The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Two Powercon plugs on one cable (blue for power in and grey for power out) if Speakon connections are available on both sides for the power supply of active speakers in professional stage applications. This task for event technicians is mastered with the CFCA FCB.
Based on the highly flexible CMFLEX 222 metre cable, the CPM FM-FLEX microphone cable offers flexibility and durability for intensive stage and studio use.Assembled with XLR-female and XLR-male connectors, the cable is available in a particularly wide range of lengths from 1 metre to 20 metres. The possible applications therefore range from "patch" to "long distance".Always flexible - and without twisting or breaking.
The CDX-1 offers an efficient solution for rental companies and event organisers in the field of stage lighting.This AES/EBU-certified DMX cable is equipped with black, 5-pin XLR female and XLR male metal connectors from Neutrik, the cable has 3-pin connectors.The high-quality CDMX-1 is used as the cable metreware, in which the pair shield is made of foil and the overall shielding consists of a braid of tinned copper wires. It fulfils the EIA 485 standard and DMX 512 specification and guarantees high tensile strength, especially for controlling intelligent spotlights, moving heads and dimmers. A transparent shrink sleeve has been attached to both ends so that the cable can be individually labelled during use.Please note the logic of the DMX standard, which is the reverse of the XLR logic in the audio sector. For DMX, a female connector is provided on the transmitter and a male connector on the receiver.
The Cordial patch cable in its robust design is ideal for analogue synthesizers and modular systems such as the Korg Monotron or the Volca series. The REAN connectors made by Neutrik ensure a secure fit and hold.
The concept of the passive 2-channel DI box CES 02 from CORDIAL®follows the trend towards stereo outputs on keyboards, samplers and effects units and is used to conveniently connect line level outputs to balanced mixing console inputs with microphone level sensitivity. A practical feature is the possibility of looping through the signals, not only for the 6.3 mm jack but also for the cinch connection format, which is often found on semi-professional CD / minidisc / cassette / DAT players. Electrically, the CES 02 has a completely ground-separated internal structure, so that two mono signals can also be transmitted without crosstalk. The CES 02 does not require batteries or phantom power. The technical data of the transformers correspond to the studio standard.
The Ethercon QUAD DMX-AES/EBU adapter utilises one pair of wires of a common 4-pair CAT cable and thus enables the cost-efficient transport of four parallel DMX or AES/EBU signals.It is fitted with black female NEUTRIK® XLR metal connectors in 3-pin design. The individual cables are TIA 568 A colour-coded and terminate after a 70 cm split in a special metal cable socket with strain relief and kink protection based on the well-known NEUTRIK® NE8FF.We recommend network cables with at least one overall shield for the long distances in between. Distances of up to 150 metres are possible when using the high-quality CORDIAL CCAT 7A LONG RUN with a wire gauge of AWG 23.An ingenious solution for rental companies and event technology service providers in the "audio and video over IP" sector to extend the utilisation possibilities of high-quality network cable reels.
The CDX-1 offers an efficient solution for rental companies and event organisers in the field of stage lighting.This AES/EBU-certified DMX cable is equipped with black, 5-pin XLR female and XLR male metal connectors from Neutrik, the cable has 3-pin connectors.The high-quality CDMX-1 is used as the cable metreware, in which the pair shield is made of foil and the overall shielding consists of a braid of tinned copper wires. It fulfils the EIA 485 standard and DMX 512 specification and guarantees high tensile strength, especially for controlling intelligent spotlights, moving heads and dimmers. A transparent shrink sleeve has been attached to both ends so that the cable can be individually labelled during use.Please note the logic of the DMX standard, which is the reverse of the XLR logic in the audio sector. For DMX, a female connector is provided on the transmitter and a male connector on the receiver.
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
