Palmer
Contact:
Adam Hall GmbH
Adam-Hall-Str. 1
61267 Neu-Anspach
E-mail: info@adamhall.com
Web: https://www.adamhall.com/
Palmer PAN 01
€41.63
card.manufacturer:
High-quality passive DI box, can also process loudspeaker levels. Rationalised production has made it possible to offer PALMER quality at extremely competitive prices. Jack input with parallel output for looping through the signal.
Palmer RIVER naab
€185.00
card.manufacturer:
If you connect a laptop to a sound system, the sound often leaves a lot to be desired. There is humming and rumbling, and sometimes there is also a loss of sound in the bass and treble. The Palmer naab, a two-channel media DI box, provides a reliable remedy.Using switches for ground lift and soft lift as well as the internal isolating transformers, hum loops can be prevented. The transformers also ensure optimum level and impedance matching. The result is clean, brilliant sound without noise.The Palmer naab is two-channel, but can be switched to mono if required, which is often very useful in practice so that a signal is not only heard on one side of the sound system. The mono sum signal is then available at both XLR outputs simultaneously; the naab can therefore also be used as a split box.There is a wide range of connections on the input side: 2 x 6.3 mm jack sockets, which can be balanced or unbalanced, as well as 2x RCA and 1x mini jack (stereo). This eliminates the need for error-prone adapter cables - which you always forget to take with you anyway! The outputs are designed as professional XLR sockets; their balanced wiring also allows longer cable runs without interference.Due to its passive operation, the Palmer naab does not require a power supply; this makes it extremely fail-safe, especially as the robust metal housing can take a beating. The Palmer naab is the ace up the sleeve for every lecture traveller, sound engineer and sound reinforcement specialist.
Palmer PAN 04 Passive DI Box Stereo
€85.00
card.manufacturer:
The PAN-04 contains twice the inner workings of a PAN-01 in one housing, making it a 2-channel passive DI box. Thanks to its "stereo" design, it is therefore predestined for the miking of corresponding keyboards and devices with multiple outputs.
Palmer PAN 02
€66.00
card.manufacturer:
Standard active DI box. Can be operated via 9V battery or 48V phantom power. High impedance input, higher output level than a passive DI box. The active circuit enables the high input impedance of 1 MOhm and greater sensitivity of the input signal. (Typical difference between input and output -4 dB). The maximum output voltage with phantom power is +10 dBu. Output: transformer-balanced. Thanks to a special "floating ground" circuit, the ground lift switch also works with phantom power. Sheet steel housing 110 x 73 x 42 mm.
Palmer ABO
€69.00
card.manufacturer:
The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to two different inputs.If you switch your vocal microphone between FOH and monitor mixer on stage, you can communicate something to the monitor mixer or even the band.Two different sound settings: You sometimes want to have a different effect or sound on your microphone, for example a "phone effect" or more reverb. Connect both outputs of the PEABO to two channels of the mixer and set them differently. Now you can switch back and forth between the two channels on stage as you wish.You can use the PEABO to address two different rooms or zones.Switching is done via a solid foot switch, a red LED indicates which output is selected. Output A can be attenuated by 15 dB and output B by 6, 15 or 21 dB via a slide switch. A ground lift switch helps to avoid ground loops. The PEABO is housed in a solid all-metal enclosure with protruding cheeks for optimum protection of the inputs and outputs. Pre-drilled holes allow easy and secure mounting in a rack or on a pedalboard.The PEABO is completely passive, only a 9 volt block battery is required to power the LED.
Palmer PAN 03 Passive
€189.00
card.manufacturer:
Passive 4-channel DI BOX in 19" housing. Each channel has a jack input with parallel output for looping the signal through. An attenuation switch (-30dB) allows the optional connection of line or loudspeaker signal. The technical data is identical to the PAN 01. All connections and switches are located on the 1 U front panel, the XLR output is also available as a parallel socket on the rear. 19"/1 U housing, 90 mm deep.
Palmer PAN 16
€269.00
card.manufacturer:
The Palmer PAN16 is an 8-channel passive DI box in 19" rack format with 1 U. Thanks to the special MERGE LINK/IN function, the front LINK output can be switched as a second input for looping through the signal, whose signal is fed to the output as a mono sum with that of the INPUT socket. The PAN16 offers a maximum of 16 inputs, two PAD buttons allow 10, 20 and 30 dB attenuation. The outputs are designed as XLR sockets and are galvanically isolated and balanced by transformers. There are also 8 additional LINK sockets on the rear of the device.
Palmer PAN 08
€369.00
card.manufacturer:
The PAN08 from Palmer has 4 channels, each of which can be used as an active DI box, line isolation box or catch-up amplifier. The input combo socket (jack / XLR) accepts both balanced and unbalanced input signals. The output is transformer-balanced with a double XLR socket (front and rear).The signal level can be reduced by 20 dB for microphone inputs and, if necessary, increased by 18 dB in 3 switchable stages for LINE inputs. With an output level of +12 dBu at 600 O load at 0.05 % THD/40 Hz and an output noise of less than -110 dBu, the device also fulfils high professional demands. A special feature is the rechargeable battery power supply. The supply voltage can be 9-18 V. This means that the PAN08 can also be used independently of the mains in outdoor operation.
Palmer Y-BOX
€109.00
card.manufacturer:
"When I connect the inputs of my two amplifiers together, there is a lot of humming." This or similar questions are often asked in the technology section of specialist magazines. The Palmer Y-Box offers the solution to this problem. An FET input circuit converts the high-impedance guitar signal and simultaneously forms the driver circuit for a transformer, which routes the signal to the output without grounding - thus eliminating a hum loop. Operation with a 9V battery is recommended.The PGA03 Y-Box can also be used as a cable driver for long cable lengths. In addition, the signal from output AMP2 can be switched out of phase, which is usually necessary when connecting two preamps or integrated amplifiers in parallel.
Palmer Pro RMMS 8
€311.00
card.manufacturer:
The PRMMS8 is an extremely low-noise 19" microphone splitter with 8 balanced XLR inputs, each routed to a direct output and a transformer-isolated output. Four LINK switches on the front panel allow two channels to be combined for flexible use. This allows an input signal to be routed via four outputs to mixing consoles for FOH, monitoring, recording and wireless transmission or to combine two input signals into one output signal. Condenser microphones can be supplied with phantom power via the direct outputs. Each channel is equipped with a ground lift to prevent ground loops and interference caused by double earthing of connected power supplies.
Palmer PAN 03 Active
€275.00
card.manufacturer:
19" DI box 4 channel activeActive 4-channel DI BOX in 19" housing. Each channel has a jack input with parallel output for looping through the signal. An attenuation switch (-30dB) allows the optional connection of line or loudspeaker signal. The technical data is identical to the PAN 02, but the PAN 03 is generally mains-powered. All connections and switches are located on the 1 U front panel, the XLR output is also available as a parallel socket on the rear panel. 19"/1 U housing, 90 mm deep