LD Systems

The new Stinger series from LD Systems continues along the path that was already very successfully started with the previous models.Robust speakers suitable for everyday use in a reasonable quality with an exceptional price/performance ratio. Not only do the active speakers cut a fine figure in full-range, monitor or satellite mode, but the active subwoofers can also hold their own against competitors' products, some of which are considerably more expensive.

With the perfect monitor sound directly in your ear, you can move around the stage with complete freedom: the wireless U500® in-ear monitoring systems offer powerful performance and maximum reliability that are sure to exceed your expectations. We have developed them with state-of-the-art technology, a clear design and uncomplicated operation especially for professional users.U500® in-ear systems offer a choice of 96 transmission channels with a selectable RF transmission power of 2, 10 or 30 mW for a range of over 100 metres. Fast and convenient infrared synchronisation simplifies transmitter and receiver setup. High-contrast OLED displays provide an optimum overview of functions, and individual user names can be entered and 10 customised presets saved.For a clean, precise sound, the U500® in-ear monitoring systems have a 3-band EQ with parametric mids, a switchable limiter and a squelch. They can be operated in mono, stereo or focus mode, and a practical headphone output allows the input signals to be monitored directly at the transmitter. U500® in-ear systems are also characterised by extremely low noise with a signal-to-noise ratio of over 95 dB and a distortion factor of less than 0.3%.The low power consumption of the U500® bodypack receiver ensures a long operating time of up to 10 hours with two AA batteries. A practical control allows the monitoring volume to be individually adjusted during the performance. The response threshold of the squelch can be set to one of three levels to ensure interference-free sound at all times.U500® in-ear systems are available for operation in five frequency bands: 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz and 655 - 679 MHz, in each of which you can operate 12 systems simultaneously; in the 823 - 832 MHz + 863 - 865 MHz range, six systems can be used simultaneously and utilised for your entire band.

ANNY® - your battery-powered sound reinforcement solution for really anywhere: whether in the city, in the garden, at the club, at sports, at school and dance events, in bars, at parties, wherever you are, with ANNY you can provide professional sound and create unforgettable moments.As the lightest and most compact model in the ANNY® series, the ANNY® 8 is equipped with an 8" woofer and a 1" tweeter. Thanks to its balanced weight and practical carrying handle, it is easy to transport. ANNY® 8 thus offers an ideal combination of compactness, mobility and impressive sound performance.The tilt-back housing allows you to tilt your ANNY® 8 backwards when it is standing on the floor. This allows you to optimise sound dispersion or use it as a monitor.The ANNY® 8 can also be used on a speaker stand to provide sound for a larger audience.With an integrated 5-channel mixer, 3-band EQ, 5 application presets (MUSIC, LIVE, VOCAL, ECO, FLAT) and effects such as reverb & delay, it combines extensive features and top sound quality in a compact and timeless design. ANNY 8 impresses with its versatile connection options: two microphone/line combo inputs, a stereo channel with 3.5 mm jack (AUX) and RCA inputs as well as Bluetooth 5.0 with AAC codec.This versatility enables a wide range of setups for a successful mix of speech and music. The footswitch input allows you to easily switch the Reverb & Delay effects on and off with an external footswitch while playing or singing.To enable clear announcements in any situation, you can use the "Priority" function. Simply select your microphone in the priority settings and the music will automatically be turned down when you use your microphone.The ANNY® 8 BPH variant is equipped with a headset microphone including a bodypack transmitter - simply insert the AA batteries supplied and you are ready to go. The volume can be adjusted separately on the matching receiver module on the back of the ANNY. This expands your connection options with an additional input channel - giving you even more combination options.In addition to the versatile application options, True Wireless Stereo (TWS) allows you to connect two ANNY® 8 speakers together to enjoy your music in stereo - a quick upgrade to provide parties and events with impressive sound.Don't worry, you can turn up the volume on your ANNY, because the integrated DynX® DSP (Gen.2) produces a distortion-free, clean and powerful sound even at maximum volume.Thanks to the energy-saving ECO preset, ANNY can be used for background music or voice-only applications for a particularly long time. At medium volume, this mode enables continuous operation for up to 11 hours. For your party with the volume fully turned up, the battery lasts up to an impressive 3.5 hours in the MUSIC preset when fully utilised. With the optionally available spare battery, the playing time can be extended accordingly; simply replace the empty battery with a fully charged spare battery and you're ready to continue.To ensure that your mobile phone or tablet is always ready for use, you can place it in the integrated holder and charge it via the USB-C port on the back of the ANNY.If you travel a lot with your ANNY 8, the ANNY 8 BACKPACK, available as an accessory, is the ideal transport backpack with versatile carrying options: Shoulder strap, rucksack straps and carrying handle. The water-repellent backpack offers additional storage space and reliably protects your ANNY 8 in wind and weather.So, go out and create unforgettable moments. With ANNY by your side, you'll create a great atmosphere and first-class sound - wherever you are.

