Adam Audio

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° towards the user's ears. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass/midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

The T7V is a nearfield studio monitor and is designed as a vertically orientated 2-way system. The T7V has a 7" woofer that enables bass reproduction down to 39 Hz, while the cone of the U-ART tweeter offers an unadulterated and extended high frequency range of up to 25 kHz. The U-ART tweeter is fitted with a precision waveguide that has the same excellent dispersion characteristics as the High Frequency Propagation (HPS) waveguide used in the S-Series studio monitors. The very even reproduction of the high frequencies by the waveguide ensures an incredibly wide sweet spot, which saves you from having to remain in a fixed position while working.The metal rear panel of the T7V houses the bass reflex port as well as numerous controls and analogue connections. The U-ART tweeter is powered by a 20 W amplifier, while a 50 W amplifier drives the woofer. This powerhouse in a slim cabinet delivers an impressive maximum sound pressure level of 110 dB SPL per pair.The T7V's wide frequency response, wide dynamic range, excellent transient response, wide sweet spot and small footprint make it ideal for use in small control rooms for music production, video post-production and broadcast - an interesting option for the limited budgets that many facilities have to work with.The ADAM Sub8 subwoofer is the perfect complement to the T7V to extend the possibilities of low frequency monitoring.

The T5V is an extremely budget-friendly 2-way nearfield monitor and has been optimised for use in smaller control rooms.The T5V has a 5" woofer that enables bass extension down to 45 Hz. The new U-ART offers a pristine and extended high frequency response of up to 25 kHz and represents a groundbreaking solution for high-resolution recordings and mixes on a tight budget. The U-ART tweeter features a precision waveguide with the same excellent dispersion characteristics as the High Frequency Propagation (HPS) waveguide used in the S-Series studio monitors. The very even reproduction of high frequencies by the waveguide ensures an incredibly wide sweet spot, which saves you from having to remain in a fixed position while working.A new cabinet with a small footprint, bevelled edges and a bass reflex port on the rear allows placement anywhere in the room, no matter how small. The T5V also features DSP-controlled crossovers and equalisers as well as analogue connection options (XLR/cinch). Powered by a 50 W Class-D amplifier for the woofer and a 20 W Class-D amplifier for the U-ART tweeter, the T5V achieves impressive peak levels of 106 dB SPL per pair. With its excellent acoustic properties, small dimensions and outstanding price/performance ratio, this studio monitor is very well suited for use in small control rooms for music production, video post-production and broadcasting.If you need even more bottom end: the T5V is compatible with the ADAM Sub7 and Sub8 subwoofers.

In terms of performance data, the A44H and the A7V are very close to each other. However, the A44H offers a very interesting housing variant: with its horizontal driver arrangement and a width of exactly 19 inches, the A44H can be placed perfectly on a studio rack as well as above or below a monitor or screen. This design is also ideal for use as a centre speaker in a 5.1, 7.1 or 3D monitor configuration. Two 4-inch long-throw woofers and an X-ART tweeter enable a wide frequency range. The DSP functions offer individual sound customisation options.

The A-Series Monitor A7V is the successor to ADAM Audio's award-winning bestseller A7X. The A7V 2-way speaker is equipped with a newly developed 7-inch woofer - made from a multi-layer mineral fibre material (MLM) - and ADAM Audio's handcrafted X-ART tweeter. The A7V achieves a frequency range of 41 Hz to 42 kHz, a rotatable HPS waveguide and the integrated DSP technology allow optimal customisation to individual room conditions and personal sound preferences. For many artists, mixers and producers, the A7V will be the preferred speaker within the new A-Series.

ALWAYS IN THE SWEET SPOTThe H200 is a versatile closed-back headphone that has been developed from the ground up, capitalising on ADAM Audio's 25 years of experience as a manufacturer of monitoring solutions. Its modern yet unobtrusive product design brings style to any working environment without compromising on functionality or audio quality.The headphones' PEEK driver and acoustic housing deliver the exceptional sound quality for which ADAM Audio is renowned, while the lightweight, sophisticated construction ensures a comfortable fit and good sound isolation. The replaceable headband padding, interchangeable memory foam ear pads, detachable main cable and overall rugged construction ensure long life even in the harsh studio environment. A high-quality carrying case allows for convenient transport.A clear added value of the H200 is the specially designed DAW plug-in ADAM Audio Headphone Utility. The included software offers a range of optimisation tools for the H200 as well as a spatialisation function that uses advanced crossfeed techniques to implement an improved simulation of human spatial perception.

