With the universal power adapter from LogiLink, you can charge a wide range of devices - from digital cameras and mobile devices to routers and games consoles - with the same charger. Simply attach the appropriate adapter and you're ready to go. Ideal as a reliable replacement or second power supply unit for the home or office. The additional USB port directly on the power adapter allows you to charge another 5V device such as a mobile phone at the same time. All-round protection: Overcurrent, overvoltage, overheating and short-circuit protection.
The PG-X Type F is a rackmount power conditioner/surge protector with 7 outlets and PG-90 filter technology, 6 rear-switched, filtered and surge-protected outlets, a front-switched convenience outlet and a USB port for charging devices.
The PCONS cables with a straight Schuko plug and a type A powerCON connector are particularly suitable for events. The robust H05VV-F 3G1.50 cable has a maximum load capacity of 20 amps and the entire cable complies with protection class IP20. The powerCON is a plug connector and not a plug-in device, which means that the powerCON plug must not be plugged in or unplugged either under load or under voltage.
Two Powercon plugs on one cable (blue for power in and grey for power out) if Speakon connections are available on both sides for the power supply of active speakers in professional stage applications. This task for event technicians is mastered with the CFCA FCB.
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.
The PCONS cables with a straight Schuko plug and a type A powerCON connector are particularly suitable for events. The robust H05VV-F 3G1.50 cable has a maximum load capacity of 20 amps and the entire cable complies with protection class IP20. The powerCON is a plug connector and not a plug-in device, which means that the powerCON plug must not be plugged in or unplugged either under load or under voltage.
The PT..-BA cable connects powerCON A to B connectors and fulfils protection class IP20. It is suitable as a daisy chain cable for LED bars and sticks, for example. The powerCON is a plug connector and not a plug-in device, i.e. it must not be plugged in or unplugged either under load or under voltage.