ANNY® - your battery-powered sound reinforcement solution for really anywhere: whether in the city, in the garden, at the club, at sports, at school and dance events, in bars, at parties, wherever you are, with ANNY you can provide professional sound and create unforgettable moments.As the lightest and most compact model in the ANNY® series, the ANNY® 8 is equipped with an 8" woofer and a 1" tweeter. Thanks to its balanced weight and practical carrying handle, it is easy to transport. ANNY® 8 thus offers an ideal combination of compactness, mobility and impressive sound performance.The tilt-back housing allows you to tilt your ANNY® 8 backwards when it is standing on the floor. This allows you to optimise sound dispersion or use it as a monitor.The ANNY® 8 can also be used on a speaker stand to provide sound for a larger audience.With an integrated 5-channel mixer, 3-band EQ, 5 application presets (MUSIC, LIVE, VOCAL, ECO, FLAT) and effects such as reverb & delay, it combines extensive features and top sound quality in a compact and timeless design. ANNY 8 impresses with its versatile connection options: two microphone/line combo inputs, a stereo channel with 3.5 mm jack (AUX) and RCA inputs as well as Bluetooth 5.0 with AAC codec.This versatility enables a wide range of setups for a successful mix of speech and music. The footswitch input allows you to easily switch the Reverb & Delay effects on and off with an external footswitch while playing or singing.To enable clear announcements in any situation, you can use the "Priority" function. Simply select your microphone in the priority settings and the music will automatically be turned down when you use your microphone.The ANNY® 8 BPH variant is equipped with a headset microphone including a bodypack transmitter - simply insert the AA batteries supplied and you are ready to go. The volume can be adjusted separately on the matching receiver module on the back of the ANNY. This expands your connection options with an additional input channel - giving you even more combination options.In addition to the versatile application options, True Wireless Stereo (TWS) allows you to connect two ANNY® 8 speakers together to enjoy your music in stereo - a quick upgrade to provide parties and events with impressive sound.Don't worry, you can turn up the volume on your ANNY, because the integrated DynX® DSP (Gen.2) produces a distortion-free, clean and powerful sound even at maximum volume.Thanks to the energy-saving ECO preset, ANNY can be used for background music or voice-only applications for a particularly long time. At medium volume, this mode enables continuous operation for up to 11 hours. For your party with the volume fully turned up, the battery lasts up to an impressive 3.5 hours in the MUSIC preset when fully utilised. With the optionally available spare battery, the playing time can be extended accordingly; simply replace the empty battery with a fully charged spare battery and you're ready to continue.To ensure that your mobile phone or tablet is always ready for use, you can place it in the integrated holder and charge it via the USB-C port on the back of the ANNY.If you travel a lot with your ANNY 8, the ANNY 8 BACKPACK, available as an accessory, is the ideal transport backpack with versatile carrying options: Shoulder strap, rucksack straps and carrying handle. The water-repellent backpack offers additional storage space and reliably protects your ANNY 8 in wind and weather.So, go out and create unforgettable moments. With ANNY by your side, you'll create a great atmosphere and first-class sound - wherever you are.

