instrument cables to its range as an inexpensive yet high-quality alternative to the often very expensive original cables from bodypack transmitter manufacturers. The cables are assembled with the indestructible NEUTRIK NP2 jack plug and the robust REAN mini XLR, while the proven, extremely slim CORDIAL Microflex CMK 209 is used by the metre.
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
The CPM FM microphone cable with black NEUTRIK® plug is used as a professional balanced connection to the stage box or console. The 0.22 mm2 copper (OFC) used ensures dynamic sound - at an affordable price.Transparent shrink sleeves at the cable ends simplify individual labelling.
It's time for a change! For decades, little has changed in the basic concept of instrument cables: A copper core on the inside, a PVC sheath on the outside. This recipe for success has long guaranteed robust and flexible cables.However, what is not taken into account is that PVC cannot be easily recycled due to certain additives! As a novelty, Cordial has opted for a completely new jacket material that completely dispenses with PVC! Sustainable and, above all, at least as high quality as anything that has gone before.The alternative to PVC is called TPE-V. This is a mixture of soft/elastic components, which ensure flexibility, softness and good winding properties - as well as harder components, which enable both notch resistance and use at high operating temperatures.
The Cordial ZZound patch cable in its robust design is ideal for analogue synthesizers and modular systems. The hand-soldered REAN mono mini jack plugs ensure a secure fit and hold. The grommets are marked with a different colour depending on the length.
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.
It's time for a change! For decades, little has changed in the basic concept of instrument cables: A copper core on the inside, a PVC sheath on the outside. This recipe for success has long guaranteed robust and flexible cables.However, what is not taken into account is that PVC cannot be easily recycled due to certain additives! As a novelty, Cordial has opted for a completely new jacket material that completely dispenses with PVC! Sustainable and, above all, at least as high quality as anything that has gone before.The alternative to PVC is called TPE-V. This is a mixture of soft/elastic components, which ensure flexibility, softness and good winding properties - as well as harder components, which enable both notch resistance and use at high operating temperatures.
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