The Sub8 is a powerful active subwoofer with small dimensions that extends the playback range to below 30 Hz and can be customised in many ways to suit the acoustic conditions.It contains a special long-throw 8.5" chassis, which is driven by a powerful magnet and a 38 mm voice coil. ICE modules are used as amplifiers, which combine high performance with minimal heat generation and can easily cope with high loads over long periods of time.There are control options for volume (-60 to +6 dB) and phase switching (180°). Furthermore, the upper cut-off frequency of the subwoofer can be variably adjusted (50 - 150 Hz). A filter can be switched on for the satellite outputs, which blocks the signals from the satellites below 85 Hz, for example to reproduce a film soundtrack in accordance with Dolby® and relieve them of the low frequencies. It is also possible to either switch the subwoofer on or off manually or have it switch on automatically as soon as it receives signals (signal-on/continuous).The remote control supplied allows these controls to be set conveniently from the listening position.

The S3H builds on the success of ADAM Audio's best-known studio monitors, the S3A and S3X-H, and also sets new standards in terms of technical innovation in the field of electro-acoustics.The two 7-inch bass woofers, equipped with new ELE and SMA technology, each driven by powerful, separate 500 W Class-D amplifiers, offer perfect reproduction of frequencies down to 32 Hz. ADAM Audio's newly developed DCH midrange driver, a 4-inch hybrid of dome and cone midrange drivers, is powered by a 300 W Class-D amplifier and is responsible for frequencies between 250 Hz and 3 kHz. The state-of-the-art hybrid design combines the sonic advantages of dome and cone drivers in a unique way and ensures excellent dispersion in the often critical mid-frequency range. The frequencies above 3 kHz are handled by the newly developed S-ART tweeter, which is elaborately handcrafted in Berlin. Combined with the new HPS precision waveguide and a 50 W Class A/B amplifier, the tweeter produces an impressively transparent sound panorama with a wide sweet spot.The DSP board specially developed for the S series includes a perfectly tuned crossover for an extremely linear frequency response. Furthermore, two parametric shelving filters (one for the bass, one for the treble) and six additional fully parametric EQs with variable slope allow the monitor to be customised to the room or individual preferences. A special feature of the S3H is a preset that emulates the playback characteristics of the legendary ADAM S3A. In addition, the DSP offers limiter-based protection mechanisms for the tweeter amplifier, digital AES3 inputs and various options for future expansions. Software updates and digital control via the computer are very easy via the USB port.The S3H with its 3-way system and powerful amplifier units is optimally configured for horizontal use as a midfield monitor, but can also be used in more compact rooms thanks to its excellent reproduction capability of the sound signals fed into it. As with all ADAM Audio monitors, the sound characteristics of the S3H are both powerful and musical, with crystal clear reproduction of the critical mid frequencies. The wide frequency response of the S3H and the high power reserves of the amplifier units allow it to operate without an additional subwoofer: an option for all sound professionals looking for a full-frequency monitoring system that gives them accurate information about audio signals, whether at high or low sound pressure levels.Whatever the preferred level when working, the vivid authenticity of the S3H is a stimulus for the creativity of producers, engineers and musicians. The design is such that there are no signs of fatigue, even when working over long periods of time.

The Sub10 Mk2 is a powerful active subwoofer that extends the playback range of nearfield and midfield monitors down to 25 and 22 Hz respectively.Robust special woofers with a large excursion and a heavy-duty voice coil have been optimised for precise reproduction in a bass reflex enclosure. The downward-firing bass reflex tube avoids disruptive wind noise thanks to its generous dimensions and shape. The PWM amplifier achieves an efficiency of over 90%, so that even critical passages can be completed over long periods without overheating. An additional output allows any number of subwoofers to be cascaded.There are control options for volume (-60 to +6 dB) and phase switching (180°). Furthermore, the upper cut-off frequency of the subwoofer can be variably adjusted (50 - 150 Hz). A filter can be switched on for the satellite outputs, which blocks the signals from the satellites below 85 Hz, for example to reproduce a film soundtrack in accordance with Dolby® and relieve them of the low frequencies. It is also possible to either switch the subwoofer on or off manually or have it switch on automatically as soon as it receives signals (signal-on/continuous).For medium-sized and larger control rooms, this subwoofer offers an excellent combination of low cut-off frequency (-3 dB at 25 Hz) and high undistorted sound pressure (113 dB SPL at 1m).