This ANNY® receiver module enables an ANNY® wireless microphone to be retrofitted by inserting it into a free receiver module slot of the ANNY® loudspeaker. It receives the frequency range of 470 - 490 MHz with the frequency band B4.7. A dedicated volume control on the module allows the volume to be customised, while the mute level control effectively eliminates noise and interference from weak signals. Radio signals can be received up to a distance of 80 metres using the supplied antenna with TNC connection. Synchronisation of the receiver with the matching ANNY® bodypack transmitter or wireless handheld microphone is simple and convenient via infrared.

The ANNY® wireless dynamic handheld microphone with cardioid capsule. With an output power of 10 mW, the wireless microphone enables audio transmission of up to 80 metres. Synchronisation of the microphone with the ANNY® receiver is simple and convenient via infrared. ANNY MD is powered by two AA batteries (included) and lasts up to eight hours without changing batteries. An integrated status LED lights up white when switched on and red when the battery is low.

For bands and DJs, column systems have triggered a true revolution in numerous areas of application. It has never been easier to provide even large rooms with uniform sound using a small and unobtrusive PA system. With the MAUI 44 G2, the professional segment is now also being served with these practical and powerful sound reinforcement systems.The MAUI 44 G2 from LD-Systems is the flagship of the column PAs from the MAUI series and offers a generous 1,500 watts of total power (RMS) with a frequency response of 37 Hz to 20 kHz and a sound pressure level of 132 dB (peak). With its outstanding sound characteristics and versatile functions, this compact column PA is recommended for hire companies, musicians, small clubs, street festivals and permanent installations. The cardioid properties of the column elements and the option of using an additional subwoofer to achieve a cardioid application in the bass range also emphasise the professional standard of this sound system. A rear attenuation of 18 dB is achieved with the column and 15 dB with the subwoofer. The MAUI 44 G2 also sets the tone when it comes to equipping the two-part column with twelve 3.5" neodymium full-range speakers and four 1" HF drivers with waveguide. The phase plugs on the six upper drivers improve the horizontal directivity, reduce the distortion factor and optimise the sensitivity below the crossover frequency for the tweeters. In addition, the four tweeters feature specially designed and optimised compression drivers connected to a constant directivity waveguide, providing 120° of width coverage and 25° of focused vertical directivity. The curved design of the waveguide transports more energy in the high frequencies to listeners who are further away.The TrueWireless™ stereo function makes work much easier for fixed installations or conference sound reinforcement. This technology enables the wireless connection of two systems for stereo playback. Bluetooth® streaming in HD quality is possible without any problems thanks to aptX™ and AAC coding and the DynX® DSP technology guarantees distortion-free sound reproduction even at the highest volumes. The overall and subwoofer levels can be individually adjusted, enabling a perfectly balanced sound with crystal-clear highs, crisp mids and, thanks to the flow-optimised bass reflex channels, particularly powerful bass in every situation.Another particularly user-friendly feature is the automatic setup recognition of the MAUI 44 G2: if, for example, the column is removed in order to use the subwoofer as a slave, the display automatically switches to SLAVE and functions such as Bluetooth and the volume controls for MAIN and SUB are no longer displayed.The MAUI 44 G2 is also top class when it comes to transport and mobile use. It can be set up quickly and easily without cables or stands using special multi-pin connectors. Together, the robust subwoofer enclosure made of birch multiplex with polyurea coating and the lightweight, powder-coated aluminium column weigh less than 48 kg. Compared to the previous model, the weight has been reduced by 20 %. The optionally available transport roller board, the transport bag and the sub cover provide excellent service in everyday use.On the input side, the MAUI 44 G2 offers two XLR IN connections. Two XLR outputs enable the wired stereo configuration of two systems. An additional subwoofer can be connected via the SUB OUT and power is supplied safely and reliably via a PowerCon connection.

