Gravity MA VARIARM M 38
€39.00
card.manufacturer:
In the past, anyone who wanted to produce music, videos or other content professionally had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums can be recorded at home or spontaneously on the go. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.With the VARI®-ARM M 38, Gravity® has created such a universal tool that allows you to use a wide variety of devices - from a microphone clip to a tablet or an action cam - almost anywhere and in any orientation in a matter of seconds.The VARI®-ARM M 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. The highlight: you only need one adjusting screw to lock and unlock the three joints. As soon as you have found your desired position, tighten the adjusting screw and all elements of the VARI®-ARM M 38 remain firmly and securely in position - thanks to a load capacity of 3 kilograms, even with DSLM cameras including a standard lens or a heavyweight microphone such as the broadcast classic RE-20.At the top end of the VARI®-ARM is a 3/8" thread onto which you can screw a microphone clamp, a pop filter and more. You are completely flexible with the included adapter (3/8" to 1/4" reduction thread) with which you can use almost any photo camera on the market, a handheld recorder or a smartphone holder with the VARI®- ARM M 38. Thanks to the solid clamp with a wide 15 to 35 mm clamping range at the lower end, the VARI®- ARM can also be easily attached to most tables and tubes (e.g. tripods). The clamp can also be unscrewed to reveal a 3/8" thread for screwing on the VARI®-ARM itself.As a universal tool for your creative applications, there are virtually no limits to the uses of the VARI®-ARM M 38.
DPA AIR1-BLACK-L
€49.00
card.manufacturer:
A professional windscreen for lavalier and headworn microphones with a patent-pending design that guarantees quick installation, highly efficient and reliable protection against wind and unrivalled acoustic transparency. Fits round, omnidirectional miniature microphones with a diameter of 2.5 to 5.8 mm
DPA AIR1-BEIGE-S
€49.00
card.manufacturer:
A professional windscreen for lavalier and headworn microphones with a patent-pending design that guarantees quick installation, highly efficient and reliable protection against wind and unrivalled acoustic transparency. Fits round, omnidirectional miniature microphones with a diameter of 2.5 to 5.8 mm
DPA AIR1-BLACK-S
€49.00
card.manufacturer:
A professional windscreen for lavalier and headworn microphones with a patent-pending design that guarantees quick installation, highly efficient and reliable protection against wind and unrivalled acoustic transparency. Fits round, omnidirectional miniature microphones with a diameter of 2.5 to 5.8 mm
DPA AIR1-BEIGE-L
€47.00
card.manufacturer:
A professional windscreen for lavalier and headworn microphones with a patent-pending design that guarantees quick installation, highly efficient and reliable protection against wind and unrivalled acoustic transparency. Fits round, omnidirectional miniature microphones with a diameter of 2.5 to 5.8 mm
Austrian Audio OC707 WL1
€429.00
card.manufacturer:
The open, clear yet powerful sound of the OC707 is now also available for wireless microphones. The OC707 WL1 gives your voice great volume and allows it to stand out clearly in the mix with all its facets, without overemphasising them. The microphone is perfectly tuned to the human voice. The proximity effect has been designed for optimum usability in every performance, while the basic open character of the voice is always retained.Until now, the outstanding OCC7 small diaphragm capsule, handmade in Vienna, was only allowed to shine in the wired Austrian Audio OC707. To make this fantastic, brilliant sound available to more artists, Austrian Audio now also offers the OC707 WL1 microphone head for Shure wireless systems. All the advantages of the Open Acoustic design are also fully utilised on the wireless transmitter.
Shure UA8-2.4-5.8
€44.00
card.manufacturer:
New, omnidirectional dual-band 45° antenna (2.4 and 5.8 GHz) for use with GLX-D+ dual-band radio systems. Compatible with GLXD4R+ receiver and GLXD+FMDB frequency manager.
Shure SBC10-904-E
€55.00
card.manufacturer:
The battery charging cradle can be powered by an AC adapter or via a USB port to charge a Shure SB904 lithium-ion battery for use with GLX-D+ transmitters.
Neumann MC 6 Universal Clamp Clip
€99.00
card.manufacturer:
Universal clip for attaching the capsule and gooseneck of the Neumann Miniature Clip Mic MCM system to the bell of a trumpet, trombone, saxophone, horns, percussion instruments and standpipes. The holder for the gooseneck can be rotated on two axes for variable alignment and locks securely into place in 45° increments.
Neumann WS 100 sw - KM100 Series 100mm
€59.00
card.manufacturer:
Windscreens made of open-cell polyurethane foam are available to prevent interference noise that can occur during close miking, wind influence or, for example, when the microphone boom is swivelled quickly. These windscreens do not generate any disturbing resonances and do not influence the directional characteristic of the microphone. The transmission level is slightly attenuated in the upper frequency range. The attenuation of the wind noise was measured without an electrical filter in a turbulent air flow at a speed of 20 km/h, generated by a noiseless wind machine. Windscreen for KM 100 and Series 180, diameter approx. 90 mm. Attenuation of wind noise approx. 23 dB. Attenuation at 15 kHz approx. 4 dB. Colour black.
DPA AIR1-WHITE-S
€47.00
card.manufacturer:
A professional windscreen for lavalier and headworn microphones with a patent-pending design that guarantees quick installation, highly efficient and reliable protection against wind and unrivalled acoustic transparency. Fits round, omnidirectional miniature microphones with a diameter of 2.5 to 5.8 mm
Mackie M48
€69.99
card.manufacturer:
With the M48 48v Phantom Power Supply, you can use your devices and microphones that require an external power supply in any setup. Sometimes even phantom power is insufficient, and with the M48 you always get clean, full 48 V for the best sound and noise performance. Powered by either a 9 V battery or the supplied mains adapter.
Neumann MC 2 Strings Clip Cello
€69.00
card.manufacturer:
Clamp for attaching the capsule and gooseneck of the Neumann Miniature Clip Mic MCM system to the strings below the bridge of a cello. The holder for the gooseneck can be rotated for variable alignment and locks securely into place in 45° increments.
Fischer Amps Drum In Ear Amp 2 with Bass Pump III
€729.00
card.manufacturer:
The complete package for drummers when it comes to in-ear monitoring. Especially when it comes to bass, the Drum InEar Amp has a real advantage over a conventional in-ear system thanks to its Bass Pump 3 bass shaker.
K&M 16330
€8.90
card.manufacturer:
Practical headphone holder for mounting under a table. Solid, angled metal construction for convenient hanging of headphones. The large rubber-coated holder protects the headphones from damage and ensures a secure hold. Two wood screws are included in the scope of delivery.
DPA AIR1-BROWN-L
€48.00
card.manufacturer:
A professional windscreen for lavalier and headworn microphones with a patent-pending design that guarantees quick installation, highly efficient and reliable protection against wind and unrivalled acoustic transparency. Fits round, omnidirectional miniature microphones with a diameter of 2.5 to 5.8 mm