The Sub15 is an extremely powerful subwoofer that extends the playback range of main and midfield monitors down to 20 Hz. The robust woofer chassis (diameter: 390 mm) with an extremely rigid aluminium cone is driven by a powerful magnet and a 100 mm voice coil. With an output of 1000 watts RMS, the PWM amplifier achieves an efficiency of approx. 90% - this means that the Sub15 also masters critical passages with high and impulsive bass components without distortion and without overheating. The downward-firing bass reflex tube avoids disturbing flow noise thanks to its generous dimensions and corresponding rounding.The volume (-60 to +6 dB) and the upper cut-off frequency of the subwoofer (50-150 Hz) can be adjusted to adapt the sound to different room conditions and individual requirements. The satellites can be controlled either full-range or via a high-pass filter at 85 Hz. This allows the Sub15 to be perfectly integrated into a Dolby-compliant surround monitoring system, for example.Furthermore, unfavourable phase ratios between the satellites and subwoofer, especially in the crossover range, can be controlled by a switchable phase inversion on the subwoofer. The Sub15 is also flexible when it comes to connection options: all inputs and outputs are both balanced (XLR) and unbalanced (RCA or RCA).The Sub15 combines outstanding impulse fidelity with an impressive bass impression and thus achieves the greatest possible authenticity in music reproduction. With a high, undistorted sound pressure level of 120 dB max SPL at 1 m, it is the perfect subwoofer for medium-sized and larger control rooms.

The T10S is a powerful yet compact 10-inch active subwoofer designed to extend the bass response of nearfield monitors. At the same time, the subwoofer's performance, features and connectivity are specifically matched to ADAM Audio's T5V and T7V studio monitors.Equipped with a down-firing 10˝ woofer and a superior 130 watt Class D amplifier, the T10Soffers a frequency response of 28 Hz to 120 Hz and an impressive maximum sound level of 104 dB SPL. An adjustable low-pass filter can be used to adapt the bass signal to the monitors in order to get the best out of the overall system. Further adjustment options on the rear of the subwoofer allow it to be adapted to the room acoustics or the satellite speakers.Visually, the T10S follows the clear lines of the T series and its dimensions make it one of the most compact subwoofers in its class. This makes it easy to integrate into any studio environment. The acoustic performance has been optimised by means of four decoupling rubber feet and a generously dimensioned bass reflex port.

The T8V is a professional studio monitor with an 8" bass/midrange driver and an excellent price/performance ratio. This 2-way system relies on the proven technology, features and build quality of its smaller siblings T5V and T7V and offers the best sound characteristics and ample power reserves in its class.The T8V impresses with features with real added value for the user: the wide dynamic range of the new Class D amplifiers and the 4:1 speed ratio of the U-ART tweeter result in a maximum peak sound pressure level of 118 dB per pair. The dispersion characteristics of the U-ART tweeter, which plays up to 25 kHz, are optimised by the HPS waveguide. This makes it possible to work in a wider usable "sweet spot". With a bass response of up to 33 Hz, the T8V is particularly suitable for users who primarily produce bass-heavy music.The T8V is the perfect studio loudspeaker for anyone who has always wanted to work with an 8" monitor from ADAM Audio but has not yet had sufficient budget.

The Sub12 is a powerful active subwoofer that extends the playback range of nearfield and midfield monitors down to 22 Hz.A robust special woofer with a large excursion and a heavy-duty voice coil has been optimised for precise reproduction in a bass reflex enclosure. The downward-firing bass reflex tube avoids disturbing wind noise thanks to its generous dimensions and shape. The PWM amplifier achieves an efficiency of over 90%, so that even critical passages can be completed over long periods without overheating. An additional output allows any number of subwoofers to be cascaded.For medium-sized and larger control rooms, this subwoofer offers an excellent combination of low cut-off frequency (-3 dB at 22 Hz) and high undistorted sound pressure (115 dB SPL at 1m).

The A8H is the top model in the A series. This 3-way loudspeaker delivers maximum resolution and sonic precision - perfect for the most demanding monitoring tasks. The A8H features an 8-inch woofer made from multi-layer mineral fibre material (MLM), an innovative midrange driver and ADAM Audio's handcrafted X-ART tweeter. Like all models in the A-Series, the A8H offers innovative features for individual customisation to suit personal listening habits and the acoustic environment: this is ensured by a rotatable HPS waveguide and integrated DSP technology. The A8H is suitable for all conceivable listening situations in medium-sized and larger rooms. It is the perfect choice when the highest possible fidelity is required