Stinger® 8" passive models can be precisely aligned with this wall bracket. It is made of powder-coated steel and can be precisely aligned horizontally and vertically. The swivelling range is 160° wide and the downward tilt of the loudspeaker is infinitely adjustable up to 40°. The wall plate is a solid 5 mm thick and equipped with an eyelet for safety ropes in accordance with BGV C1.

Developed in Germany, the UHF diversity radio systems in the U300® series offer impressive audio performance. They achieve a range of 100 m in ideal conditions and are available for operation in 5 frequency bands: 584 MHz - 608 MHz, 655 MHz - 679 MHz, 823 MHz - 832 MHz + 863 MHz - 865 MHz, 470 MHz - 490 MHz or 514 MHz - 542 MHz. Six U300® systems can be used simultaneously. Convenient one-touch synchronisation of transmitter and receiver via infrared ensures a fast, trouble-free radio connection, and the squelch with pilot tone ensures interference-free operation.The U300® transmitters have an output power of 10 mW and run for 10 hours on two AA batteries. The frequency response of the handheld microphone ranges from 55 Hz - 16 KHz, and with a lower cut-off frequency of 25 Hz, the bodypack is also suitable for transmitting 5-string bass guitars with a low B-string. The input level of the bodypack can be adjusted in three stages to suit both active and passive guitars and basses, and the practical standby position of the operating switch allows temporary muting. The U300® receiver is equipped with a bright LCD channel display, an LED chain to indicate the audio signal strength and two balanced XLR and two unbalanced 6.35 mm jack outputs. The jack output can be switched to instrument level for direct connection to guitar and bass amplifiers.The wireless systems in the U300® series have a fresh, modern look and are available with receivers and two dynamic cardioid handheld microphones (HHD2) or with two bodypacks and two headsets (BPH2). The replacement capsules from the U500® series can be used to change the handheld microphone characteristics.

Compact, powerful and uncomplicated - a column PA is and remains the ideal partner for DJs and small bands. The MAUI series from LD Systems epitomises the all-in-one concept in its purest form and offers an unbeatable PA package of sound, design, technology and handling. Set up, connect, done!The MAUI 11 G3 W delivers a large, powerful and precise sound with 730 W RMS power (1,460 W peak), which is convincing in all applications: as a main PA for concerts, as a sound system for mobile DJs or as a sound system at weddings, company parties and other events.With its elegant design, the MAUI 11 G3 W looks particularly harmonious. The two aluminium column elements in the MAUI G3 series are located at the front edge of the subwoofer, which further enhances the seamless visual impression. The columns contain 6 x 3.5'' midrange drivers which, in combination with the innovative phase plug design and the 2 x 1'' tweeters, ensure even sound distribution with constant horizontal dispersion. In addition, the BEM-optimised waveguide in front of the tweeters transports the high frequencies to the rear audience areas.The crossover point, the transition between the mid-range and tweeter speakers, has also been optimised to reduce harmonic distortion and cancellations and make the sound even more transparent and powerful. The result: a particularly precise reproduction of vocals and instruments over the entire 120° x 30° dispersion range.The columns of the MAUI 11 G3 W are designed as cardioid speakers. This ensures controlled low-mid frequencies at the front and attenuation of up to 18 dB at the rear, as well as a clean stage sound field.With the two larger 8" chassis and the four bass reflex ports, the audibly more powerful subwoofer reproduces bass down to 39 Hz clearly and powerfully. When using a second subwoofer, the bass range can be boosted by 6 dB and operated in cardioid configuration at the touch of a button (preset). In addition, the extremely hard-wearing polyurea coating of the subwoofer can easily withstand even the toughest demands on the road.The MAUI 11 G3 W is a real sound machine, but also impresses with its practical features for everyday use by DJs, musicians and technicians. Thanks to Bluetooth 5.0 and AAC coding, the column PA becomes a versatile sound system. Transport is simple as usual, while the improved, invisible connectors between the elements provide increased stability during set-up - nothing can upset the MAUI so easily...

