Cordial CPH 3 DMX 1-5 PWR 1
€72.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CPH 10 DMX 1 PWR 1 TRUE 1
€109.00
card.manufacturer:
As a hybrid solution suitable for stage use, the CPH DMX 1 PWR 1 TRUE1 combi cable combines a mains cable and a DMX cable.For stage or studio use, an optimum power supply is guaranteed by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The NEUTRIK® PowerCON TRUE1 plug used has 3 important features for professional use: it can be locked, can be loaded with up to 16 amps at 230V and can be connected and disconnected under voltage and load.The split of the cable is 30 cm.
Cordial CPH 1.5 DMX 1-5 PWR 1
€59.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CPH 3 DMX 1 PWR 1
€67.00
card.manufacturer:
The CPH DMX 1 PWR 1 combination cable contains a mains cable and a DMX cable in a hybrid solution.According to DMX logic, the male plug is located on the receiver and the female plug on the transmitter (opposite to the approach used for XLR in the audio sector).Optimum power supply when using the hybrid on stage or in the studio is ensured by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CPH 5 DMX 1-5 PWR 1
€85.00
card.manufacturer:
Of course, time is a crucial factor during stage construction. Time must be saved, because it is limited and costs money. Cordial has developed the CPH DMX 1-5 PWR 1 to help equipment hire companies and event organisers with this issue.The hybrid cable combines the power supply with NEUTRIK® powerCON Power-In/Power-Out and a DMX cable with NEUTRIK® 5-pin XLR male/female connectors. For the use of LED walls, DMX-controlled spotlights and dimmer packs, for example, a precise 110 Ohm characteristic impedance cable was selected to generate a loop-through connection.In contrast to XLR in the audio sector, there is a female plug on the transmitter and a male plug on the receiver, in accordance with the logic of the DMX standard. The 5-pin f/m XLR plugs are 3-pin. For the power supply, the DMX/power combination cable is supplemented by a 3x 1.5 mm2 mains cable and a balanced AES/EBU cable.The split of the cable is 30 cm.
Cordial CDX MN 3 Quad-DMX 0.7m
€79.00
card.manufacturer:
The Ethercon QUAD DMX-AES/EBU adapter utilises one pair of wires of a common 4-pair CAT cable and thus enables the cost-efficient transport of four parallel DMX or AES/EBU signals.It is fitted with black Male NEUTRIK® XLR metal connectors in 3-pin design. The individual cables are TIA 568 A colour-coded and terminate after a 70 cm split in a special metal cable socket with strain relief and kink protection based on the well-known NEUTRIK® NE8FF.We recommend network cables with at least one overall shield for the long distances in between. Distances of up to 150 metres are possible when using the high-quality CORDIAL CCAT 7A LONG RUN with a wire gauge of AWG 23.An ingenious solution for rental companies and event technology service providers in the "audio and video over IP" sector to extend the utilisation possibilities of high-quality network cable reels.