The S3V is a studio monitor with a 3-way system, designed for vertical use in the midfield, but can also be used in smaller working environments due to its excellent sound characteristics.A newly developed 9" woofer operates in the low frequency range from 32 Hz to 250 Hz. Thanks to the ELE and SMA technologies introduced with the new S series, this delivers a powerful and extremely precise low bass. In the mid and high frequencies, the 4" DCH midrange driver newly developed by ADAM Audio paired with the S-ART tweeter ensures a detailed, analytical sound. The HPS waveguide of the tweeter allows monitoring in a wide sweet spot and provides a fine representation of the stereo image and the depth gradation.The DSP board specially developed for the S series includes a perfectly tuned crossover for an extremely linear frequency response. Furthermore, two parametric level filters (one for the bass, one for the treble) and six additional fully parametric EQs with variable slope allow the monitor to be customised to the room or individual preferences. In addition, the DSP offers limiter-based protection mechanisms for the tweeter amplifier, digital AES3 inputs and various options for future expansions. Software updates and digital control via the computer are very easy via the USB port.Sufficient power reserves are provided by the PWM amplifiers for the bass and mid-range drivers with 500 W and 300 W respectively, as well as a 50 W A/B tweeter amplifier.The S3V is characterised by incorruptible reproduction over a wide frequency range from 32 Hz to 50 kHz. If you are looking for a natural sound image, this monitor provides precise feedback on the structure of the acoustic stage.

The A8H is the top model in the A series. This 3-way loudspeaker delivers maximum resolution and sonic precision - perfect for the most demanding monitoring tasks. The A8H features an 8-inch woofer made from multi-layer mineral fibre material (MLM), an innovative midrange driver and ADAM Audio's handcrafted X-ART tweeter. Like all models in the A-Series, the A8H offers innovative features for individual customisation to suit personal listening habits and the acoustic environment: this is ensured by a rotatable HPS waveguide and integrated DSP technology. The A8H is suitable for all conceivable listening situations in medium-sized and larger rooms. It is the perfect choice when the highest possible fidelity is required

ADAM has developed a special kind of subwoofer for large control rooms and film studios: The Sub2100 combines a huge 543 mm diameter woofer and a power amplifier with 1000 watts RMS in a bass reflex cabinet tuned to 18 Hz. As the efficiency of this woofer is extraordinarily high (99 dB/W/m) and the power output is immense, this system can generate a sound pressure level of 128 dB SPL (!) at one metre, without any significant compression, linearly and powerfully down to 18 Hz.World's largest voice coil:What makes this woofer so fascinating, however, is the world's largest voice coil at 150 mm: The Sub2100 thus achieves the highest sound pressures in the lowest sound ranges that can be perceived by the human ear, setting new standards in the subwoofer sector.

The D3V is a fully active desktop monitor system designed for composers, producers and music lovers who want to enjoy ADAM Audio's sound quality as comfortably as possible. Available in white or black, the active monitors feature the legendary gold-coloured ribbon tweeter and remain true to ADAM Audio's established German industrial design.Each pair of active speakers features 3.5-inch aluminium bass-midrange drivers and a ferrite magnet system powered by 80-watt amplifiers. The bass-midrange drivers are complemented by double-sided 3.5-inch passive radiators, giving the D3V an extended frequency response down to 45 Hz.With 25 years of experience in the design and manufacture of ribbon tweeters, ADAM Audio has designed the compact 1.5-inch D-ART (Desktop Accelerated Ribbon Tweeter). It enables the precise, unagitated high-frequency reproduction for which the manufacturer's established monitors are known.The D3V has a USB-C input. Accordingly, the monitor system behaves like a digital output device when connected to a computer and does not require an additional audio interface for playback. This plug-and-play functionality also extends to mobile devices, so that high-quality sound reproduction can be enjoyed without the data compression or conversion typically associated with such connections. The D3V also features balanced 6.35 mm TRS inputs for conventional analogue audio applications.The rear of the left speaker has a series of user-friendly switches to solve the typical acoustic problems associated with speaker placement. The front panel also features a headphone jack and a volume control that simultaneously controls audio input selection, muting and other functions.The D3V comes complete with detachable monitor stands, which are inclined at an angle of 15° in the direction of the user's ears. In addition, there is a standardised 3/8" thread on the bottom of both monitors for mounting on microphone stands.Fully active 3.5-inch aluminium bass-midrange driver with ferrite magnet systemOptimised via ADAM Audio's state-of-the-art Klippel measurement system, the extremely symmetrical voice coils and ferrite magnets help to minimise unwanted distortion and provide a linear drive to the bass-midrange drivers. Each one-piece concave cone is made of ribbed, thick aluminium with a long linear excursion that delivers uncoloured sound even at surprisingly high output levels.The D3V is a fully active design with four amplifier channels and DSP-controlled crossover. The bass-midrange drivers are powered by 80-watt amplifiers, with the link connection cable transmitting an amplified signal to the right speaker.D-ART tweeterA quarter of a century of research and development into ribbon tweeters has led to the development of ADAM Audio's powerful 1.5" Desktop Accelerated Ribbon Tweeter. Each diaphragm is hand-folded and bonded to 40W amplifiers that drive each unit. Like all other ADAM Audio tweeters, the D-ART features a fine-tuned crossover managed by a high-precision signal processor.Passive radiatorThe D3V utilises double-sided passive radiators in each speaker, a total of four per system. Each passive radiator consists of a stainless steel plate as the moving mass and a specially stabilised long excursion rubber surround as the suspension. Together they amplify the lowest frequencies of the loudspeaker through their interaction with the main bass-midrange drivers and thus contribute to an increase in the sound pressure level of the overall system.USB-C direct inputThe D3V is ADAM Audio's most convenient monitor system to date, as it features a plug-and-play USB-C input. The speakers behave like a digital output device when connected to a computer, mobile phone or tablet, eliminating the need for an additional audio interface. This direct digital connection enables high-quality audio playback without the data compression or additional conversion typically associated with desktop monitors.DSP room acousticsThere are three switches on the rear panel of the left speaker to counteract the typical acoustic problems resulting from speaker placement. "POSITION" refers to the fixed position of the speaker in the room. "DESK" refers to the size of the desk in front of the speaker, while "ROOM" refers to the degree of acoustic damping in the room in which the system is used.Balanced analogue inputsIn addition to the USB-C input, the D3V has analogue inputs for conventional audio applications. It enables balanced connections to audio interfaces as well as direct connections to a wide range of hardware, including synthesisers, drum machines, samplers and DJ mixing consoles. The USB-C connection or the balanced analogue inputs can be selected by pressing the volume control on the left speaker.Headphone output, monitor stand and mounting optionsFunctionality and convenience played a major role in the design of the D3V. The headphone output on the front automatically takes over audio playback when connected. Monitor stands angled at 15° are also included. In addition, there is a standardised 3/8" thread on the underside of both monitors for mounting on microphone stands.Injection moulded housingThe housing of the D3V is made of high-quality ABS injection-moulded polycarbonate with thick walls and ample bracing to prevent vibrations and unwanted resonances. The rounded shape reduces unwanted sound diffraction at high frequencies while honouring ADAM Audio's long-established industrial design.