The new Stinger series from LD Systems continues along the path that was already very successfully started with the previous models.Robust speakers suitable for everyday use in a reasonable quality with an exceptional price/performance ratio. The active speakers cut a fine figure in full-range, monitor or satellite mode. Thanks to the integrated flying points and numerous accessories, they are also suitable for installations.

This ANNY® receiver module enables an ANNY® wireless microphone to be retrofitted by inserting it into a free receiver module slot of the ANNY® loudspeaker. It receives the frequency range of 470 - 490 MHz with the frequency band B4.7. A dedicated volume control on the module allows the volume to be customised, while the mute level control effectively eliminates noise and interference from weak signals. Radio signals can be received up to a distance of 80 metres using the supplied antenna with TNC connection. Synchronisation of the receiver with the matching ANNY® bodypack transmitter or wireless handheld microphone is simple and convenient via infrared.

Stinger® 10" models can be precisely aligned with this wall bracket. It is made of powder-coated steel and can be precisely aligned horizontally and vertically. The swivelling range is 160° wide and the downward tilt of the loudspeaker is infinitely adjustable up to 40°. The wall plate is a solid 5 mm thick and equipped with an eyelet for safety ropes in accordance with BGV C1.

The ICOA PRO 12 A combines the sonic precision of a true coaxial system with the flexibility of a compact 12" loudspeaker. Its professional full-range performance and robust design make it exceptionally versatile and ideal for a wide range of applications, from club gigs to live events and permanent installations.The coaxial design combines the custom-built 12" woofer with the 3" voice coil and 3" titanium tweeter driver to create a true point source. The common motor design also ensures improved coherence and time alignment of the audio signal. The result is a particularly natural and detailed reproduction.The rotatable, BEM-optimised horn ensures precise dispersion characteristics and simultaneously provides horn loading for the woofer and tweeter. This double horn loading enables precise focussing of the sound waves deep into the mid-range (approx. 600 Hz) and offers a decisive advantage in acoustically demanding environments, as the sound energy arrives exactly where it is needed.Thanks to its flow-optimised bass reflex ports, the ICOA PRO 12 A delivers a solid low-end down to 53 Hz and thus an impressive full-range experience. The powerful Class D power amplifier delivers up to 1000 W RMS (2000 W PEAK), 133 dB max. SPL and therefore sufficient headroom when powerful, distortion-free sound is required.The modern SysCore® DSP with FIR/IIR filters and advanced limiters guarantees distortion-free sound and safe operation with maximum clarity and punch - even at the limits.Various signal sources can be connected and routed via two line/mic input channels and an XLR mix output.Four application presets (including a low-latency monitor), a delay function and parametric 4-band EQs for the input and master channels enable precise settings.The whole thing is rounded off by the intuitive menu navigation via the colour display with one-knob control and the free "ICOA PRO" app.All settings can be adjusted quickly and wirelessly via the app and multiple speakers can be linked together. A stereo setup with up to two tops and four subs, including direct music streaming via Bluetooth 5.1 and TWS, can be set up and ready for use in the app in just a few seconds. A status LED on the front of the subwoofer enables easy identification and provides information on the intervention of the limiter if required.The robust ABS housing with steel reinforcement, the stable front grille and the 50° tilt angle make the ICOA PRO 12 A an excellent floor monitor. Four ergonomic carrying handles also ensure optimum support during set-up and dismantling.When used with a tripod, a tilt angle of 0° or 5° can be selected. Whether vertical or horizontal, the rotatable horn and the numerous mounting options, such as 6 x M10 flying points and the EasyMount® truss mount, enable flexible use in a wide variety of environments.This makes the ICOA PRO 12 A the perfect companion as a versatile tool for all event and installation applications.Custom-fit protective covers with additional storage space in a water-repellent and padded design are available as accessories for safe use and transport.

