Black Lion Audio PG-X Type F
€189.00
card.manufacturer:
The PG-X Type F is a rackmount power conditioner/surge protector with 7 outlets and PG-90 filter technology, 6 rear-switched, filtered and surge-protected outlets, a front-switched convenience outlet and a USB port for charging devices.
PCE St. Anton mobile plastic distributor 400 V with 16 A plug (3x Schuko socket outlet)
€69.00
card.manufacturer:
Logilink universal power supply 3-12V, 24W
€16.90
card.manufacturer:
With the universal power adapter from LogiLink, you can charge a wide range of devices - from digital cameras and mobile devices to routers and games consoles - with the same charger. Simply attach the appropriate adapter and you're ready to go. Ideal as a reliable replacement or second power supply unit for the home or office. The additional USB port directly on the power adapter allows you to charge another 5V device such as a mobile phone at the same time. All-round protection: Overcurrent, overvoltage, overheating and short-circuit protection.
IEC LOCK mains cable lockable 3x1.0 5m black
€16.50
card.manufacturer:
The IEC lock mechanism prevents the IEC plug from being pulled out accidentally. Thanks to this innovation, the plug remains securely in the installation socket at all times - even in the event of vibrations or other disturbances in the event technology sector. This guarantees a reliable and stable connection.
Cordial CPH 10 DMX 1-5 PWR 1 K
€109.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
RME LNI-2 DC
€529.00
card.manufacturer:
With the LNI-2 DC, RME presents an active DC filter in a compact and portable housing. The LNI-2 DC separates, regenerates and filters the output signal of any 12 volt DC power supply, thereby ensuring a significant improvement in DC voltage stability and an extremely clean 12V voltage supplysupply. The result is an optimised audio signal and sound without hum, buzz and other noise that can occur from both power supplies and a contaminated mains supply.The LNI-2 DC's operation is based on two key features: galvanic isolation and RME'sexclusive filter. The galvanic isolation significantly reduces the leakage current component that is common in switching power supplies, while at the same time the capacitive coupling between input and output is reduced from typically 1 nF (nano-farad) to less than 35 pF (pico-farad) to prevent noise caused by the leakage current.The filter of the LNI-2 DC consists of a discrete linear regulator with extremely low noise (only a few micro-volts), soft-start, overload and overheating protection as well as sensor technology.The LNI-2 DC works with power sources from 9V-18V DC (input) and always delivers a constant, perfect voltage of 12.0V with 2A at its lockable output. This is ensured by the filter's integrated sensor technology, which checks and compares the output voltage directly at the DC plug of the special 4-core cable supplied, thus completely eliminating load-dependent voltage drops.The two two-colour status LEDs on the top of the device indicate the presence of input and output voltage as well as overload. In addition, it is possible to connect the earth of the DC voltage output to the protective conductor, earth or another device earth via an earthing screw (GND screw terminal) in order to solve problems with the earth wiring.
Cordial CPH 3 DMX 1-5 PWR 1
€72.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CPH 10 DMX 1 PWR 1 TRUE 1
€109.00
card.manufacturer:
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.
IEC LOCK mains cable lockable 3x1.0 1m black
€7.50
card.manufacturer:
The IEC lock mechanism prevents the IEC plug from being pulled out accidentally. Thanks to this innovation, the plug remains securely in the installation socket at all times - even in the event of vibrations or other disturbances in the event technology sector. This guarantees a reliable and stable connection.
Cordial CPH 1.5 DMX 1-5 PWR 1
€59.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CPH 3 DMX 1 PWR 1
€67.00
card.manufacturer:
The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CPH 5 DMX 1-5 PWR 1
€85.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.