The A77H is a true midfield monitor in a 3-way design and thus the logical further development of the A77X. Thanks to the latest ADAM Audio technology, it also sets new standards in terms of richness of detail and spatial representation. Two 7-inch woofers, a midrange driver and ADAM Audio's X-ART tweeter provide the widest frequency range within the A-Series speakers. The additional midrange driver ensures precise reproduction of the mid-frequency range, which is particularly sensitive to human hearing. The rotatable HPS waveguide and the integrated DSP also allow the A77H to be precisely customised to individual acoustic requirements.

The S2V is a classic 2-way system, developed for use in the near-field range. It is therefore perfectly designed for the requirements of small to medium-sized control rooms.A newly designed 7" woofer operates in the range from 35 Hz to 3 kHz and delivers a distortion-free foundation with a wide dynamic range thanks to innovative, modern ELE and SMA technology. The symbiotic interplay between the newly developed S-ART tweeter, which is handcrafted in Berlin, and the HPS waveguide ensures precise definition of the stereo image within a generously dimensioned sweet spot.The compact cabinet houses a 300 W PWM amplifier for the woofer and a 50 W power unit with A/B function for the S-ART tweeter, which deliver a maximum sound pressure level of 120 dB SPL per pair.The DSP board specially developed for the S-Series includes a perfectly tuned crossover for an extremely linear frequency response. Furthermore, two parametric level filters (one for the bass, one for the treble) and six additional fully parametric EQs with variable slope allow the monitor to be customised to the room or individual preferences. In addition, the DSP offers limiter-based protection mechanisms for the tweeter amplifier, digital AES3 inputs and various options for future expansions. Software updates and digital control via the computer can be easily carried out via the USB port.With its excellent impulse response and balanced sound image, the S2V makes it easy to localise individual sound events, making it an ideal solution for demanding studio environments.

Optimised for small studio spaces, short listening distances and immersive multi-channel playback, the compact A4V delivers extremely precise and powerful sound. This 2-way speaker also utilises ADAM Audio's renowned X-ART tweeter. It is equipped with a 4-inch bass-midrange driver whose cone - as with all A-Series models - is made from an extremely lightweight yet extremely stable mineral fibre material (MLM). Thanks to DSP technology, the A4V delivers perfect sound in a wide variety of listening environments in no time at all. Its frequency response of 53 Hz to 42 kHz qualifies it for a wide range of applications - from podcast production to mixing a string quartet. The A4V is also perfect for multi-channel systems.