Developed in Germany, the UHF diversity radio systems in the U300® series offer impressive audio performance. They achieve a range of 100 m in ideal conditions and are available for operation in 5 frequency bands: 584 MHz - 608 MHz, 655 MHz - 679 MHz, 823 MHz - 832 MHz + 863 MHz - 865 MHz, 470 MHz - 490 MHz or 514 MHz - 542 MHz. Six U300® systems can be used simultaneously. Convenient one-touch synchronisation of transmitter and receiver via infrared ensures a fast, trouble-free radio connection, and the squelch with pilot tone ensures interference-free operation.The U300® transmitters have an output power of 10 mW and run for 10 hours on two AA batteries. The frequency response of the handheld microphone ranges from 55 Hz - 16 KHz, and with a lower cut-off frequency of 25 Hz, the bodypack is also suitable for transmitting 5-string bass guitars with a low B-string. The input level of the bodypack can be adjusted in three stages to suit both active and passive guitars and basses, and the practical standby position of the operating switch allows temporary muting. The U300® receiver is equipped with a bright LCD channel display, an LED chain to indicate the audio signal strength and a balanced XLR and unbalanced 6.35 mm jack output. The jack output can be switched to instrument level for direct connection to guitar and bass amplifiers.The wireless systems in the U300® series have a fresh, modern look and are available as vocal sets with a receiver and a dynamic cardioid handheld microphone, bodypack and headset or bodypack and lavalier microphone. The replacement capsules from the U500® series can be used to change the handheld microphone characteristics. U300® instrument sets are available with a bodypack and clip-on microphone for wind instruments or a double-shielded low-capacitance cable for guitars and basses.

The patented CURV 500® AV set feels at home wherever music is played: in bars, clubs, studios and even at home as a home entertainment system. With 380 watts of RMS power and a maximum sound pressure level of 122 dB, the CURV 500® AV set can remain discreetly in the background, but can also rock out with a vengeance.The basis is the 10 bass reflex subwoofer with Class D amplification, limiter, protection against short circuits, overheating and overvoltage as well as a 4-channel mixer with 16 digital effect presets and Bluetooth®. Combo and speakON-compatible sockets offer extensive connection options. The subwoofer also has four digital system presets, an M20 threaded flange and three ergonomic carrying handles.The two satellites are each operated via SmartLink® adapters. The 12 x 12 x 12 cm elements with LD Systems' own WaveAhead® technology each contain one 4" and three 1" drivers for coherent and extremely detailed reproduction with high pressure and dynamics.With optional wall and ceiling mounting systems, the satellites can be permanently installed wherever good sound and a discreet appearance are required. For even more power, a total of eight array satellites can be operated in stereo mode (max. four per side).In addition to the subwoofer with mixer unit and two satellites, the CURV 500® AV set also includes two SmartLink® adapters and two speaker cables.

This full-range loudspeaker also impresses with its excellent sound in the low frequency range. The ICOA 15 A from LD-Systems is a true all-rounder and offers a unique range of functions for its class. Thanks to its coaxial design and rotatable, BEM-optimised CD horn as well as the extensive and precisely tuned DynX DSP presets, the active 15" loudspeaker can be used extremely flexibly.The excellent bass reproduction of the horn-loaded woofer makes the LD ICOA 15 A the ideal choice for musicians, bands, entertainers and dance schools. DJs can also use it without a subwoofer. The speaker is convincing vertically as a satellite, horizontally in flown systems or as a floor monitor. The efficient Class D power amplifier delivers 128 dB max. and 300 W RMS power.Thanks to LD-Systems' DynX DSP technology, the speaker delivers a perfect performance with maximum clarity and punch under all conditions. 4 presets as well as a 3-band EQ and a delay function allow the sound to be optimally adapted to the respective conditions.Various signal sources can be connected via 2 line/mic input channels with individual gain controls plus mono mix output.With its shockproof front grille and ideal tilt angle of 55°, the LD ICOA 15 A also cuts an excellent figure as a floor monitor. When used vertically, the 36 mm dual-tilt stand mount allows a tilt angle of 0° or 5° to be selected and the system to be optimally adapted to the respective sound reinforcement situation.Extensive and clever accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic, rubberised surface ensure optimum grip when carrying the speaker.