Cordial CDX 1-2 1m
€35.00
card.manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
Adam Hall DMX cable adapter XLR 5 F - XLR 3 M
€6.00
card.manufacturer:
24 AWG cables may be used for distances of up to 300 metres. For longer distances, or if more than 32 devices are to be supplied by one data line, we recommend using the Martin Optosplitter.Terminating resistor The data line must be terminated with a 120 Ohm resistor between Signal+ and Signal-. This is very important for error-free data transmission. When using a splitter, each data line must be terminated. The easiest way to terminate a data line is to use a termination plug (120 Ohm resistor between pins 2 and 3) on the data output of the last device on the data line.
Adam Hall DMX cable adapter XLR 5 M - XLR 3 F
€5.90
card.manufacturer:
24 AWG cables may be used for distances of up to 300 metres. For longer distances, or if more than 32 devices are to be supplied by one data line, we recommend using the Martin Optosplitter.Terminating resistor The data line must be terminated with a 120 Ohm resistor between Signal+ and Signal-. This is very important for error-free data transmission. When using a splitter, each data line must be terminated. The easiest way to terminate a data line is to use a termination plug (120 Ohm resistor between pins 2 and 3) on the data output of the last device on the data line.
Cordial CDX-2 3m
€39.00
card.manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
Cordial CDX-2 5m
€45.00
card.manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
Cordial CDX-2 2m
€35.00
card.manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
Cordial CPH 5 DMX 1 PWR 1 TRUE 1
€85.00
card.manufacturer:
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.
Cordial CDX-2 10m
€53.90
card.manufacturer:
Lighting technicians and technical service providers looking for a high-quality DMX cable with 5-pin connectors and 5-pin cable assignment will find the CDX-2 to be a reliable partner for the long term.The inner workings of the CDMX-2 cable by the metre are protected from interference by a foil pair shield and a tinned copper wire braid.The CDX-2 fulfils the EIA 485 standard and DMX 512 specification. In order to withstand any load in the best possible way, Cordial paid attention to a particularly high tensile strength during development. This means that nothing can go wrong with the lighting control cable. A transparent shrink sleeve is attached to each end for individual cable labelling.Note the logic of the DMX standard: it is the reverse of the XLR logic in the audio sector. With DMX, there is a female plug on the transmitter and a male plug on the receiver.
Cordial CPH 1.5 DMX 1 PWR 1 TRUE 1
€59.00
card.manufacturer:
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.
Cordial CPH 3 DMX 1 PWR 1 TRUE 1
€72.00
card.manufacturer:
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.